| Código |
Descripción |
Disponibilidad |
| BR Pedido Mínimo |
; Minimun order charge |
|
| Condiciones |
; Condiciones de oferta |
|
| Elap Charge |
; Elap charge |
|
| IAI Charge |
; IAI charge |
|
| IAI Pedido Mínimo |
; Minimun order charge |
|
| IAI Urgent Charge |
; IAI urgent charge |
|
| Incoterms DAP Península < 10kg |
; Incoterms DAP (Delivered at Place) Península; Gastos de transporte pagados a destinos peninsulares; Seguro de transporte incluido; Gastos de empaquetado incluido; Peso máximo 10kg, volumen máximo 40l; Validez de la oferta 30 días.; Los pedidos con impo |
|
| Incoterms DAP Península < 250kg |
; Incoterms DAP (Delivered at Place) Península
Gastos de transporte pagados a destinos peninsulares
Seguro de transporte incluido
Gastos de empaquetado incluido
Peso máximo 50kg, volumen máximo 200l |
|
| Incoterms DAP Península < 50kg |
; Incoterms DAP (Delivered at Place) Península
Gastos de transporte pagados a destinos peninsulares
Seguro de transporte incluido
Gastos de empaquetado incluido
Peso máximo 50kg, volumen máximo 200l |
|
| Incoterms EXW Larraioz Elektronika |
; Shipping from Larraioz Elektronika - FACT to destination not included in this offer |
|
| KR Charge |
; Kawasaki charge |
|
| KR Urgent Charge |
; Kawasaki urgent charge |
|
| LinMot Charge |
; LinMot charge |
|
| LinMot Pedido Mínimo |
; Minimun order charge |
|
| LinMot Urgent Charge |
; LinMot urgent charge |
|
| Smac Charge |
; SMAC charge |
|
| Smac Pedido Mínimo |
; Minimun order charge |
|
| TEXTO |
; |
|
| 050002017-03 |
; |
|
| 0AC100.9 |
System 2005 - Accessories; NiCd rechargeable batteries
5 pieces, 3.6 V / 60 mAh |
|
| 0AC100.91 |
; |
|
| 0AC200.9 |
Accessories System 2000 - Hardware; Lithium batteries
5 pieces, 3 V / 950 mAh
tubular cell |
|
| 0AC200.91 |
; |
|
| 0AC201.91 |
; Lithium Battery, 3 V / 950 mAh
button cel |
|
| 0AC401.9 |
Accessories System 2000 - Hardware; Encoder 5 V - 24 V
Converter for 5 V encoders (absc./incr.)
terminal blok (7TB710.9) not include
|
|
| 0AC808.9 |
Accessories System 2000 - Hardware; 8x Industrie-Hub (Layer 2), 24 VDC,
10/100 Mbps with autosensing,
MDIX-Switch at channel 1,
order terminal block TB704 separately! |
|
| 0AC808.9-1 |
Accessories System 2000 - Hardware; 8x Industrie-Hub (Layer 2), 24 VDC,
10/100 Mbps with autosensing,
MDIX-Switch at channel 1,
order terminal block TB704 separately! |
|
| 0AC916.9 |
Accessories System 2000 - Hardware; Bus termination, RS485, active
For PROFIBUS networks, Remote I/O
Standard mounting rail
Supply voltage: 120 / 230 VAC |
|
| 0G0001.00-090 |
Accessories System 2000 - Hardware; Cable PC <-> PCC/PW, RS232
Online cable |
|
| 0G0010.00-090 |
Accessories System 2000 - Hardware; Cable I/O bus expansion, 1 m
Local expansion for B&R 2005 / B&R 2010 |
|
| 0G0012.00-090 |
Accessories System 2000 - Hardware; Cable I/O bus expansion, 2 m
Local expansion for B&R 2005 / B&R 2010 |
|
| 0G1000.00-090 |
Accessories System 2000 - Hardware; Bus connector, RS485
For PROFIBUS networks, Remote I/O |
|
| 0G2001.00-090 |
System 2005 - Accessories; 2005 Positioning Accessaries
Cable for Operating System download
direct from the PC into the NC154 |
|
| 0GH-AI350 |
Remplacement; Box AI350 |
|
| 0GH-AI375 |
Remplacement; Box AI375 |
|
| 0GH-AI775 |
Remplacement; Box AI775 |
|
| 0GH-AM050 |
Remplacement; Box AM050 |
|
| 0GH-AM374 |
Remplacement; Box AM374 |
|
| 0GH-AO350 |
Remplacement; BoxAO350 |
|
| 0GH-AO775 |
Remplacement; Box AO775 |
|
| 0GH-AT350 |
Remplacement; Box AT350 |
|
| 0GH-AT660 |
Remplacement; Box AT660 |
|
| 0GH-BP155 |
Remplacement; Box BP155 |
|
| 0GH-C300-0 |
Remplacement; Box C300-0 |
|
| 0GH-CP153 |
Remplacement; Box CP153 |
|
| 0GH-CP260 |
Remplacement; Box CP260 |
|
| 0GH-CP360 |
Remplacement; Box CP360 |
|
| 0GH-DI425 |
Remplacement; Box DI425 |
|
| 0GH-DI426 |
Remplacement; Box DI426 |
|
| 0GH-DI450 |
Remplacement; Box DI450 |
|
| 0GH-DI475 |
Remplacement; Box DI475 |
|
| 0GH-DI476 |
Remplacement; Box DI476 |
|
| 0GH-DI477 |
Remplacement; Box DI477 |
|
| 0GH-DI486 |
Remplacement; Box DI486 |
|
| 0GH-DM455 |
Remplacement; Box DM455 |
|
| 0GH-DM476 |
Remplacement; Box DM476 |
|
| 0GH-DM486 |
Remplacement; Box DM486 |
|
| 0GH-DO428 |
Remplacement; Box DO428 |
|
| 0GH-DO430 |
Remplacement; Box DO430 |
|
| 0GH-DO479 |
Remplacement; Box DO479 |
|
| 0GH-DO480 |
Remplacement; Box DO480 |
|
| 0GH-DO486 |
Remplacement; Box DO486 |
|
| 0GH-DO650 |
Remplacement; Box DO650 |
|
| 0GH-EX150 |
Remplacement; Box EX150 |
|
| 0GH-EX250 |
Remplacement; Box EX250 |
|
| 0GH-EX301 |
Remplacement; Box EX301 |
|
| 0GH-IF060 |
Remplacement; Box IF060 |
|
| 0GH-IF152 |
Remplacement; Box IF152 |
|
| 0GH-IF260 |
Remplacement; Box IF260 |
|
| 0GH-ME963 |
Remplacement; Box ME963 |
|
| 0GH-NC150 |
Remplacement; Box NC150 |
|
| 0GH-NC154 |
Remplacement; Box NC154 |
|
| 0GH-NC303 |
Remplacement; Box NC303 |
|
| 0GH-NW150 |
Remplacement; Box NW150 |
|
| 0GH-PS425 |
Remplacement; Box PS425 |
|
| 0GH-PS465 |
Remplacement; Box PS465 |
|
| 0GH-PS476 |
Remplacement; Box PS476 |
|
| 0GH-UM161 |
Remplacement; Box UM161 |
|
| 0GH-XP152 |
Remplacement; Box XP152 |
|
| 0MC111.9 |
Accessories System 2000 - Hardware; PCMCIA memory card, 2 MB FlashPROM |
|
| 0MC211.9 |
Accessories System 2000 - Hardware; PCMCIA memory card, 2 MB SRAM |
|
| 0PS110.1 |
Accessories System 2000 - ; 24 VDC Power Supply, 1 phase, 10 A,
Input 115/230 VAC, Manual Select,
DIN Rail Mounting |
|
| 0PS310.1 |
Accessories System 2000 - ; 24 VDC Power Supply, 3 phases, 10 A,
Input 400..500 VAC (3 phases),
Wide Range,
DIN Rail Mounting |
|
| 0PS3100.1 |
Accessories System 2000 - ; 24 VDC Power Supply, 3 phases, 10 A,
Input 400..500 VAC (3 phases),
Wide Range,
DIN Rail Mounting |
|
| 0PS320.0 |
24 Vdc Power Supply; 3 phases, 20A, Input 400..500Vac (3 phases), Wide Range, Din Rail Mounting |
|
| 0PS320.1 |
Accessories System 2000 - ; 24 VDC Power Supply, 3 phases, 20 A,
Input 400..500 VAC (3 phases),
Wide Range,
DIN Rail Mounting |
|
| 0PS3200-1 |
Accessories System 2000 - ; 24 VDC Power Supply, 3 phases, 20 A,
Input 400..500 VAC (3 phases),
Wide Range,
DIN Rail Mounting |
|
| 0RMSM1145 |
Mantenimiento remoto; Secure Remote Maintenance -SiteManager, Wi-Fi 1x Ethernet 100BASE-T uplink port, 1x Wi-Fi uplink port, 5 device agents, integrated firewall, 2x digital inputs, 2x digital outputs, 24 VDC |
|
| 0TB103.3 |
Accessories System 2000 - Cage Clamp Terminal Blocks; |
|
| 0TB103.9 |
Accessories System 2000 - Screw Terminal Blocks; Accessory terminal block, 3 pins,
screw clamp, 1.5 sq. mm
protected against vibration by the
screw flange. |
|
| 0TB103.91 |
Accessories System 2000 - Cage Clamp Terminal Blocks; Accessory terminal block, 3 pins,
screw clamp, 2.5 sq. mm
protected against vibration by the
screw flange. |
|
| 0TB104.9 |
B&R2000 TERMINAL BLOCK; Accessory terminal block, 4 pins, screw clamp 1,5 sq.mm |
|
| 0TB104.91 |
B&R2000 TERMINAL BLOCK; Accessory terminal block, 4 pin, cage clamp, 2.5 mm2 |
|
| 0TB1111.8010 |
Terminal block; Accessory terminal block, 11-pin, screw clamps 1.5 mm², protected against vibration by the screw flange |
|
| 0TB124.91 |
Accessories System 2000 - Cage Clamp Terminal Blocks; Accessory terminal block, 2x12 pins,
cage clamp 1,0 qmm |
|
| 0TB2105.9010 |
X20 TERMINAL BLOCK; Accessory terminal block, 5 pin, screw clamp, 2.5 mm2 |
|
| 0TB2105.9110 |
X20 TERMINAL BLOCK; Accessory terminal block, 5 pin, cage clamp, 2.5 mm2 |
|
| 0TB5104-2110-01 |
Accessories System X20; Accessory terminal block, 4-pin, (2,5), cage clamps 0,5 mm² |
|
| 0TB6102-2110-01 |
Accessories System X20; Accessory terminal block, 2-pin, (3,81), cage clamps 1,5 mm² |
|
| 0TB704.9 |
Accessories System 2000 - Screw Terminal Blocks; Accessory terminal block, 4 pins,
screw clamp, 1.5 sq. mm |
|
| 0TB704.91 |
Accessories System 2000 - Cage Clamp Terminal Blocks; Accessory terminal block, 4 pins,
cage clamp, 2.5 sq. mm |
|
| 0TG1000.02 |
Automation Panel AP1000; Technology Guard (HID) is available for the USB device class HID (human interface device) |
|
| 0TG:SWAS.SNG.01-01 |
; Automation studio resell license, only for mantain and diagnose, this licence does not expire |
|
| 1A2000.01 |
B&R System Software 2000 - Development Systems; PG2000 programming software |
|
| 1A4000:L1 |
B&R System Software 2000 - Development Systems; B&R AutomationSoftware set single |
|
| 1A4300.L1EN-402 |
B&R System Software - Development Systems; B&R AutomationStudio 4.2 single user, English package, includes SafeDESIGNER 3.0 and one year upgrade-service 1A4300.U1EN-400 free of charge. |
|
| 1A4300:LU |
B&R System Software 2000 blac- Development Systems; B&R AutomationSoftware Enterprise licence |
|
| 1A4600.10 |
B&R System Software 2000 - Operating Systems; B&R Automation Runtime AR010
incl. License Label and Security Key |
|
| 1A4600.10-2 |
B&R System Software 2000 - Operating Systems; B&R Automation Runtime AR010, ARNC0 |
|
| 1A4601.02 |
B&R System Software 2000 - Operating Systems; B&R Automation Runtime AR102
incl. License Label and Security Key |
|
| 1A4601.02-2 |
B&R System Software 2000 - Operating Systems; B&R Automation Runtime AR102, ARNC0 |
|
| 1A4601.05 |
B&R System Software 2000 - Operating Systems; B&R Automation Runtime AR105
incl. License Label and Security Key |
|
| 1A4601.06-2 |
B&R System Software 2000 - Operating Systems; B&R Automation Runtime AR106, ARNC0 |
|
| 1E0110.01-090 |
Panelware - Software; PANELWARE configuration software
WYSIWYG editor for intelligent
panel controllers
Driver for B&R MININET, B&R MININET
SPOIO and B&R System 2000 |
|
| 1TG0500.02 |
Automation Panel AP1000; PVI Security Key TG |
|
| 1TGACP0000.00-01 |
Software; Licensefor 1 ACOPOS P3 technology function per axis |
|
| 1TGMPASSET.20-01 |
; mapp Asset Intensity collects all of a machine's statistical data. This data is then displayed in an HMI application in either a table or graph format for further analysis |
|
| 1TGMPSRV.00-01 |
; Basic license for Mapp services Required to use extendec functions of the mapp Technology package. This license includes Mapp AlarmX(alarm management), Mapp IO (dynamic hardware configuration), mapp. |
|
| 1TGSWAS.SNG.00-01 |
; Automation studio single license, anual fee |
|
| 2BM100.9 |
System 2010 - Accessories; 2010 dummy module |
|
| 2BP101.3 |
System 2010 - Backplanes; 2010 base plate module
2 slots for system modules |
|
| 2BP200.4 |
System 2010 - Backplanes; 2010 base plate module
1 slot for I/O module |
|
| 2BP201.4 |
System 2010 - Backplanes; 2010 base plate module
4 slots for I/O modules |
|
| 2BP202.4 |
System 2010 - Backplanes; 2010 base plate module
1 slot for expansion or remote slave |
|
| 2BP210.4 |
System 2010 - Backplanes; 2010 base plate module
1 slot for I/O module
With bus termination for I/O bus |
|
| 2BP300.4 |
System 2010 - Backplanes; 2010 base plate module
2 slots for CPU
With bus termination for system bus |
|
| 2CP100.60-1 |
System 2010 - CPU Systems; 2010 CPU
128 + 256 KB SRAM
1 RS232 interface
1 electrically isolated RS232/TTY
1 electrically isolated RS485/RS422
RS485/RS422: network-capable
Order application memory separately! |
|
| 2CP200.60-1 |
System 2010 - CPU Systems; 2010 CPU
128 KB + 2 MB SRAM, 2 x 4 KB Cache
1 RS232 interface
1 electrically isolated RS232 interface
1 electrically isolated RS485/RS422
1 electrically isolated CAN interface
RS485/RS422 + CAN: network-capable
Order application |
|
| 2DI425.6 |
System 2010 - Digital Input Modules; 2010 digital input module
32 inputs 24 VDC, 10 msec, sink/source
8 electrically isolated input groups
Order terminal block 1 x TB140
separately! |
|
| 2DI426.6 |
System 2010 - Digital Input Modules; 2010 digital input module
32 inputs 24 VDC, 1 msec, sink/source
8 electrically isolated input groups
Order terminal block 1 x TB140
separately! |
|
| 2DO428.6 |
System 2010 - Digital Output Modules; 2010 digital output module
32 transistor outputs 24 VDC, 0.5 A
4 electrically isolated output groups
Order terminal block 1 x TB140
separately! |
|
| 2DO430.6 |
System 2010 - Digital Output Modules; 2010 digital output module
32 transistor outputs 24 VDC, 2 A
4 electrically isolated output groups
Order terminal block 1 x TB140
separately! |
|
| 2DS101.60-1 |
System 2010 - Programmable Modules; 2010 electronic drum sequencer
Absolut encoder, SSI/parallel, 16 bit
3 diff. inputs, RS422 level, 100 kHz
3 diff. outputs, RS422 level, 100 kHz
16 digital inputs 24 VDC, 5 µsec, sink
32 digital outputs 24 VDC, 0.5 A
Ord |
|
| 2EX301.5 |
System 2010 - Bus Controller Modules; 2010 expansion slave
I/O bus divided into bus segments
Order expansion cable separately! |
|
| 2EX302.5 |
System 2010 - Bus Controller Modules; 2010 expansion master
I/O bus divided into bus segments
Order expansion cable separately! |
|
| 2ME910.90-1 |
System 2010 - Memory Modules; 2010 application memory
64 KB SRAM, 256 KB FlashPROM
With PCC operating system |
|
| 2ME913.90-1 |
System 2010 - Memory Modules; 2010 application memory
512 KB SRAM, 1 MB FlashPROM
With PCC operating system |
|
| 2ME915.90-1 |
System 2010 - Memory Modules; 2010 application memory
2 MB SRAM, 2 MB FlashPROM
With PCC operating system |
|
| 2NC303.60-1 |
System 2010 - Counter and Positioning Modules; 2010 ultrasonic transducer module
1 pulse encoder input, 700 Hz, 24 VDC
4 ultrasonic transducer inputs, 56 MHz
4 digital inputs 24 VDC, 10 msec, sink
4 transistor outputs 24 VDC, 1 A
4 analog inputs 0 to 10 V |
|
| 2NW100.50-1 |
System 2010 - Communication Modules; 2010 PROFIBUS network module
2 electrically isolated RS485 interfaces
For connecting to PROFIBUS networks |
|
| 2PS425.9 |
System 2010 - Power Supply Modules; 2010 power supply module
24 VDC, 100 W |
|
| 2PS740.9 |
System 2010 - Power Supply Modules; 2010 power supply module
100-240 VAC, 100 W |
|
| 2TB140.9 |
System 2010 - Accessories; 2010 terminal block, 40 pin
Screw clamp |
|
| 3/V80H |
; Battery DS/Super Sel Controler E/G |
|
| 3AI350.6 |
System 2005 - Analog Input Modules; 2005 analog input module
8 inputs, +/- 10 V, 12 bit
Order terminal block 1 x TB170
separately! |
|
| 3AI375.6 |
System 2005 - Analog Input Modules; 2005 analog input module
8 inputs, 0 to 10 V, 12 bit
Order terminal block 1 x TB170
separately! |
|
| 3AI775.6 |
System 2005 - Analog Input Modules; 2005 analog input module
8 inputs, 0 to 20 mA, 12 bit
Order terminal block 1 x TB170
separately! |
|
| 3AM050.6 |
System 2005 - Analog Mixed Modules; 2005 analog mixed module
4 inputs, 0 to 10 V, 12 bit
4 outputs, +/- 10 V, 12 bit
Order terminal block 1 x TB170
separately! |
|
| 3AM051.6 |
System 2005 - Analog Mixed Modules; 2005 analog mixed module
4 inputs, 0 to 20 mA, 12 bit
4 outputs, 0 to 20 mA, 12 bit
Order terminal block 1 x TB170
separately! |
|
| 3AM055.6 |
System 2005 - Analog Mixed Modules; 2005 analog mixed module
5 inputs, 0 to 10 V, 12 bit
3 outputs, +/- 10 V, 12 bit
1 potentiometer voltage +10 V,
2 potentiometer voltage terminals
Order terminal block 1 x TB170
separately! |
|
| 3AM374.6 |
System 2005 - Analog Mixed Modules; 2005 analog mixed module
4 inputs, 0-10 V / 0-20 mA, 12 bit
4 outputs, +/- 10 V / 0-20 mA, 12 bit
Signals setable in groups of two
Order terminal block 1 x TB170
separately! |
|
| 3AO350.6 |
System 2005 - Analog Output Modules; 2005 analog output module
8 outputs, +/- 10 V, 12 bit
Order terminal block 1 x TB170
separately! |
|
| 3AO775.6 |
System 2005 - Analog Output Modules; 2005 analog output module
8 outputs, 0 to 20 mA, 11 bit
Order terminal block 1 x TB170
separately! |
|
| 3AT350.6 |
System 2005 - Temperature Input Modules; 2005 analog input module
4 inputs, PT100 (3-line connection)
-50 to +450 degrees C
Order terminal block 1 x TB170
separately! |
|
| 3AT450.6 |
System 2005 - Temperature Input Modules; 2005 analog input module
4 inputs, PT100 (4-line connection)
-50 to +450 degrees C
Order terminal block 1 x TB170
separately! |
|
| 3AT660.6 |
System 2005 - Temperature Input Modules; 2005 analog input module
8 inputs, sensor type L/J/K
-200 to +1300 degrees C
Order terminal block 1 x TB170
separately! |
|
| 3BM150.9 |
System 2005 - Accessories; 2005 dummy module |
|
| 3BP150.4 |
System 2005 - Backplanes; 2005 base plate module
15 slots |
|
| 3BP150.41 |
System 2005 - Backplanes; 2005 base plate module
15 slots
With backup battery |
|
| 3BP151.4 |
System 2005 - Backplanes; 2005 base plate module
12 slots |
|
| 3BP151.41 |
System 2005 - Backplanes; 2005 base plate module
12 slots
With backup battery |
|
| 3BP152.4 |
System 2005 - Backplanes; 2005 base plate module
9 slots |
|
| 3BP152.41 |
System 2005 - Backplanes; 2005 base plate module
9 slots
With backup battery |
|
| 3BP155.4 |
System 2005 - Backplanes; 2005 base plate module
6 slots |
|
| 3BP155.41 |
System 2005 - Backplanes; 2005 base plate module
6 slots
With backup battery |
|
| 3CP152.9 |
System 2005 - CPU Systems; 2005 CPU
64 + 256 KB SRAM
1 RS232 interface
1 electrically isolated RS485/RS422/TTY
RS485/RS422: network-capable
1 expansion master interface
Order application memory separately! |
|
| 3CP152.90-2 |
System 2005 - CPU Systems; 2005 CPU
64 + 256 KB SRAM
1 RS232 interface
1 electrically isolated RS485/RS422/TTY
RS485/RS422: network-capable
1 expansion master interface
NC synchronization
Order application memory separately! |
|
| 3CP153.9 |
System 2005 - CPU Systems; 2005 CPU
64 + 256 KB SRAM
1 RS232 interface
1 electrically isolated RS485/RS422/TTY
RS485/RS422: network-capable
Order application memory separately! |
|
| 3CP260.60-1 |
System 2005 - CPU Systems; 2005 CPU
4 MB DRAM, 850 KB SRAM, 512 KB FlashPROM
2 insert slots, 1 PCMCIA slot
1 RS232 interface |
|
| 3CP340.60-1 |
System 2005 - CPU Systems; 2005 CPU,
x86 233 Intel compatible,
16 MB DRAM, 512 kB SRAM,
removable appl. memory: Compact Flash,
1 plug in slot for aPCI-modules,
1 USB interface,
1 RS232 interface,
1 Ethernet interface 100 Base-T,
Order application memory s |
|
| 3CP340.60-2 |
System 2005 - CPU Systems; 2005 CPU, Intel pentium 166,
32 MB DRAM, 512 kB SRAM,
removable appl. memory: Compact Flash,
1 plug in slot for aPCI-modules,
1 USB interface,
1 RS232 interface,
1 Ethernet interface 100 Base-T,
Order application memory separate |
|
| 3CP360.60-1 |
System 2005 - CPU Systems; 2005 CPU,
Pentium 266,
32 MB DRAM, 512 kB SRAM,
removable appl. memory: Compact Flash,
1 plug in slot for aPCI-modules,
1 USB interface,
1 RS232 interface,
1 Ethernet interface 100 Base-T,
Order application memory separately! |
|
| 3CP360.60-2 |
2005 Central Processor; Pentium 266, 32Mb DRAM, 512Kb SRAM, exchangeable application memory: Compact Flash, 1 insert slot for aPCI modules, 1 USB, 1 RS232 interface, 1 Ethernet interface 100 Base-T. Program memory must be ordered separately. |
|
| 3CP380.60-1 |
System 2005 - CPU Systems; 2005 CPU,
Pentium III 500,
64 MB DRAM, 512 kB SRAM,
removable appl. memory: Compact Flash,
1 plug in slot for aPCI-modules,
1 USB interface,
1 RS232 interface,
1 Ethernet interface 100 Base-T,
Order application memory separately |
|
| 3DI475.6 |
System 2005 - Digital Input Modules; 2005 digital input module
16 inputs 24 VDC, 10 msec, sink/source
4 electrically isolated input groups
Order terminal block 1 x TB170
separately! |
|
| 3DI476.6 |
System 2005 - Digital Input Modules; 2005 digital input module
16 inputs 24 VDC, 1 msec, sink/source
4 electrically isolated input groups
Order terminal block 1 x TB170
separately! |
|
| 3DI477.6 |
System 2005 - Digital Input Modules; 2005 digital input module
32 inputs 24 VDC, 1 msec, sink/source
8 electrically isolated input groups |
|
| 3DI486.6 |
System 2005 - Digital Input Modules; 2005 digital input module,
32 inputs 24 VDC, 1 msec, sink/source,
2 electrically isolated input groups,
order terminal blocks 2 x TB718
separately! |
|
| 3DM455.60-2 |
System 2005 - Programmable Modules; 2005 digital mixed module
8 inputs, 24 VDC, 2,5 µsec, sink
8 transistor outputs, 0 to 50 VDC, 1 A
Order terminal block 1 x TB170
separately! |
|
| 3DM476.6 |
System 2005 - Digital Mixed Modules; 2005 digital mixed module
16 inputs, 24 VDC / 24 VAC, 1 msec
DC: sink/source
4 electrically isolated input groups
16 transistor outputs, 24 VDC, 0.4 A |
|
| 3DM486.6 |
System 2005 - Digital Mixed Modules; 2005 digital mixed,
16 inputs 24 VDC, 1 msec, sink/source,
16 transistor outputs 24 VDC, 0,5 A,
in- and output group electr. isolated,
order terminal blocks 2 x TB718
separately! |
|
| 3DO479.6 |
System 2005 - Digital Output Modules; 2005 digital output module
16 transistor outputs 24 VDC, 0.5 A
2 electrically isolated output groups
Order terminal block 1 x TB170
separately! |
|
| 3DO480.6 |
System 2005 - Digital Output Modules; 2005 digital output module
16 transistor outputs 24 VDC, 2 A
2 electrically isolated output groups
Order terminal block 1 x TB170
separately! |
|
| 3DO486.6 |
System 2005 - Digital Output Modules; 2005 Digital output module,
32 transistor outputs 24 VDC, 0,5 A,
2 electrically isolated output groups,
order terminal blocks 2 x TB718
separately! |
|
| 3DO650.6 |
System 2005 - Digital Output Modules; 2005 digital output module
16 relay outputs 120 VAC / 24 VDC, 2 A
4 electrically isolated output groups
Order terminal block 1 x TB170
separately! |
|
| 3DO750.6 |
System 2005 - Digital Output Modules; 2005 digital output module
8 relay outputs 230 VAC / 24 VDC, 3 A
2 electrically isolated output groups
Order terminal block 1 x TB170
separately! |
|
| 3EX150.60-1 |
System 2005 - Bus Controller Modules; 2005 remote I/O master
Electrically isolated RS485 interface
For connecting to remote I/O bus |
|
| 3EX250.60-1 |
System 2005 - Bus Controller Modules; 2005 Remote I/O slave controller
Electrically isolated RS485 interface
For connecting to remote I/O bus
Insert for power supply modules |
|
| 3EX282.6 |
System 2005 - Communication Modules; 2005 ETHERNET Powerlink bus controller,
2 ETHERNET Powerlink interfaces,
electrically isolated,
insert for power supply modules |
|
| 3EX350.6 |
System 2005 - Bus Controller Modules; 2005 local I/O master controller
Controls I/O modules on
up to 4 expansion racks
Insert for power supply modules |
|
| 3EX450.66-1 |
System 2005 - Communication Modules; 2005 bus controller Profibus DP master,
electrically isolated RS485 interface,
max. 12 MBaud, max. 3,5 kByte input data
and max. 3.5 kBytes output data,
RS232 configuration interface |
|
| 3IF050.6 |
System 2005 - Communication Modules; 2005 interface module
1 RS232 interface
1 RS485/RS422, network-capable
1 RS232/TTY interface
All interfaces are electrically isolated |
|
| 3IF060.6 |
System 2005 - Communication Modules; 2005 interface module
1 insert slot for insertable interface
modules |
|
| 3IF152.60-2 |
System 2005 - CPU Systems; 2005 programmable interface processor
118 KB SRAM, 512 KB FlashPROM
1 RS232 interface
1 CAN interface
CAN: elec. isolated, network-capable |
|
| 3IF260.60-1 |
System 2005 - CPU Systems; 2005 CPU or programmable interface
processor, 850 KB SRAM, 1.5 MB FlashPROM
1 insert slot for insertable interface
modules |
|
| 3IF613.9 |
System 2005 - Communication Modules; 2005 interface module
3 RS232 interfaces
Insert for CPU and IF modules |
|
| 3IF621.9 |
System 2005 - Communication Modules; 2005 interface module
1 RS485/RS422 interface
1 CAN interface
Both are isolated and network-capable
Insert for CPU and IF modules |
|
| 3IF622.9 |
System 2005 - Communication Modules; 2005 interface module
1 RS232 interface
2 RS485/RS422 interface
electrically isolated, network-capable
Insert for CPU and IF modules |
|
| 3IF661.9 |
System 2005 - Communication Modules; 2005 interface module
1 RS485 interface
Electrically isolated, network-capable
Transfer protocol: PROFIBUS DP
Insert for CPU and IF modules |
|
| 3IF671.9 |
System 2005 - Communication Modules; 2005 interface module
1 RS232 interface
1 RS485/RS422 interface
electrically isolated, network-capable
1 CAN interface
electrically isolated, network-capable
Insert for CPU and IF modules |
|
| 3IF672.9 |
System 2005 - Communication Modules; 2005 interface module
1 RS232 interface
2 CAN interfaces
CAN: elec. isolated, network-capable
Insert for CPU and IF modules |
|
| 3IF681.86 |
System 2005 - Interface Modules; 2005 interface module
1 RS232 interface
1 ETHERNET interface, with female
10BASE-T Twisted Pair RJ45 connector |
|
| 3IF681.96 |
2005 Interface; 1 RS232, 1 ETHERNET |
|
| 3IF686.9 |
System 2005 - Communication Modules; 2005 Interface module,
1 ETHERNET Powerlink interface,
manager or controller function,
electrically isolated |
|
| 3IF722.9 |
System 2005 - Communication Modules; aPCI interface module,
1 CAN interface, max. 500 kbps,
Objectbuffer in send and receive
direction, network-capable,
electrically isolated,
1 RS285/RS422 interface,
1 RS485 interface on terminal block,
order terminal bl |
|
| 3IF761.9 |
System 2005 - Communication Modules; aPCI interface module,
1 PROFIBUS DP interface
Electrically isolated, network-capable,
1 RS232 interface |
|
| 3IF762.9 |
System 2005 - Communication Modules; aPCI interface module,
1 PROFIBUS DP interface
Electrically isolated, network-capable,
1 RS422/RS485 interface,
Electrically isolated, network-capable |
|
| 3IF771.9 |
System 2005 - Communication Modules; aPCI interface module,
1 CAN interface, max. 500 kbps,
CAN: elec. isolated, network-capable
Objectbuffer in send and receive
direction,
order terminal block 1 x TB704
separately! |
|
| 3IF772.9 |
System 2005 - Communication Modules; aPCI interface module,
1 RS232 interface,
2 CAN interfaces, max. 500 kbps,
CAN: elec. isolated, network-capable
Objectbuffer in send and receive
direction,
order terminal blocks 2 x 0TB704.9
separately! |
|
| 3IF779.9 |
System 2005 - Communication Modules; aPCI interface module,
1 X2X Link master interface,
electrically isolated,
1 CAN interface, max. 500 kbps,
Objectbuffer in send and receive
direction, network-capable,
electrically isolated,
1 RS285/RS422 interface,
or |
|
| 3IF782.9 |
System 2005 - Communication Modules; aPCI interface module,
1 ETHERNET Powerlink interface,
manager or controller function,
1 RS485 interface to terminal block |
|
| 3IF786.9 |
System 2005 - Communication Modules; aPCI interface module,
1 ETHERNET Powerlink interface,
manager or controller function,
1 RS232 interface |
|
| 3IF787.9 |
System 2005 - Communication Modules; aPCI interface module,
1 ETHERNET Powerlink interface,
manager or controller function,
1 CAN interface, max. 500 kbps,
Objectbuffer in send and receive
direction, network-capable,
electrically isolated,
order terminal |
|
| 3IF787.9-1 |
System 2005 - Communication Modules; aPCI interface module, 1 POWERLINK V1/V2 interface, managing or controlled node, 1 CAN interface, max. 500 kbit/s, object buffers in send and receive direction, network-capable, electrically isolated, order 1x TB704 te |
|
| 3IF791.9 |
System 2005 - Communication Modules; aPCI interface module,
1 X2X Link master interface,
electrically isolated,
order terminal block 1 x TB704
separately! |
|
| 3IF797.9 |
System 2005 - Communication Modules; aPCI interface module,
1 X2X Link master interface,
electrically isolated,
1 CAN interface, max. 500 kbps,
Objectbuffer in send and receive
direction, network-capable,
electrically isolated,
1 RS232 interface,
order te |
|
| 3IF797.9-1 |
System 2005 - Communication Modules; |
|
| 3IP161.60-1 |
System 2005 - CPU Systems; 2005 programmable I/O processor
850 KB SRAM, 1.5 MB FlashPROM
1 RS232 interface
1 CAN interface
CAN: elec. isolated, network-capable
Max. 12 dig. inputs 24 VDC, sink
Max. 12 dig. outputs 24 VDC, 0,1 A
6 analog inputs +/- 10 V, 1 |
|
| 3ME950.90-1 |
2005 MEMORY,PLC-SW(128),; PLC, 256kEPROM,64kRAM, |
|
| 3ME963.90-1 |
System 2005 - Memory Modules; 2005 application memory
512 KB SRAM, 1 MB FlashPROM
With PCC operating system |
|
| 3NC150.6 |
System 2005 - Counter and Positioning Modules; 2005 Counter Module
2 inputs for incremental encoder, 32 bit
Input frequency 100 kHz
Encoder supply 5 to 30 VDC
2 analog outputs +/- 10 V, 12 bit
8 pin terminal block is included in delivery! |
|
| 3NC154.60-2 |
System 2005 - Counter and Positioning Modules; 2005 Positioning Module
3 axes, each axis has the following data
Input for incremental Encoder 5 V
Input frequency 150 kHz
Input for SSI absolute encoder
Analog output +/- 10 V, 12 Bit
Encoder supply 5 VDC or |
|
| 3NC157.60-1 |
System 2005 - Counter and Positioning Modules; 2005 Positioning Module
CAN Bus interface for controlling
up to 8 axes
2 trigger inputs 24 VDC, sink
4 pin terminal block included! |
|
| 3NW150.60-1 |
System 2005 - Communication Modules; 2005 PROFIBUS network module
Electrically isolated RS485 interface
For connecting to PROFIBUS networks |
|
| 3PS465.9 |
System 2005 - Power Supply Modules; 2005 power supply module
24 VDC, 50 W
With expansion slot |
|
| 3PS476:90-1 |
System 2005 - Power Supply Modules; 2005 B&R Stromversorgung 24VDC 50W R-I/O |
|
| 3PS477.9 |
System 2005 - Power Supply Modules; 2005 power supply module
24 VDC, 50 W
With expansion slave |
|
| 3PS794.9 |
System 2005 - Power Supply Modules; 2005 power supply module
230 VAC, 45 W
With expansion slot
Limited Power Fail Time (CP340) |
|
| 3TB162.9 |
System 2005 - Accessories; 2005 terminal block, 12 pin
Screw clamp |
|
| 3TB170.9 |
System 2005 - Accessories; 2005 terminal block, 20 pin
Screw clamp |
|
| 3TB170.91 |
System 2005 - Accessories; 2005 terminal block, 20 pin
Cage clamp |
|
| 3UM161.6 |
System 2005 - Miscellaneous Modules; 2005 Universal mixed module,
1x4 Analog inputs +/- 10 V, 14 Bit,
1x3 Analog outputs +/- 10 V, 12 Bit,
1x14 Digital inputs 24 VDC, 1 ms,
1 Digital output 24 VDC, 2 A, 500 µs,
1 Digital output 24 VDC, 10 mA, 10 µs,
both |
|
| 3XP152.60-1 |
System 2005 - CPU Systems; 2005 CPU
118 KB SRAM, 256 KB FlashPROM
1 RS232 interface
1 CAN interface
CAN: elec. isolated, network-capable
Insert for power supply modules |
|
| 3XP152.60-2 |
System 2005 - CPU Systems; 2005 CPU
118 KB SRAM, 512 KB FlashPROM
1 RS232 interface
1 CAN interface
CAN: elec. isolated, network-capable
Insert for power supply modules |
|
| 40107017 |
; Conector PL2S |
|
| 40801134 |
Transformatore T104 (CM76); Transformatore T104 |
|
| 43021029 |
Remplacement; 2005 Plastic Module LOGO |
|
| 43024004 |
Remplacement; 2005 Plastic box left side |
|
| 43024005 |
Remplacement; 2005 Plastic box right side 1 wide slot |
|
| 43024006 |
Remplacement; 2005 Plastic box right side 2 wide slot |
|
| 43024007 |
Remplacement; 2005 Plastic cover for DI450 DO479 |
|
| 43024016 |
Remplacement; 2005 Plastic cover for NC150 |
|
| 43024028 |
Remplacement; 2005 Plastic cover for PS465 PS475 |
|
| 430240310 |
Remplacement; CP260 Plastic Mask |
|
| 43024033 |
Remplacement; 2005 Plastic guide for IF modules |
|
| 43024080 |
Remplacement; 2005 Plastic cover for CP152 CP153 |
|
| 43024090 |
Remplacement; 2005 Plastic cover for PS477 |
|
| 43025046 |
; Bottom part for 4B1500.00-090 |
|
| 43924025 |
Remplacement; NC154 Plasic Mask |
|
| 4A0034.00-000 |
Power Panel - PP21/41; Panel A4 slide in legends
for PP41 (4P3040.00-490); 5 sheets
(for 10 devices), with CorelDraw file. |
|
| 4B1200.00-590 |
Panelware - Display Modules; PANELWARE compact HMI, black
Intelligent HMI, 32 KB EEPROM
LC display, 2 x 20 characters
background lighting
8 keys with LED, 1 RS232 interface
IP54 protection (from front) |
|
| 4B1250.00-490 |
Panelware - Compact Panels; PANELWARE compact HMI, white
Intelligent HMI, 32 KB EEPROM
LC display, 4 x 20 characters
background lighting
12 numerical keys + 12 function keys
1 RS232 interface
IP65 front protection |
|
| 4B1270.00-390 |
Panelware - Compact Panels; PANELWARE compact HMI
Terminal HMI (escape sequences)
LC display, 4 x 20 characters
background lighting
20 function keys
CAN interface, 24 VDC supply voltage
IP65 protection (from front) |
|
| 4B1270.00-490 |
Panelware - Compact Panels; PANELWARE compact HMI, white
Terminal HMI (escape sequences)
LC display, 4 x 20 characters
background lighting
12 numerical keys + 12 function keys
CAN interface, 24 VDC supply voltage
IP65 protection (from front) |
|
| 4B1500.00-090 |
Panelware - Compact Panels; PANELWARE micro HMI, blue
Intelligent HMI, 256 KB SRAM
256 KB FlashPROM, LC display
2 x 20 characters, background lighting
12 numerical keys + 16 keys with LED
2 RS232 interfaces
1 electrically isolated RS485/RS422
IP54 protect |
|
| 4C1300.01-510 |
Panelware - Controller Modules; PANELWARE panel controller C130
Color: black
VT100 terminal emulation
24 VDC supply
1 electrically isolated CAN interface |
|
| 4C1300.02-510 |
Panelware - Controller Modules; PANELWARE panel controller C130
Color: black
VT100 terminal emulation
24 VDC supply
1 electrically isolated CAN interface |
|
| 4C2000.01-110 |
Panelware - Controller Modules; PANELWARE panel controller C200
Color: blue
Intelligent panel controller
256 KB SRAM, 256 KB FlashPROM
24 VDC supply, real time clock
2 RS232 interfaces
1 electrically isolated RS485/RS422 |
|
| 4C2200.01-110 |
Panelware - Controller Modules; PANELWARE panel controller C220
Color: blue
Intelligent panel controller
256 KB SRAM, 256 KB FlashPROM
24 VDC supply, real time clock
2 RS232 interfaces
1 electrically isolated RS485/RS422
1 electrically isolated CAN interf |
|
| 4C2210.01-510 |
Panelware - Controller Modules; PANELWARE panel controller C221
Color: black
Intelligent panel controller
1 MB SRAM, 512 KB FlashPROM
24 VDC supply, real time clock
2 RS232 interfaces
1 electrically isolated RS485/RS422
1 electrically isolated CAN interfa |
|
| 4C3000.01-110 |
Panelware - Controller Modules; PANELWARE panel controller C300
Color: blue
Intelligent panel controller
256 KB SRAM, 256 KB FlashPROM
24 VDC supply, real time clock
1 RS232 interface
1 RS232/TTY interface
1 electrically isolated RS485/RS422
1 electricall |
|
| 4D1022.00-090 |
Panelware - Display Modules; PANELWARE display module, blue
LC display, 2 x 20 characters
Character height: 5.0 mm
Black on yellow, background lighting |
|
| 4D1042.00-090 |
Panelware - Display Modules; PANELWARE display module, blue
LC display, 4 x 20 characters
Character height: 8.0 mm
Black on yellow, background lighting |
|
| 4D1044.00-090 |
Panelware - Display Modules; PANELWARE display module, blue
LC display, 4 x 40 characters
Character height: 4.3 mm
Black on yellow, background lighting |
|
| 4D1084.00-090 |
Panelware - Display Modules; PANELWARE graphic display module, blue
LC display, graphics capable
8 x 40 characters or 64 x 240 pixels
Character height: 4.0 mm
Black on white, background lighting |
|
| 4D1084.00-590 |
Panelware - Display Modules; PANELWARE graphic display module, black
LC display, graphics capable
8 x 40 characters or 64 x 240 pixels
Character height: 4.0 mm
Black on white, background lighting |
|
| 4D1164.00-090 |
Panelware - Display Modules; PANELWARE graphic display module, blue
LC display, graphics capable
16 x 40 characters or 128 x 240 pixels
Character height: 4.0 mm
Black on white, background lighting
6 keys with LED |
|
| 4D1165.00-590 |
Panelware - Display Modules; PANELWARE graphic display panel, black
LC display, graphics capable
16 x 40 characters or 128 x 240 pixels
Character height: 4.0 mm
Black on white, background lighting
IP65 aluminum front, horizontal
47 keys, 30 of which have |
|
| 4D1166.00-490 |
Panelware - Display Modules; PANELWARE graphic display panel, white
LC display, graphics capable
16 x 40 characters or 128 x 240 pixels
Character height: 4.0 mm
Black on white, background lighting
IP65 aluminum front, vertical
47 keys, 30 of which have LE |
|
| 4D1167.00-490 |
Panelware - Display Modules; PANELWARE graphic display panel
with matrix touch
LC-Display, graphics capable
16 x 40 characters or 128 x 240 pixels
Character height: 4.0 mm
Black on white, background lighting
integrated matrix touch with 4 x 8 fields
IP65 |
|
| 4D2024.00-090 |
Panelware - Display Modules; PANELWARE display module, blue
VF display, 2 x 40 characters
Character height: 5.0 mm, green |
|
| 4D2024.00-590 |
Panelware - Display Modules; PANELWARE display module, black
VF display, 2 x 40 characters
Character height: 5.0 mm, green |
|
| 4E0010.01-090 |
KEY PAD, 16 KEYS,; BLUE |
|
| 4E0011.01-090 |
Panelware - Keypad Modules; PANELWARE keypad module, blue
16 keys with LED |
|
| 4E0011.01-590 |
Panelware - Keypad Modules; PANELWARE keypad module, black
16 keys with LED |
|
| 4E0021.01-090 |
Panelware - Keypad Modules; PANELWARE keypad module, blue
12 keys are labeled as a number block
4 keys with LED |
|
| 4E0021.01-590 |
Panelware - Keypad Modules; PANELWARE keypad module, black
12 keys are labeled as a number block
4 keys with LED |
|
| 4E0050.01-090 |
Panelware - Keypad Modules; PANELWARE special keypad module, blue
Dummy module |
|
| 4E0060.01-090 |
Panelware - Keypad Modules; PANELWARE special keypad module, blue
E-Stop button |
|
| 4E0080.01-590 |
Panelware - Keypad Modules; PANELWARE special keypad module, black
2 buttons, labeled START and STOP
1 field for company logo |
|
| 4EX101.00 |
Power Panel - Accessories; Power Panel expansion for PP41
1 insert slot for insertable
interface modules |
|
| 4IF370.7 |
Power Panel - Accessories; Power Panel interface module
1 CAN interface
Electrically isolated, network-capable
Screw-in module |
|
| 4MP181.0843-03 |
Mobile Panel - MP/L 1xx; Mobile Panel MP181 Operating Unit
8.4'' VGA color TFT display with touch
screen (resistive); 19 system keys;
key operated push button and E-stop.
64 MB SDRAM; Compact Flash slot
(type I); ETH 10/100; USB 1.1;
24 V DC. Handle and c |
|
| 4MP281.0571-12 |
Mobile Panel - MP/L 2xx; Mobile Panel MP281 Operating Unit
5.7'' QVGA color LC-display with touch
screen (resistive);
14 softkeys and 19 system keys;
key operated push button and E-stop.
64 MB SDRAM; 256 kB SRAM; Compact Flash
slot (type I); ETH 10/100; C |
|
| 4MPBRA.0000-00 |
Mobile Panel - Accessories B&R; Mobile Panel Wall Bracket |
|
| 4MPHDL.0000-00 |
Mobile Panel - Handgriff; Mobile Panel Handle
With integrated 3-step enabling switch. |
|
| 4P0420.00-490 |
Power Panel - PP21/41; Power Panel PP21
LC display, 4 x 20 characters,
background lighting, 34 function keys,
system compatible 2003 CPU,
700 kB SRAM, 1,4 MB FlashPROM,
1 PCMCIA slot,
1 RS232 interface,
1 CAN interface:
electrically isolated, network-capa |
|
| 4P3040.00-490 |
Power panel PP41; 5,7" QVGA black/white LC-Display, 8 softkeys and 32 function keys, system compatible 2003 CPU 700 Kbytes SRAM, 1,4 MB Flash prom, 1 PCMCIA slot, 1 RS232 interface, 1 CAN interface: electrically isolated, network- capable, 6 slots for scr |
|
| 4P3040.00-K19 |
Power panel PP41; 5,7" QVGA black/white LC-Display, touch screen, 8 softkeys and 32 function keys, system compatible 2003 CPU 700 Kbytes SRAM, 1,4 MB Flash prom, 1 PCMCIA slot, 1 RS232 interface, 1 CAN interface: electrically isolated, network- capable, 6 |
|
| 4P3040.01-490 |
Power Panel - PP21/41; Power Panel PP41
5.7 inch QVGA black/white LC-Display,
8 softkeys and 32 function keys,
system compatible 2003 CPU,
700 kB SRAM, 1,4 MB FlashPROM,
1 PCMCIA slot,
1 RS232 interface,
1 CAN interface: electrically isolated,
network-cap |
|
| 4PP015.0420-01 |
Power Panel - ; Power Panel, 24 VDC, 153 x 120 mm,
LC Display, 4x20 characters,
background lighting, 16 keys,
300 kB SRAM, 1024 kB FlashPROM, 1 RS232,
1 CAN interface, network capable
16 x DI, 24 VDC, sink / source,
2 Event counter,or 1 Inc. encoder, or
1 |
|
| 4PP015.E420-01 |
Power Panel - ; Power Panel, 24 VDC, 153 x 120 mm,
LC Display, 4x20 characters,
background lighting, 26 keys,
300 kB SRAM, 1024 kB FlashPROM, 1 RS232,
1 CAN interface, network capable
16 x DI, 24 VDC, sink / source,
2 Event counter,or 1 Inc. encoder, or
1 |
|
| 4PP015.E420-101 |
Power Panel - ; Power Panel, 24 VDC, 153 x 120 mm,
LC Display, 4x20 characters,
background lighting, 26 keys,
300 kB SRAM, 1,6 MB FlashPROM, 1 RS232,
1 CAN interface, network capable
16 x DI, 24 VDC, sink / source,
2 Event counter,or 1 Inc. encoder, or
1 |
|
| 4PP035.0300-01 |
Power Panel - ; Power Panel, 24 VDC, 153 x 120 mm,
LC Display, 160x80 pixel, 3 inch,
background lighting, 16 keys,
300 kB SRAM, 1024 kB FlashPROM, 1 RS232,
1 CAN interface, network capable
16 x DI, 24 VDC, sink / source,
2 Event counter,or 1 Inc. encoder, |
|
| 4PP035.1020-K01 |
Power Panel - ; Power Panel, 24 VDC, 153 x 120 mm,
LC Display, 160x80 pixel, 3 inch,
background lighting, 16 keys,
300 kB SRAM, 1024 kB FlashPROM, 1 RS232,
1 CAN interface, network capable
16 x DI, 24 VDC, sink / source,
2 Event counter,or 1 Inc. encoder, |
|
| 4PP045.0571-062 |
Power Panel - ; Power Panel PP45 5.7'' QVGA color LCD-display with touch screen; 8 function keys; add-on slot; Compact Flash slot; 32 MB DRAM; 32 kB SRAM; Ethernet 10/100; X2X Link; USB; IP 65 protection (front side); supply voltage 24 VDC. |
|
| 4PP045.IF23-1 |
Power Panel - ; PP45 Interface module CAN - RS232/RS422. |
|
| 4PP045.IF33-1 |
Power Panel - ; PP45 Interface module 2 x CAN |
|
| 4PP065.0571-P74 |
Power Panel - ; Power Panel PP65, 5.7" QVGA color TFT display with touch screen (resistive), 128 MB DRAM, 256 KB SRAM, CompactFlash slot, ETH 10/100, POWERLINK, 2x USB, IP65 protection (front side), order program memory separately. Order TB103 and TB704 t |
|
| 4PP065.0571-P74F |
Power Panel - ; Power Panel PP65, 5.7" QVGA color TFT display with touch screen (resistive), 10 function keys 128 MB DRAM, 232 KB SRAM, CompactFlash slot, ETH 10/100, POWERLINK, 2x USB, IP65 protection (front side), order program memory separately. Order |
|
| 4PP065.0571-X74 |
Power Panel - ; Power Panel PP65, 5.7" QVGA color TFT display with touch screen (resistive), 128 MB DRAM, 256 KB SRAM, CompactFlash slot, ETH 10/100, X2X, 2x USB, IP65 protection (front side), order program memory separately. Order TB103 and TB704 termina |
|
| 4PP065.IF23-1 |
Power Panel - ; PP65 Interface module CAN - RS232/RS422. |
|
| 4PP065.IF33-1 |
Power Panel - ; PP65 Interface module 2 x CAN |
|
| 4PP120.0571-01 |
Power Panel - PP100; Power Panel PP120
5.7'' QVGA b/w LC-display with touch
screen (resistive);
64 MB SDRAM; Compact Flash slot
(type I); ETH 10/100; RS 232; 2xUSB;
metal housing, IP 65 protection (front
side); 24 VDC (screw clamp 0TB103.9
or cage clamp 0 |
|
| 4PP120.0571-21 |
Power Panel - PP100; Power Panel PP120
5.7'' QVGA color LC-display with touch
screen (resistive);
64 MB SDRAM; Compact Flash slot
(type I); ETH 10/100; RS 232; 2xUSB;
metal housing, IP 65 protection (front
side); 24 VDC (screw clamp 0TB103.9
or cage clamp |
|
| 4PP220.0571-45 |
Power Panel - ; Power Panel PP220
5.7'' QVGA b/w LC-display with touch
screen (resistive);
1 aPCI slot; 64 MB SDRAM; 256 kB SRAM;
Compact Flash slot (type I); ETH 10/100;
RS 232; 2xUSB; battery; metal housing,
IP 65 protection (front side); 24 VDC
(screw |
|
| 4PP220.0571-65 |
Power Panel - ; Power Panel PP220
5.7'' QVGA color LC-display with touch
screen (resistive);
1 aPCI slot; 64 MB SDRAM; 256 kB SRAM;
Compact Flash slot (type I); ETH 10/100;
RS 232; 2xUSB; battery; metal housing,
IP 65 protection (front side); 24 VDC
(scre |
|
| 4PP220.0571-C05 |
Power panel PP220 Compact; 5,7" QVGA b/w LC-Display with Touch Screen (resistive), Compact Flash slot (type I); 64Mb SDRAM; 256Kb SRAM; ETH 10/100, RS232, 2xUSB, 1 CAN interface (3IF771.9 aPCI module); battery; metal housing, protection IP65 (from front); |
|
| 4PP220.0571-C45 |
Power panel PP220 Compact; 5,7" QVGA b/w LC-Display with Touch Screen (resistive), Compact Flash slot (type I); 64Mb SDRAM; 256Kb SRAM; ETH 10/100, RS232, 2xUSB, 1 X2X interface (3IF791.9 aPCI module); battery; metal housing, protection IP65 (from front); |
|
| 4PP220.1043-75 |
Power Panel - ; Power Panel PP220
10.4'' VGA color TFT display with touch
screen (resistive);
1 aPCI slot; 64 MB SDRAM; 256 kB SRAM;
Compact Flash slot (type I); ETH 10/100;
RS 232; 2xUSB; battery; metal housing,
IP 65 protection (front side); 24 VDC
(scr |
|
| 4PP220.1043-B5 |
Power Panel - ; Power Panel PP220
10.4'' VGA color TFT display with touch
screen (resistive);
2 aPCI slots; 64 MB SDRAM; 256 kB SRAM;
Compact Flash slot (type I); ETH 10/100;
RS 232; 2xUSB; battery; metal housing,
IP 65 protection (front side); 24 VDC
(sc |
|
| 4PP220.1505-75 |
Power Panel - ; Power Panel PP220
15'' XGA color TFT display with touch
screen (resistive);
1 aPCI slot; 64 MB SDRAM; 256 kB SRAM;
Compact Flash slot (type I); ETH 10/100;
RS 232; 2xUSB; battery; metal housing,
IP 65 protection (front side); 24 VDC
(screw |
|
| 4PP250.0571-K01 |
Power Panel - ; Power Panel PP250
5.7'' QVGA color LC-display;
6 softkeys; 16 function keys and 20
system keys;
1 aPCI slot; 64 MB SDRAM; 256 kB SRAM;
Compact Flash slot (type I); ETH 10/100;
RS 232; 2xUSB; battery; metal housing,
IP 65 protection (front |
|
| 4PP251.0571-65 |
Power Panel - ; Power Panel PP251
5.7'' QVGA color LC-display;
6 softkeys; 16 function keys and 20
system keys;
1 aPCI slot; 64 MB SDRAM; 256 kB SRAM;
Compact Flash slot (type I); ETH 10/100;
RS 232; 2xUSB; battery; metal housing,
IP 65 protection (front |
|
| 4PP251.1043-75 |
Power Panel - ; Power Panel PP251
10.4'' VGA color TFT display;
10 softkeys; 28 function keys and 20
system keys;
1 aPCI slot; 64 MB SDRAM; 256 kB SRAM;
Compact Flash slot (type I); ETH 10/100;
RS 232; 2xUSB; battery; metal housing,
IP 65 protection (fron |
|
| 4PP251:0571-C25 |
Power Panel - ; Set Power Panel PP251 compact CAN
5.7'' QVGA LCD color; 64 MB SDRAM;
256 kB SRAM; ETH 10/100. |
|
| 4PP280.1043-B5 |
Power Panel - ; Power Panel PP280
10.4'' VGA color TFT display with touch
screen (resistive);
10 softkeys and 12 function keys;
2 aPCI slots; 64 MB SDRAM; 256 kB SRAM;
Compact Flash slot (type I); ETH 10/100;
RS 232; 2xUSB; battery; metal housing,
IP 65 p |
|
| 4PP281.1043-B5 |
Power Panel - ; Power Panel PP281
10.4'' VGA color TFT display with touch
screen (resistive);
10 softkeys; 28 function keys and 20
system keys;
2 aPCI slots; 64 MB SDRAM; 256 kB SRAM;
Compact Flash slot (type I); ETH 10/100;
RS 232; 2xUSB; battery; metal |
|
| 4PP420.0571-45 |
Power Panel - ; Power Panel PP420 5.7'' QVGA b/w LC-display with touch screen (resistive); 1 aPCI slot; 64 MB SDRAM; 512 kB SRAM;Compact Flash slot (type I); ETH 10/100; RS 232; 2xUSB; battery; metal housing, IP 65 protection (front side); 24 VDC (screw c |
|
| 4PP420.0571-65 |
Power Panel - ; Power Panel PP420 5.7'' QVGA color LC-display with touch screen (resistive); 1 aPCI slot; 64 MB SDRAM; 512 kB SRAM;Compact Flash slot (type I); ETH 10/100; RS 232; 2xUSB; battery; metal housing, IP 65 protection (front side); 24 VDC (screw |
|
| 4PP420.0571-75 |
Power Panel - ; Power Panel PP420 5.7'' QVGA color TFT display with touch screen (resistive); 1 aPCI slot; 128 MB SDRAM; 512 kB SRAM;Compact Flash slot (type I); ETH 10/100; RS 232; 2xUSB; battery; metal housing, IP 65 protection (front side); 24 VDC (scr |
|
| 4PP420.0571-B5 |
Power Panel - ; Power Panel PP420;5.7" QVGA color TFT display with touchscreen (resistive);2 aPCI slots; 128 MB SDRAM;512 KB SRAM;CompactFlash slot (type I);ETH 10/100; RS232; 2x USB;IP65 protection (front side); 24 VDC(0TB103.9 screw clamp or 0TB103.91ca |
|
| 4PP420.1043-75 |
Power Panel - ; Power Panel PP420 10.4'' VGA color TFT display with touch screen (resistive); 1 aPCI slot; 64 MB SDRAM; 512 kB SRAM; Compact Flash slot (type I); ETH 10/100; RS 232; 2xUSB; battery; metal housing, IP 65 protection (front side); 24 VDC (sc |
|
| 4PP420.1043-B5 |
Power Panel - ; Power Panel PP420;10.4" VGA color TFT display with touch, screen (resistive);2 aPCI slots; 128 MB SDRAM; 512 KB SRAM;CompactFlash slot (type I);
ETH 10/100; RS232; 2x USB;IP65 protection (front side); 24 VDC, (0TB103.9 screw clamp or 0TB1 |
|
| 4PP420.1043-K14 |
Power Panel - ; Power Panel PP420 10.4'' VGA color TFT display with touch screen (resistive); 1 aPCI slot; 64 MB SDRAM; 512 kB SRAM; Compact Flash slot (type I); ETH 10/100; RS 232; 2xUSB; battery; metal housing,Front side Stainless steel IP 66 protection |
|
| 4PP420.1043-K24 |
Power Panel - ; Power Panel PP420 10.4'' VGA color TFT display with touch screen (resistive); 2 aPCI slot; 64 MB SDRAM; 512 kB SRAM; Compact Flash slot (type I); ETH 10/100; RS 232; 2xUSB; battery; metal housing,Front side Stainless steel IP 66 protection |
|
| 4PP420.1505-75 |
Power Panel - ; Power Panel PP420 15'' VGA color TFT display with touch screen (resistive); 1 aPCI slot; 64 MB SDRAM; 512 kB SRAM; Compact Flash slot (type I); ETH 10/100; RS 232; 2xUSB; battery; metal housing, IP 65 protection (front side); 24 VDC (scre |
|
| 4PP420.1505-B5 |
Power Panel - ; Power Panel PP420 15'' VGA color TFT display with touch screen (resistive); 2 aPCI slot; 64 MB SDRAM; 512 kB SRAM; Compact Flash slot (type I); ETH 10/100; RS 232; 2xUSB; battery; metal housing, IP 65 protection (front side); 24 VDC (scre |
|
| 4PP450.1043-K05 |
Power Panel - ; Power Panel PP420 10.4'' VGA color TFT display with touch screen (resistive); 2 aPCI slot; 64 MB SDRAM; 512 kB SRAM; Compact Flash slot (type I); ETH 10/100; RS 232; 2xUSB; battery; metal housing,Front side Stainless steel IP 66 protection |
|
| 4PP452.0571-75 |
Power Panel; Power Panel PP452; 5.7" QVGA TFT color display; 20 function keys and 20 system keys; 1 aPCI slot; 128 MB SDRAM; 512 KB SRAM; CompactFlash slot (type I); ETH 10/100; RS232; 2x USB; IP65 protection (front side); 24 VDC (0TB103.9 screw clamp or |
|
| 4PPC70.0573-20B |
Power Panel - ; Power Panel C70, 5.7", analog resistive touch screen, Intel ATOM 333 MHz comp.,256 MB DDRAM, 32 kB FRAM, 2 GB flash drive onboard, 1 X2X Link interface, 1 POWERLINK interface, 1 Ethernet interface 10BASE-T/100BASE-TX, 2 USB 2.0 interfaces, |
|
| 53824073 |
Remplacement; CP260 cover door |
|
| 53924059 |
Remplacement; NC154 cover door |
|
| 53925051 |
; Upper component for 4B1500.00-090 |
|
| 5A1104.00-090 |
PROFIBUS ISA Card; |
|
| 5A2000.00 |
Komplettierung; NEU 99900018 |
|
| 5A2001.02 |
PROVIT General - Accessories; Transparent Door for External Floppy
Disk Drive 5A2001.01, 5A2001.05, with
lock, sealed with gasket.
IP 55 from front. |
|
| 5A2001.05 |
PROVIT General - Accessories; External 3.5 inch Floppy Disk Drive
front black |
|
| 5A2005.01 |
IPC 2001 ISA Adapter; |
|
| 5A2005.02 |
IPC 2001 2 ISA Adapter; |
|
| 5A5000.01 |
PROVIT 5000 - Accessories; ISA 16 Bit interface board
with 2 serial interfaces, Dallas
Hardware Security Key, CAN bus interface,
256 kB SRAM (battery buffered).
1 PC-Card Slot (Typ I, II and III);
to access a ATA card (PcCard or Compact
Flash) under Windo |
|
| 5A5001.08 |
Hard Disk 6 GB; fixed mounted |
|
| 5A5001.12 |
Provit 5000 Hard Disk; Hard Disk Fujitsu 20GB fixed mounting |
|
| 5A5001.15 |
PROVIT 5000 - Accessories; Hard Disk 30 GB fixed mounting
Remark: See Provit 5000 Manual for
proper use of the hard disk. |
|
| 5A5001.16 |
PROVIT 5000 - Accessories; Hard Disk 30 GB fix / Compact Flash Slot
Remark: See Provit 5000 Manual for
proper use of the hard disk. |
|
| 5A5001.17 |
PROVIT 5000 - Accessories; Hard Disk 30 GB. 24/7 hard disk with extended temperature range. Remark: See Provit 5000 Manual for
proper use of the hard disk. |
|
| 5A5002.02 |
PROVIT 5000 - Accessories; Dual Silicon Disk Adapter Compact Flash
with 2 Slots for operating Compact Flash
cards in IPC5000, IPC5600, IPC5000C,
IPC5600C |
|
| 5A5002.03 |
PROVIT 5000 - Accessories; Silicon Disk Adapter Compact Flash
with 1 Slot for operating Compact Flash
cards in IPC5000, IPC56000, IPC5000C,
IPC5600C |
|
| 5A5004.05 |
PROVIT 5000 - Accessories; Remote CD-ROM / Display Cable
Length 5 m; for Provit 5000/5600. |
|
| 5A5004.10 |
PROVIT 5000 - Accessories; Remote CD-ROM / Display Cable
Length 10 m; for Provit 5000/5600. |
|
| 5A5008.04 |
PROVIT 5000 - Accessories; Slot Cover
For 5C5000.01, 5C5000.02, 5C5000.21 and
5C5000.22.
Cutout for 2 Compact Flash Slots. |
|
| 5A5009.01 |
PROVIT 5000 - Accessories; Provit 5000 Controller CD-ROM
For bus units 5C5000.2x and 5C5000.3x |
|
| 5A5600.07 |
PROVIT 5000 - Accessories; Provit 5600 Controller FDD und CD-RW
For system units 5C5601.xx |
|
| 5A9000.41 |
Transpoder; Key 4102 read only green |
|
| 5A9000.46 |
Transpoder; Key 4102 read and write red |
|
| 5A9010.46 |
transponder; Key SLI RD/WR red Transponder key tag Housing color red, read / write, SLI, 1kBit, 13,56 MHz |
|
| 5AC600.CDXS-00 |
APC620/630/Panel PC - Accessories; CD-ROM Drive (slide-in)
For APC620 or Panel PC. |
|
| 5AC600.CFSI-00 |
APC620/630/Panel PC - Accessories; Compact Flash slot (add-on)
For installation in an APC620 or Panel PC. |
|
| 5AC600.DVDS-00 |
APC620/630/Panel PC - Accessories; DVD-ROM/CD-RW Drive (slide-in)
For APC620 or Panel PC. |
|
| 5AC600.HDDI-00 |
APC620/630/Panel PC - Accessories; 30 GB Hard Disk 24/7 (add-on)
For APC620 or Panel PC.
Remark: Please see manual for proper use
of the hard disk. |
|
| 5AC600.HDDI-05 |
APC620/630/Panel PC - Accessories; 40 GB Hard Disk (add-on)
With extended temperatur range;
for APC620 or Panel PC.
Remark: Please see manual for proper use
of the hard disk. |
|
| 5AC600.HDDS-02 |
APC620/630/Panel PC - Accessories; 40 GB Hard Disk 24/7 (slide-in)
For APC620 or Panel PC.
Remark: Please see manual for proper use
of the hard disk. |
|
| 5AC600.HS01-00 |
APC620/630/Panel PC - Accessories (B&R); APC620 Heat Sink for Intel 815E
For APC620 system units with Intel
815E CPU board. |
|
| 5AC600.HS01-01 |
APC620/630/Panel PC - Accessories (B&R); APC620 Heat Sink
for CPU boards with Celeron M 600 MHz,
Pentium M 1100 MHz, Pentium M 1400 MHz. |
|
| 5AC600.HS01-02 |
APC620/630/Panel PC - Accessories (B&R); APC620 Heat Sink for CPU Boards with Pentium M 1600 MHz, Pentium M 1800 MHz |
|
| 5AC600.UPSB-00 |
; Battery unit 5 Ah; for APC620, APC810 or PPC800 UPS |
|
| 5AC700.HS01-00 |
APC620/630/Panel PC - Accessories (B&R); Panel PC Heat Sink
for CPU boards with Celeron 3 400 MHz,
Celeron 3 733 MHz, Celeron 3 1000 MHz. |
|
| 5AC700.HS01-01 |
APC620/630/Panel PC - Accessories (B&R); Panel PC Heat Sink
for CPU boards with Celeron M 600 MHz,
Pentium M 1100 MHz, Pentium M 1400 GHz. |
|
| 5AC700.HS01-03 |
APC620/630/Panel PC - Accessories (B&R); Panel PC Heat Sink
for CPU boards wit Atom 1600 GHz. |
|
| 5AC901.BX02-00 |
APC910; APC910 2-slot bus,2 PCI |
|
| 5AC901.FF02-00 |
APC910; Front cover for 2-slot APC910 - Orange |
|
| 5AC901.HS01-00 |
APC910; APC910 heat sink, passive |
|
| 5ACINV.0003-00 |
Accesorios; Inverter as spare part for 5PC720.1505-01, 5PC720.1505-02,5PC781.1505-00 and customized versions |
|
| 5AP1120.1505-000 |
Automation Panel AP1000; Automation Panel 15.0" XGA TFT. 1024 x 768 pixels (4:3). Single-touch (analog resistive). Cabinet-mounted devices. Landscape format. Front USB interface. For PPC900/PPC2100/link modules. Installation compatible with 5PP520.1505-00 |
|
| 5AP920.1043-01 |
PROVIT General - ; Automation Panel AP920
10.4'' VGA color TFT display with touch
screen (resistive);
2 USB 2.0 interfaces;
slot for Automation Panel link;
IP 65 protection (from front).
24 V DC. |
|
| 5AP920.1043-K04 |
PROVIT General - ; Automation Panel AP920
10.4'' VGA color TFT display with touch
screen (resistive)Analog, resistive touch screen
(without dirt-collecting edges)• Hygienically-compatible design• Stainless steel front;
2 USB 2.0 interfaces;
slot for Auto |
|
| 5AP920.1505-01 |
PROVIT General - ; Automation Panel AP920
15'' XGA color TFT display with touch
screen (resistive);
3 USB 2.0 interfaces;
slot for Automation Panel link;
IP 65 protection (from front).
24 V DC. |
|
| 5AP920.1906-01 |
PROVIT General - ; Automation Panel AP920
19'' SXGA color TFT display with touch
screen (resistiv);
3 USB 2.0 interfaces;
slot for Automation Panel link;
IP 65 protection (from front).
24 V DC. |
|
| 5C2000.02 |
Controller 486SXLC2; DRAM; FPROM; SRAM |
|
| 5C2000.03 |
Controller 486SXLC2; DRAM; HDD |
|
| 5C2001.01 |
Controller 486DX2-66; FPROM; SRAM; CF; Processor 80486DX2-66 MHz, 8 MB DRAM, 256 kB SRAM, 2 MB FPROM, Compact Flash Slot (Type 1), 2 serial interfaces (16 Byte FIFO), 1 parallel interface, CAN bus interface (electrically isolated), Dallas Hardware Securit |
|
| 5C2001.02 |
Controller 486DX2-66; FP, SR |
|
| 5C2001.03 |
Controller 486DX2-133; HDD |
|
| 5C2001.07 |
Controller 486DX2-133; HDD, Arcnet, Ethernet |
|
| 5C2001.15 |
Controller 486DX2-66; CF; SRAM; Processor 80486DX2-66 MHz, 8 MB DRAM, 256 kB SRAM, Compact Flash (Type I), 4 serial interfaces (16 Byte FIFO, 2 electrically isolated), 1 parallel interface, CAN bus interface (electrically isolated), 2 PC-Card Slots (Type |
|
| 5C2001.21 |
Controller 486DX2-133; HDD, Ethernet |
|
| 5C2002.02 |
Controller 486DX5-133; FP, SR, Ethernet |
|
| 5C5000.01 |
Bus PS 100-240VAC; 2 Slots (1PCI;2ISA) |
|
| 5C5000.02 |
Bus PS 24VDC; 2 Slots (1PCI;2ISA) |
|
| 5C5000.21 |
PROVIT 5000 - Bus Unit; Provit 5000 Controller Bus Unit
2 slots (1 BR PCI/ISA, 1 half size
PCI). Prepared for add-on CD-ROM
drive. Supply voltage 100-240 VAC.
For system units 5C5001.xx. |
|
| 5C5000.22 |
PROVIT 5000 - Bus Unit; Provit 5000 Controller Bus Unit
2 slots (1 BR PCI/ISA, 1 half size PCI).
Prepared for add-on CD-ROM drive.
Supply voltage 24 VDC.
For system units 5C5001.xx. |
|
| 5C5000.31 |
PROVIT 5000 - Bus Unit; Provit 5000 Controller Bus Unit
5 slots (1 BR ISA, 1 half size ISA,
1 half size ISA/PCI, 2 half size PCI).
Supply voltage 100-240 VAC.
Prepared for an add-on CD-ROM drive.
For system units 5C5001.xx. |
|
| 5C5001.01 |
System 82430HX; VGA; MTC; 2 PS/2 SIMM |
|
| 5C5001.03 |
System 82430HX; VGA/2; MTC; 2 PS/2 SIM |
|
| 5C5001.11 |
System 82440BX for Intel Celeron/PentiumIII (Provit 5000); VGA/2; MTC; 2 PS/2 SIM |
|
| 5C5001.21 |
System 82440BX for Intel Celeron/PentiumIII (Provit 5000); VGA/2; MTC; 2 PS/2 SIM, connections for FPD, USB, remote ID drive, Ethernet 10/100 |
|
| 5C5001.32 |
PROVIT 5000 - System Unit; Provit 5000 Controller System Unit
For Intel Celeron and Pentium III
processors, ATI Rage Mobility M graphics
controller with 4 MB Video RAM,
Chipset Intel 82440 BX, 2 DIMM slots,
2 serial, 1 parallel interface.
Connections for |
|
| 5C5002.05 |
Prozessor iP 166; |
|
| 5C5002.12 |
Prozessor Intel Celeron 366/66; 32Kb L1 Cache, 128 L2 Cache |
|
| 5C5002.14 |
PROVIT 5000 - Processors; Intel Celeron Processor 566/66
For system units 5C5001.1x,
5C5601.1x, 5C5001.2x, 5C5601.2x,
5C5001.3x, 5C5601.3x and 5C5001.4x. |
|
| 5C5002.16 |
PROVIT 5000 - Processors; Intel Pentium III Processor 850/100
For system units 5C5001.1x,
5C5601.1x, 5C5001.2x, 5C5601.2x,
5C5001.3x, 5C5601.3x and 5C5001.4x. |
|
| 5C5600.01 |
Bus PS 115/230VAC; 4 Slots (3PCI;4ISA) |
|
| 5C5601.11 |
System 82440BX for Intel Celeron/PentiumIII (Provit 5600); VGA/2; MTC; 2 PS/2 SIM |
|
| 5C5601.12 |
System 82440BX for Intel Celeron/PentiumIII (Provit 5600); VGA/4; MTC; 2 PS/2 SIM |
|
| 5CAMPC.0020-01 |
Mobile Panel - Accessories; Mobile Panel Cabinet Cable 2 m
Ethernet straight through. |
|
| 5CAMPH.0100-00 |
Mobile Panel - Accessories; Mobile Panel Connecting Cable 10 m |
|
| 5CASDL.0018-00 |
PROVIT General - Accessories; SDL cable 1.8 m |
|
| 5CASDL.0050-00 |
PROVIT General - Accessories; SDL cable 5 m |
|
| 5CASDL.0200-00 |
PROVIT General - Accessories; SDL cable 20m, without extender |
|
| 5CASDL.0300-00 |
PROVIT General - Accessories; SDL cable 30m, without extender |
|
| 5CASDL.0300-13 |
PROVIT General - Accessories; SDL cable 30m, with extender |
|
| 5CFAST.032G-00 |
Compact Fast; CFast card SLC 32 GB |
|
| 5CFAST.064G-10 |
Compact Fast; CFast card MLC 64 GB |
|
| 5CFAST.2048-00 |
Compact Fast; CFast card SLC 2 GB |
|
| 5CFCRD.0032-01 |
Compact Flash; 32 Mbytes ATA/IDE |
|
| 5CFCRD.0032-02 |
Compact Flash; Compact Flash 32 MB ATA/IDE SanDisk |
|
| 5CFCRD.0064-01 |
Compact Flash; 64 Mbytes ATA/IDE |
|
| 5CFCRD.0064-02 |
Compact Flash; Compact Flash 64 MB ATA/IDE SanDisk |
|
| 5CFCRD.0064-03 |
Compact Flash; Compact Flash 64 MB Silicon |
|
| 5CFCRD.0128-03 |
Compact Flash; Compact Flash 128 MB Silicon |
|
| 5CFCRD.0256-03 |
Compact Flash; Compact Flash 256 MB Silicon |
|
| 5CFCRD.0384-01 |
Compact Flash; 384 Mbytes ATA/IDE |
|
| 5CFCRD.0512-02 |
Compact Flash; Compact Flash 512 MB ATA/IDE SanDisk |
|
| 5CFCRD.0512-03 |
Compact Flash; Compact Flash 512 MB Silicon |
|
| 5CFCRD.0512-06 |
Compact Flash; Compact Flash 512 MB B&R |
|
| 5CFCRD.1024-02 |
Compact Flash; Compact Flash 1 GB ATA/IDE SanDisk |
|
| 5CFCRD.1024-03 |
Compact Flash; Compact Flash 1024 MB Silicon |
|
| 5CFCRD.2048-03 |
Compact Flash; Compact Flash 2048 MB Silicon |
|
| 5CFCRD.4096-04 |
Compact Flash; Compact Flash 4096 MB Silicon |
|
| 5CFCRD.4096-06 |
Compact Flash; CompactFlash 4 GByte B&R |
|
| 5D2000.03 |
Panel Kit TFT C; VGA; 10.4 in |
|
| 5D2000.04 |
Panel Kit LCD B/W; VGA; 9.4 in |
|
| 5D2210.01 |
iPanel TFT C; VGA; 10.4 in; T |
|
| 5D2219.02 |
iPanel LCD C; QVGA; 5.7 in; T |
|
| 5D2300.01 |
Panel TFT C; VGA; 10.4 in; M |
|
| 5D2500.03 |
Panel LCD C; VGA; 9.4 in; F |
|
| 5D2500.16 |
Panel TFT C; VGA; 10.4 in; F |
|
| 5D2500.17 |
Panel TFT C; VGA; 10.4 in; F |
|
| 5D2519.02 |
iPanel LCD C; QVGA; 5.7 in; F |
|
| 5D5000.03 |
PROVIT 5000 - Displays and Panels; Provit 5000 Display Kit
10.4'' VGA color TFT display;
incl. cable, without housing. |
|
| 5D5001.03 |
PROVIT 5000 - Displays and Panels; Provit 5000 Display Kit
12.1 inch SVGA Color TFT-Display,
incl. touch screen and cable,
without housing. |
|
| 5D5201.11 |
PROVIT 5000 - Displays and Panels; Provit 5000 Display Unit
with VGA Color TFT-Display, 12 inch
diagonal and integrated touch screen
(resistive). Protection IP65 (from front).
Comes complete with accessories (cable).
Outline dimensions 310 x 236 mm (WxH) |
|
| 5D5210.01 |
PROVIT 5000 - Displays and Panels; Provit 5000 Display Unit
10.4'' VGA color TFT display with touch
screen (resistive);
IP 65 protection (front side). |
|
| 5D5211.03 |
PROVIT 5000 - Displays and Panels; Provit 5000 Display Unit
12.1'' SVGA color TFT display with touch
screen (resistive);
IP 65 protection (from front). |
|
| 5D5212.02 |
PROVIT 5000 - Displays and Panels; Provit 5000 Display Unit
15'' XGA color TFT display with touch
screen (resistiv);
IP 65 protection (from front). |
|
| 5D5213.01 |
Panel TFT C; SXGA; 18.1 in; T |
|
| 5D5510.10 |
PROVIT 5000 - Displays and Panels; Provit 5000 Display Unit
10.4'' VGA color TFT display;
23 function keys and 20 system keys;
IP 65 protection (from front). |
|
| 5D5600.01 |
PROVIT 5000 - Displays and Panels; Provit 5600 Display Unit
10.4'' VGA color TFT display;
52 function keys and 20 system keys;
PS/2 keyboard connector;
IP 65 protection (from front). |
|
| 5DLDVI.1000-01 |
PROVIT General - ; Automation Panel Link DVI Receiver
Connectors for DVI-D, RS232 and
USB 2.0 (type B); 24 VDC (screw clamp
0TB103.9 or cage clamp 0TB103.91
must be ordered separately).
|
|
| 5DLSDL.1000-00 |
PROVIT General - ; Automation Panel Link SDL Receiver
Connector for SDL in;
Transmission of display data, touch
screen, USB 1.1, matrix keys, service
data; 24 VDC (screw clamp 0TB103.9
or cage clamp 0TB103.91 must be
ordered separately). |
|
| 5DLSDL.1000-01 |
PROVIT General - ; Automation Panel Link SDL Transceiver
Connectors for SDL in and SDL out;
Transmission of display data, touch
screen, USB 1.1, matrix keys, service
data; 24 VDC (screw clamp 0TB103.9
or cage clamp 0TB103.91 must be
ordered separately). |
|
| 5DT525-10 |
DC Driver 10 Amps; |
|
| 5E9000.29 |
Transponder; Reader 22mm USB |
|
| 5E9010.29 |
Transponder; Transponder - Reader 13,56 Mhz 22mm USB |
|
| 5E9600.01-020 |
PROVIT General - Accessories; 19 Inch AT Keyboard
for front mount installation, IP 65
from front, US keyboard layout. |
|
| 5LS071.9 |
System 2000 Logic Scanner - Communication Modules; Logic scanner expansion card LS071
1 RS232 interface
1 CAN interface
CAN: elec. isolated, network-capable |
|
| 5LS172.4 |
System 2000 Logic Scanner - Bus Controller Modules; Logic Scanner 2x Can,
ISA half size module, max. 500 kBaud,
object-buffer in transmit and receive
direction, CAN: electrically isolated |
|
| 5LS172.6 |
System 2000 Logic Scanner - Communication Modules; Logic Scanner 2 x CAN,
PCI half size module, max. 500 kBaud,
object-buffer in transmit and receive
direction, 256 kByte SRAM (Automation
Runtime)
CAN: electrically isolated |
|
| 5LS187.6 |
System 2000 Logic Scanner - Communication Modules; Logic Scanner ETHERNET Powerlink,
PCI Half Size Modul,
1 ETHERNET Powerlink interface,
manager or controller function,
1 CAN interface, max. 500 kbps,
Objectbuffer in send and receive
direction, network-c |
|
| 5LS187.6-1 |
System 2000 Logic Scanner - Communication Modules; Logic Scanner ETHERNET Powerlink,
PCI Half Size Modul,
1 ETHERNET Powerlink interface,
manager or controller function,
1 CAN interface, max. 500 kbps,
Objectbuffer in send and receive
direction, network-c |
|
| 5LS189.6 |
System 2000 Logic Scanner - Communication Modules; Logic Scanner ETHERNET Powerlink,
PCI Half Size Modul,
1 ETHERNET Powerlink interface,
manager or controller function,
1 X2X Link Master interface,
electrically isolated,
1 MByte SRAM (Automation Runtime) |
|
| 5LS197.6 |
System 2000 Logic Scanner - Communication Modules; Logic Scanner X2X Link,
PCI Half Size Modul,
1 X2X Link master interface,
electrically isolated,
1 CAN interface, max. 500 kbps,
Objectbuffer in send and receive
direction, network-capable,
electrically i |
|
| 5LS251.60-1 |
System 2000 Logic Scanner - CPU Systems; Logic scanner CPU LS251
32 bit half size PCI card
2 MB DRAM, 1 MB SRAM, 512 KB FlashPROM
1 remote I/O master (RS485)
1 CAN interface
Both are isolated and network-capable |
|
| 5LS301.4 |
System 2000 Logic Scanner - Miscellaneous Modules; Logic Scanner ISA I/O Board
16 digital inputs, 24 VDC, Sink,
16 digital outputs, 24 VDC, 0,5 A,
4 inputs +/-10 V, +/-20 mA, 12 Bit,
2 outputs +/- 10 V, 12 Bit,
no electronic isolation,
Order terminal bloc |
|
| 5MMDDR.0256-00 |
PROVIT General - Accessories; SO-DIMM DDR RAM 256 MB PC2700 |
|
| 5MMDDR.0512-00 |
PROVIT General - Accessories; SO-DIMM DDR RAM 512 MB PC2700 |
|
| 5MMDDR.0512-01 |
SO-DIMM module 512 MB DDR RAM PC2700; |
|
| 5MMDDR.1024-00 |
PROVIT General - Accessories; SO-DIMM DDR RAM 1024 MB PC2700 |
|
| 5MMDDR.1024-01 |
SO-DIMM module 1024 MB DDR2 RAM PC2-5300; |
|
| 5MMDDR.2048-03 |
Automation PC 900; SO-DIMM DDR3, 2048 MB |
|
| 5MMSDR.0512-01 |
PROVIT General - Accessories; SO-DIMM SDRAM 512 MB PC133 |
|
| 5MMUSB.2048-00 |
PROVIT General - Accessories; USB 2.0 Memory Stick 2048 MB |
|
| 5P20:ULMA-01 |
IPC 2000 Set; With the followings components: 5C2002.02 + 5CFCRD.0032-01 + 1A4601.02 |
|
| 5P50:ULMA-01 |
B&R PROVIT5000; Customized variant ULMA-1 includig 5C5000.01, 5C5001.11, 5C5002.12, 9A004.12, 5A5001.10, 5S700.03-090 |
|
| 5P650IR |
UPS station; EATON 5P 650i VA en Rack 1U (SKU Y711607 |
|
| 5PC600.E815-03 |
APC620/630/Panel PC - ETX Modules; CPU Board Intel Celeron 3, 1000 MHz
133 MHZ FSB, 256 kB L2 cache;
Chipset 815E,
1 socket for SO-DIMM SDRAM module. |
|
| 5PC600.E855-00 |
APC620/630/Panel PC - ETX Modules; CPU Board Intel Pentium M, 1100 MHz
400 MHZ PSB, 1 MB L2 cache;
chipset 855GME;
1 socket for SO-DIMM DDR module. |
|
| 5PC600.E855-03 |
APC620/630/Panel PC - ETX Modules; CPU Board Intel Pentium M, 1800 MHz 400 MHZ PSB, 2 MB L2 cache; chipset 855GME; 1 Sockel for SO-DIMM DDR module. |
|
| 5PC600.E855-04 |
APC620/630/Panel PC - ETX Modules; CPU Board Intel Celeron M, 600 MHz
400 MHZ PSB, 512 kB L2 cache;
chipset 855GME;
1 socket for SO-DIMM DDR module. |
|
| 5PC600.E855-05 |
APC620/630/Panel PC - ETX Modules; CPU Board Intel Pentium M, 1000 MHz
400 MHZ PSB, 1 MB L2 cache;
chipset 855GME;
1 socket for SO-DIMM DDR module. |
|
| 5PC600.FA01-00 |
APC620/630/Panel PC - APC Basicsystem; APC620 Fan Kit
For system units with 1 PCI Slot. |
|
| 5PC600.FA02-00 |
APC620/630/Panel PC - APC Basicsystem; APC620 Fan Kit
For system units with 2 PCI slots. |
|
| 5PC600.SX01-00 |
APC620/630/Panel PC - APC Basicsystem; APC620 System Unit 1 PCI Slot
Connectors for 2 x RS232, 2 x USB 2.0,
Short Distance Link, 2 x ETH 10/100,
AC97 sound, PS/2 keyboard/mouse; 24 VDC
(screw clamp 0TB103.9 or cage clamp
0TB103.91 must be ordered separate |
|
| 5PC600.SX02-00 |
APC620/630/Panel PC - APC Basicsystem; APC620 System Unit 2 PCI Slots
1 slot für Automation Panel link
transmitter; 2 drive slots;
connectors for 2 x RS232, 2 x USB 2.0,
Short Distance Link, 2 x ETH 10/100,
AC97 sound, PS/2 keyboard/mouse; 24 VDC
(screw c |
|
| 5PC600.SX02-01 |
APC620/630/Panel PC - APC Basicsystem; APC620 System Unit 2 PCI Slots
1 drive slot;
connectors for 2 x RS232, 2 x USB 2.0,
Short Distance Link, 2 x ETH 10/100,
AC97 sound, PS/2 keyboard/mouse; 24 VDC
(screw clamp 0TB103.9 or cage clamp
0TB103.91 must be o |
|
| 5PC600.X945-00 |
APC620/630/Panel PC - ETX Modules; CPU Board Intel Atom, 1600 MHz 533 MHZ FSB, 512 KB L2 cache; chipset 945GME; 1 socket for SO-DIMM DDR2 RAM module. |
|
| 5PC700.FA02-01 |
APC620/630/Panel PC - APC Basicsystem; Panel PC fan kit
For Panel PC 15'' with 2 PCI slots. |
|
| 5PC720.1043-01 |
APC620/630/Panel PC - Panel PC Basicsystem; Panel PC 720 10.4'' VGA, 2 PCI slots
10.4'' VGA color TFT display with touch
screen (resistive); 1 disk drive slot;
connections for 2 x RS232, 3 x USB 2.0,
monitor, 2 x Ethernet 10/100, AC97
sound, PS/2 keyboard |
|
| 5PC720.1505-00 |
APC620/630/Panel PC - Panel PC Basicsystem; Panel PC 720 15'' XGA, 0 PCI slots
15'' XGA color TFT display with touch
screen (resistiv);
connections for 2 x RS232, 3 x USB 2.0,
monitor, 2 x Ethernet 10/100, AC97
sound, PS/2 keyboard/mouse; IP65
protection |
|
| 5PC720.1505-01 |
APC620/630/Panel PC - Panel PC Basicsystem; Panel PC 720 15'' XGA, 2 PCI slots
15'' XGA color TFT display with touch
screen (resistiv); 1 disk drive slot;
connections for 2 x RS232, 3 x USB 2.0,
monitor, 2 x Ethernet 10/100, AC97
sound, PS/2 keyboard/mous |
|
| 5PC720.1505-02 |
APC620/630/Panel PC - Panel PC Basicsystem; Panel PC 720 15'' XGA, 1 PCI slots
15'' XGA color TFT display with touch
screen (resistiv); 1 disk drive slot;
connections for 2 x RS232, 3 x USB 2.0,
monitor, 2 x Ethernet 10/100, AC97
sound, PS/2 keyboard/mous |
|
| 5PC900.TS77-07 |
APC910; CPU board Intel Celeron 847E 1.1 GHz,Dual core, HM76 chipset,2x DDR3 memory socket, For APC910 |
|
| 5PC910.SX02-00 |
APC910; 2-slot APC910 system unit,Insert for 1 slide-in compact drive and 1 slide-in drive,Insert for 2 interface options, CFast slot |
|
| 5PP120.1043-37 |
Power panel PP120 BIOS; 10,4" VGA color TFT-Display with Touch Screen (resistive), Compact Flash slot (type I), ETH 10/100, RS232, 2xUSB; 128Mb SDRAM; Battery; metal housing, protection IP65 (from front); 24Vdc. Order power connector separately (screw cla |
|
| 5PP120.1214-37A |
Power Panel - PP100; Power Panel PP120 BIOS
12.1'' SVGA color TFT display with touch
screen (resistive);
128MB SDRAM; Compact Flash slot
(type I); ETH 10/100; RS 232; 2xUSB;
battery; metal housing,
IP 65 protection (front side); 24 VDC
(screw clamp 0TB103 |
|
| 5PP320.0571-K05 |
Power Panel - ; Power Panel PP320 5.7'' QVGA color TFT display with touch screen (resistive); 256 MB SDRAM; 512 kB SRAM; Compact Flash slot (type I); ETH 10/100; RS 232; 2xUSB; battery; metal housing, IP 65 protection (front side); 24 VDC (screw clamp 0T |
|
| 5PPC2100.BY44-000 |
Panel PC 2100; Panel PC 2100. Intel Atom E3845 1.91 GHz. Quad core. 4 GB SDRAM. For Automation Panel 923/933 |
|
| 5S0100.14-020 |
Interact - Packages; ITR WinDEV System
Interact development system (DEV) for
MS-Windows®95/NT consists of APM, PTM,
GMM, AMM, DTM, RCM, HTM, RPM, UPM as
well as B&R device drivers and device
drivers for well-known PLC types.
Includes software (setup disks |
|
| 5S0500.02 |
Automation Net - PVI - Packages; PVI Security Key R/T Centronics |
|
| 5S0500.02U |
Automation Net - PVI - Packages; PVI Security Key R/T USB |
|
| 5S0700.03-090 |
GENESIS 32 Runtime License for Windows NT, incl. Development Graph.; Release 6.1 |
|
| 5SWWI7.1643-ENG |
; Microsoft Windows Embedded Standard 7 SP1 64 bits. English. For PPC2100. License |
|
| 5Y271000000000-001 |
APC910; 2-slot APC910 system unit:5PC910.SX02-00,APC910 2-slot bus, 2PCI: 5AC901.BX02-00; Front cover for 2-slot, orange 5AC901.FF02-00; APC910 heat sink, passive 5AC901.HS01-00; Connector 24 VDC,0TB103.9; CPU board Intel Celeron 847E 1.1 GHz 5PC900.TS77- |
|
| 7AC010.9 |
System 2003 - Accessories; 2003 bus cover, 5 pieces |
|
| 7AC020.9 |
System 2003 - Accessories; 2003 bus cover, 1 piece |
|
| 7AC0201.9 |
2003 Accessory; LATERAL MODULE COVER PLATE METALIC STRAIGHT |
|
| 7AC0201.91 |
2003 Accessory; LATERAL MODULE COVER PLATE PLASTIC STRAIGHT |
|
| 7AC911.9 |
System 2003 - Accessories; Bus connector, CAN |
|
| 7AF101.7 |
System 2003 - Analog Interface (AF) Modules; 2003 adapter module
4 slots for screw-in modules |
|
| 7AF104.7 |
System 2003 - Analog Interface (AF) Modules; 2003 adapter module high speed
4 slots for screw-in modules |
|
| 7AI261.7 |
System 2003 - Analog Input Modules; 2003 analog input module
1 input for evaluation of full-bridge
strain gauge data, 24 bit
Screw-in module |
|
| 7AI294.7 |
System 2003 - Analog Input Modules; 2003 analog input module
4 inputs, potentiometer evaluation
13 bit
Screw-in module |
|
| 7AI351.7 |
2003 Analog IN; 1x +/-10V (0 - 20mA) |
|
| 7AI351.70 |
System 2003 - Analog Input Modules; 2003 analog input module
1 input, +/- 10 V or 0 to 20 mA
12 bit + sign
Screw-in module
Order terminal block 1 x TB712
separately! |
|
| 7AI354.7 |
2003 Analog IN; 4x +/-10V |
|
| 7AI354.70 |
System 2003 - Analog Input Modules; 2003 analog input module
4 inputs, +/- 10 V, 12 bit + sign
Screw-in module
Order terminal block 1 x TB712
separately! |
|
| 7AI774.70 |
System 2003 - Analog Input Modules; 2003 analog input module
4 inputs, 0 to 20 mA, 12 bit
Screw-in module
Order terminal block 1 x TB712
separately! |
|
| 7AM351.70 |
System 2003 - Analog Mixed Modules; 2003 analog mix module
1 input, +/- 10 V, 16 bit
1 output, +/- 10 V, 16 bit
Screw-in module
Order terminal block 1 x TB712
separately! |
|
| 7AO352.70 |
System 2003 - Analog Output Modules; 2003 analog output module
2 outputs, +/- 10 V or 0-20 mA, 12 bit
Screw-in module
Order terminal block 1 x TB712
separately! |
|
| 7AT324.70 |
System 2003 - Temperature Input Modules; 2003 analog input module
4 temperature inputs (2-line connection)
KTY10 -50 to +150 degrees C
KTY84 -40 to +300 degrees C
PT100 -200 to +850 degrees C
PT1000 -200 to +850 degrees C
Screw-in module
Order terminal bl |
|
| 7AT351.7 |
System 2003 - Temperature Input Modules; 2003 analog input module
1 input, PT100 (3-line connection)
-200 to +850 degrees C
Screw-in module |
|
| 7AT352.7 |
2003 Analog IN; 2x PT100 3-wire |
|
| 7AT352.70 |
System 2003 - Temperature Input Modules; 2003 analog input module
2 inputs, PT100 (3-line connection)
-200 to +850 degrees C
Screw-in module
Order terminal block 1 x TB712
separately! |
|
| 7AT664.70 |
System 2003 - Temperature Input Modules; 2003 analog input module
4 inputs, thermocouple
-270 to +1768 degrees C
Screw-in module
Order terminal block 1 x TB712
separately! |
|
| 7AT664.70-1 |
System 2003 - Temperature Input Modules; 2003 analog input module
4 inputs, thermocouple
50 Hz noise suppression
-270 to +1768 degrees C
Screw-in module
Order terminal block TB712 separately! |
|
| 7BP701.1 |
System 2003 - Backplanes; 2003 module rack for 1 module
incl. right side section |
|
| 7BP702.0 |
System 2003 - Backplanes; 2003 module rack for 2 modules
incl. left and right side sections |
|
| 7BP703.0 |
System 2003 - Backplanes; 2003 module rack for 3 modules
incl. left and right side sections |
|
| 7BP704.0 |
System 2003 - Backplanes; 2003 module rack for 4 modules
incl. left and right side sections |
|
| 7BP705.0 |
System 2003 - Backplanes; 2003 module rack for 5 modules
incl. left and right side sections |
|
| 7BP706.0 |
System 2003 - Backplanes; 2003 module rack for 6 modules
incl. left and right side sections |
|
| 7BP707.0 |
System 2003 - Backplanes; 2003 module rack for 7 modules
incl. left and right side sections |
|
| 7BP708.0 |
System 2003 - Backplanes; 2003 module rack for 8 modules
incl. left and right side sections |
|
| 7BP709.0 |
System 2003 - Backplanes; 2003 module rack for 9 modules
incl. left and right side sections |
|
| 7BP710.0 |
System 2003 - Backplanes; 2003 module rack for 10 modules
incl. left and right side sections |
|
| 7CM211.7 |
System 2003 - Miscellaneous Modules; 2003 combined module
8 inputs, 24 VDC, 4 ms, sink
3 one channel or 2 two channel counter
or 2 Incremental encoder, 20 kHz
8 transistor outputs, 24 VDC, 0,5 A
Comparator, short-circuit protection
2 inputs, +/- 10 V / 0- |
|
| 7CP430.60-1 |
System 2003 - CPU Systems; 2003 CPU 4 Slots
100 KB SRAM, 256 KB FlashPROM
24 VDC, 7 W supply
1 RS232 interface
1 CAN interface
CAN: elec. isolated, network-capable
max. 64 digital / 32 analoge IOs |
|
| 7CP470.60-1 |
2003 Central Processor; 24VDC |
|
| 7CP470.60-2 |
System 2003 - CPU Systems; 2003 CPU
350 KB SRAM, 512 KB FlashPROM
24 VDC, 14 W supply
1 RS232 interface
1 CAN interface
CAN: elec. isolated, network-capable
max. 128 digital / 64 analoge IOs |
|
| 7CP472.60-1 |
2003 Central Processor; 24VDC, ANALOG EXPANSIO |
|
| 7CP474.60-1 |
System 2003 - CPU Systems; 2003 CPU
100 KB SRAM, 512 KB FlashPROM
24 VDC, 12,6 W supply
1 RS232 interface
1 CAN interface
CAN: elec. isolated, network-capable
4 slots for screw-in modules
max. 208 digital / 80 analog EAs |
|
| 7CP474.60-2 |
System 2003 - CPU Systems; 2003 CPU
750 KB SRAM, 512 KB FlashPROM
24 VDC, 12,6 W supply
1 RS232 interface
1 CAN interface
CAN: elec. isolated, network-capable
4 slots for screw-in modules
max. 208 digital / 80 analog EAs |
|
| 7CP476-010.9 |
System 2003 - CPU Systems; 2003 CPU with expansion,
750 kB SRAM, 1.5 MB FlashPROM,
24 VDC, 12,15 W supply,
1 RS232 interface,
1 CAN interface,
CAN: elec. isolated, network-capable,
4 slots for screw-in modules,
max. 272 digital / 80 analog I/O,
expansion: |
|
| 7CP476-020.9 |
System 2003 - CPU Systems; 2003 CPU with expansion,
750 kB SRAM, 1.5 MB FlashPROM,
24 VDC, 11,8 W supply,
1 RS232 interface,
1 CAN interface,
CAN: elec. isolated, network-capable,
4 slots for screw-in modules,
max. 272 digital / 80 analog I/O,
expansion:
|
|
| 7CP476.60-1 |
System 2003 - CPU Systems; 2003 CPU
750 kB SRAM, 1.5 MB FlashPROM
24 VDC, 12,5 W supply
1 RS232 interface
1 CAN interface
CAN: elec. isolated, network-capable
4 slots for screw-in modules
system bus for expansion modules
max. 272 digital / 80 analog I/O |
|
| 7CP570.60-1 |
System 2003 - CPU Systems; 2003 CPU,
Celeron 300,
64 MB DRAM, 512 kB SRAM,
24 VDC, 15 W supply
removable appl. memory: Compact Flash,
1 plug in slot for aPCI-modules,
1 USB interface,
1 RS232 interface,
1 Ethernet interface 100 Base-T,
Order application m |
|
| 7CP774.60-1 |
System 2003 - CPU Systems; 2003 CPU
100 KB SRAM, 512 KB FlashPROM
100-240 VAC, 12,6 W supply
1 RS232 interface
1 CAN interface
CAN: elec. isolated, network-capable
4 slots for screw-in modules
max. 208 digital / 80 analoge IOs |
|
| 7CX408.50-1 |
Compact Solutions - Bus-Controller; Distributed I/O, 24 VDC, 1 CAN Interface
electrically isolated," network capable,
16*DI 24VDC sink
2 Event counter,or 1 Inc. encoder, or
1 Gate time/Period duration measurement
12*DO 0.4 A, 4*DO 2 A, 24 VDC
2 Outputs wi |
|
| 7CX436.50-1 |
Compact Solutions - Bus-Controller; Distributed I/O, 24 VDC, 1 CAN Interface
electrically isolated, network capable,
8*DI 24VDC sink
2 Event counter,or 1 Inc. encoder, or
1 Gate time/Period duration measurement
4*DO 0.4 A, 4*DO 2 A, 24 VDC
2 Outputs with |
|
| 7DI135.7 |
2003 Digital IN; 1x4 24VDC, 50kHz |
|
| 7DI135.70 |
System 2003 - Digital Input Modules; 2003 digital input module
4 inputs 24 VDC, Sink
Incremental encoder operation: 50 kHz
Event counter operation: 100 kHz
1 comparator output 24 VDC
Screw-in module
Order terminal block 1 x TB712
separately! |
|
| 7DI138.70 |
System 2003 - Digital Input Modules; 2003 Digital input module,
10 Inputs 24 VDC, Sink,
2 Inputs for event counter operation,
Input frequency 20 kHz,
Screw-in module,
Order terminal block 1 x TB712
separately! |
|
| 7DI140.70 |
System 2003 - Digital Input Modules; 2003 Digital input module,
10 Inputs 24 VDC, Sink,
2 Inputs for event counter operation or
for direction dependant position
evaluation, Input frequency 50 kHz,
4 inputs can be used as high speed
inputs (e.g. gate, freq |
|
| 7DI435.7 |
System 2003 - Digital Input Modules; 2003 digital input module
8 inputs 24 VDC, 1 msec, sink/source
Order terminal blocks 3 x TB710
separately! |
|
| 7DI439.7 |
System 2003 - Digital Input Modules; 2003 digital input module
16 inputs 24 VDC, 1 msec, sink/source
Order terminal blocks 3 x TB718
separately! |
|
| 7DM435.7 |
System 2003 - Digital Mixed Modules; 2003 digital mixed module
8 inputs 24 VDC, 1 msec, sink/source
8 transistor outputs, 24 VDC, 0.5 A
Order terminal blocks 3 x TB710
separately! |
|
| 7DM438.72 |
System 2003 - Digital Mixed Modules; 2003 digital mixed module
8 inputs 24 VDC, 1 msec, sink/source
8 transistor outputs, 24 VDC, 0,5 A |
|
| 7DM465.7 |
System 2003 - Digital Mixed Modules; 2003 digital mixed module
16 inputs 24 VDC, 1 msec, sink
16 transistor outputs, 24 VDC, 0.5 A
Order terminal blocks 2 x TB718
separately! |
|
| 7DO135.7 |
2003 Digital OUT; 1x4 0,1A/24VDC, 100kHz |
|
| 7DO135.70 |
System 2003 - Digital Output Modules; 2003 digital output module
4 FET outputs 12 to 24 VDC, 0.1 A
Screw-in module
Order terminal block 1 x TB712
separately! |
|
| 7DO138.70 |
System 2003 - Digital Output Modules; 2003 Digital output module,
8 Outputs 24 VDC, 0.5 A,
Short circuit protection,
Thermal overload protection,
Screw-in module,
Order terminal block 1 x TB712
separately! |
|
| 7DO164.70 |
System 2003 - Digital Output Modules; 2003 digital output module
4 TRIAC outputs 48 to 125 VDC, 0.05 A
Zero cross detection
Screw-in module
Order terminal block 1 x TB712
separately! |
|
| 7DO435.7 |
System 2003 - Digital Output Modules; 2003 digital output module
8 FET outputs 24 VDC, 2 A
Outputs can be optionally used as inputs
Order terminal blocks 3 x TB710
separately! |
|
| 7DO720.7 |
System 2003 - Digital Output Modules; 2003 digital output module
8 relay outputs 240 VAC / 30 VDC, 2 A
Order terminal blocks 3 x TB710
separately! |
|
| 7DO722.7 |
System 2003 - Digital Output Modules; 2003 digital output module
8 relay outputs 240 VAC / 24 VDC, 2.5 A |
|
| 7EX270.50-1 |
System 2003 - Bus Controller Modules; 2003 CAN bus controller, 24 VDC,
4 W supply, 1 CAN interface,
electrically isolated, network capable
Order terminal block 1 x TB712
separately! |
|
| 7EX290.50-1 |
System 2003 - Bus Controller Modules; 2003 X2X Link bus controller, 24 VDC,
3.2 W supply,
1 X2X Link interface,
electrically isolated,
Order terminal block 1 x TB712
separately! |
|
| 7EX470.50-1 |
System 2003 - Bus Controller Modules; 2003 CAN bus controller
24 VDC, 14.5 W supply
2 CAN interface
electrically isolated, network-capable |
|
| 7EX477.50-2 |
System 2003 - Bus Controller Modules; 2003 Remote I/O bus controller,
24 VDC, 14 W supply,
1 electrically isolated RS485 interface
for Remote I/O bus connection |
|
| 7EX481.50-1 |
System 2003 - Bus Controller Modules; 2003 ETHERNET Powerlink bus controller,
1 ETHERNET Powerlink interface,
24 VDC, electrically isolated,
order terminal block 1 x TB704
separately! |
|
| 7EX484.50-1 |
System 2003 - Bus Controller Modules; 2003 ETHERNET Powerlink bus controller,
4 ETHERNET Powerlink interfaces,
24 VDC, electrically isolated,
order terminal block 1 x TB704
separately! |
|
| 7IF311.7 |
System 2003 - Communication Modules; 2003 interface module
1 RS232 interface
Screw-in module |
|
| 7IF321.7 |
System 2003 - Communication Modules; 2003 interface module
1 RS485/RS422 interface
Electrically isolated, network-capable
Screw-in module |
|
| 7IF361.70-1 |
System 2003 - Communication Modules; 2003 interface module
1 RS485 interface
Electrically isolated, network-capable
Transfer protocol: PROFIBUS DP
Screw-in module |
|
| 7IF371.70-1 |
System 2003 - Communication Modules; 2003 interface module,
1 CAN interface,
usage only with frame driver,
Electrically isolated, network-capable,
Screw-in module |
|
| 7ME010.9 |
PCMCIA slot expansion; for CP476 |
|
| 7ME020.9 |
PCMCIA slot expansion, plug-in slot; for CP476 |
|
| 7MM424.70-1 |
System 2003 - Miscellaneous Modules; 2003 Motor module, four digital motor
outputs, 24 VDC, 3 A up to 50°C,
max. starting current 10 A (max. 50 ms),
max. current and over termperature
electonically limited, Status LEDs,
Order terminal block 1 x TB710
sepa |
|
| 7MM432.70-1 |
System 2003 - Miscellaneous Modules; 2003 Motor bridge module, Two Motor-(H)-
Bridges, 10..30VDC @ 4A, Pick-Current up
to 8A (max. 2 s), Integrated Current
Closed Loop Controller - max. Current
electronically limited, 12 digital 24V
Inputs, Optionally usa |
|
| 7NC161.7 |
System 2003 - Counter and Positioning Modules; 2003 encoder module
Input frequency 100 kHz
Incremental or absolut, 32 bit
Encoder supply 5 VDC or 24 VDC
Screw-in module |
|
| 7TB710.91 |
System 2003 - Accessories; Accessory terminal block, 10 pins,
cage clamp, 2.5 sq. mm |
|
| 7TB712.81 |
System 2003 - Accessories; Accessory terminal block, 12 pins,
cage clamp, 1.5 sq. mm,
vibration protected with screw flange
|
|
| 7TB712.91 |
System 2003 - Accessories; Accessory terminal block, 12 pins,
cage clamp, 1.5 sq. mm |
|
| 7TB718.81 |
System 2003 - Accessories; Accessory terminal block, 18 pins,
cage clamp, 1.5 sq. mm,
vibration protected with screw flange |
|
| 7TB718.9 |
System 2003 - Accessories; Accessory terminal block, 18 pins,
screw clamp, 1.5 sq. mm |
|
| 7TB718.91 |
System 2003 - Accessories; Accessory terminal block, 18 pins,
cage clamp, 1.5 sq. mm |
|
| 7TB736.9 |
System 2003 - Accessories; 2003 terminal block, 36 pin
Screw clamp |
|
| 7TB736.91 |
System 2003 - Accessories; 2003 terminal block, 36 pins,
cage clamp |
|
| 7XV116.50-11 |
Compact I/O system; X2X controller, 16 Valve, IP20 |
|
| 7XV116.50-62 |
Compact I/O system; X2X Remote valve manifold connection 16x for 25-pin DSUB multi-pin connection, X2X link, electrically isolated, IP67 protection |
|
| 7XV124.50-11 |
Compact I/O system; X2X Remote valve manifold connection 24x for 25-pin DSUB multi-pin connection, GND pin 25, X2X link, electrically isolated, IP20protection |
|
| 7XV124.50-12 |
Compact I/O system; X2X Remote valve manifold connection 24x for 25-pin DSUB multi-pin connection,GND pin 13, X2X link, electrically isolated, IP20protection |
|
| 7XV124.50-61 |
Compact I/O system; X2X Remote valve manifold connection 24x for 25-pin DSUB multi-pin connection, X2X link, electrically isolated, IP67 protection |
|
| 7XV124.50-62 |
Compact I/O system; X2X Remote valve manifold connection 24x for 25-pin DSUB multi-pin connection, X2X link, electrically isolated, IP67 protection |
|
| 80MPD3.300S000-01 |
Drives - Stepper Motors; 2-phase hybrid stepper motor, 56 mm flange, length 57.5 mm, 3 A series / 6 A parallel, 1.8 Nm holding torque, 1.25 Nm stall torque |
|
| 80PS080X3.10-01 |
; Power supply module, input 3x 380-480 VAC ±10%, power output 24-80 VDC 16.6 A (max. 1000 W), voltage output 24 VDC 2 A, X2X Link interface, integrated brake chopper, wall mounting. Order terminal blocks separately. |
|
| 8AC110.60-1 |
Drives - Network + Comm.; ACOPOS plug-in module,
CAN interface |
|
| 8AC110.60-2 |
Drives - Network + Comm.; ACOPOS plug-in module, CAN Interface |
|
| 8AC110.60-3 |
Drives - Network + Comm.; ACOPOS plug-in module, CAN Interface |
|
| 8AC112.60-1 |
Drives - Network + Comm.; ACOPOS plug-in module, Ethernet Powerlink
Interface |
|
| 8AC114.60-2 |
Drives - Network + Comm.; ACOPOS plug-in module, Ethernet Powerlink
Interface |
|
| 8AC120.60-1 |
Drives - Encoder Modules; ACOPOS plug-in module,
EnDat encoder interface |
|
| 8AC121.60-1 |
Drives -; Acopos Hiperface/Interface |
|
| 8AC122.60-1 |
Drives - Encoder Modules; ACOPOS plug-in module,
resolver interface |
|
| 8AC122.60-2 |
Drives - Encoder Modules; ACOPOS plug-in module, Resolver Interface |
|
| 8AC122.60-3 |
Drives - Encoder Modules; ACOPOS plug-in module, Resolver Interface 10 kHz |
|
| 8AC123.60-1 |
Drives - ; ACOPOS plug-in module,
incremental position encoder and
SSI-absolute encoder interface
|
|
| 8AC126.60-1 |
Drives - Encoder Modules; ACOPOS plug-in module, En
Dat 2.2 encoder interface |
|
| 8AC130.60-1 |
Drives - ; ACOPOS plug-in module,
8 digital I/O configurable in pairs
as 24V input or as output 400/100mA,
2 digital outputs 2A,
Order TB712 terminal block separately |
|
| 8AC131.60-1 |
Drives - ; ACOPOS plug-in module, analog input |
|
| 8B0F0160H000.A00-1 |
Acopos; Passive line filter, 16 A, 3x 480 VAC, 50/60 Hz, IP20 |
|
| 8B0F0300H000.000-1 |
Acopos Multi; ACOPOSmulti passive line filter, 30 A, 3x 520/300 VAC, 50/60 Hz, IP20 |
|
| 8B0M0120HW00.000-1 |
Acopos Multi; ACOPOSmulti mounting plate with backplane, 12 slots, HV, wall mounting, 75 mm² and 22 mm², complete |
|
| 8BAC0120.000-1 |
Acopos Multi; ACOPOSmulti plug-in module, EnDat 2.1 interface |
|
| 8BCF0010.1221B-0 |
Acopos Cables; ACPm EnDat 2.2 cable 10 m, SpringTec |
|
| 8BCM0010.1034C-0 |
Acopos Cables; ACPu Motor cable 10m, 0.75mm², SpringTec |
|
| 8BCM0010.1312A-0 |
Acopos Cables; ACPm motor cable 10m, 4mm², SpeedTec S 1 |
|
| 8BCR0010.1111A-0 |
Acopos Cables; ACPm resolver cable 10 m, SpeedTec |
|
| 8BVI0055HCD0.000-1 |
Acopos Multi; ACOPOSmulti inverter unit, 7.6 A, HV, cold plate or feed through mounting, 2 axes |
|
| 8BVI0055HWD0.000-1 |
Acopos Multi; ACOPOSmulti inverter unit, 7.6 A, HV, wall mounting, 2 axes |
|
| 8BVI0110HWS0.000-1 |
Acopos Multi; ACOPOSmulti inverter unit, 15.1 A, HV, wall mounting |
|
| 8CE003.12-1 |
Drives - Accessories; EnDat cable, length 3m,
10 x 0.14mm² + 2 x 0.5mm²,
EnDat plug 17pin Intercontec socket,
servo plug 15pin D-type plug,
can be used in cable drag chains,
UL/CSA listed
|
|
| 8CE004.12-1 |
Drives - Accessories; EnDat cable, length 4m,
10 x 0.14mm² + 2 x 0.5mm²,
EnDat plug 17pin Intercontec socket,
servo plug 15pin D-type plug,
can be used in cable drag chains,
UL/CSA listed
|
|
| 8CE005.12-1 |
Drives - Accessories; EnDat cable, length 5m,
10 x 0.14mm² + 2 x 0.5mm²,
EnDat plug 17pin Intercontec socket,
servo plug 15pin D-type plug,
can be used in cable drag chains,
UL/CSA listed
|
|
| 8CE007.12-1 |
Drives - Accessories; EnDat cable, length 7m,
10 x 0.14mm² + 2 x 0.5mm²,
EnDat plug 17pin Intercontec socket,
servo plug 15pin D-type plug,
can be used in cable drag chains,
UL/CSA listed
|
|
| 8CE010.12-1 |
Drives - Accessories; EnDat cable, length 10m,
10 x 0.14mm² + 2 x 0.5mm²,
EnDat plug 17pin Intercontec socket,
servo plug 15pin D-type plug,
can be used in cable drag chains,
UL/CSA listed
|
|
| 8CE015.12-1 |
Drives - Accessories; EnDat cable, length 15m,
10 x 0.14mm² + 2 x 0.5mm²,
EnDat plug 17pin Intercontec socket,
servo plug 15pin D-type plug,
can be used in cable drag chains,
UL/CSA listed
|
|
| 8CE025.12-1 |
Drives - Accessories; EnDat cable, length 25m,
10 x 0.14mm² + 2 x 0.5mm²,
EnDat plug 17pin Intercontec socket,
servo plug 15pin D-type plug,
can be used in cable drag chains,
UL/CSA listed
|
|
| 8CH005.12-1 |
Drives - Accessories; ACOPOS motor hybrid cable,length 5 m, 4x 1.5mm² + 2x 0.75mm² + 2x 0.24 mm² + 2x 2x 0.15 mm²,motor plug 7-pin SpeedTec socket,can be used in cable drag chains,UL/CSA listed |
|
| 8CH005.12-3 |
Drives - Accessories; ACOPOS motor hybrid cable,length 5 m, 4x 4mm² + 2x 1mm² + 2x 0.24 mm² + 2x 2x 0.15 mm²,motor plug 7-pin SpeedTec socket,can be used in cable drag chains,UL/CSA listed |
|
| 8CH007.12-1 |
Drives - Accessories; ACOPOS motor hybrid cable,length 7 m, 4x 1.5mm² + 2x 0.75mm² + 2x 0.24 mm² + 2x 2x 0.15 mm²,motor plug 7-pin SpeedTec socket,can be used in cable drag chains,UL/CSA listed |
|
| 8CH007.12-3 |
Drives - Accessories; ACOPOS motor hybrid cable,length 7 m, 4x 4mm² + 2x 1mm² + 2x 0.24 mm² + 2x 2x 0.15 mm²,motor plug 7-pin SpeedTec socket,can be used in cable drag chains,UL/CSA listed |
|
| 8CH010.12-1 |
Drives - Accessories; ACOPOS motor hybrid cable,length 10 m, 4x 1.5mm² + 2x 0.75mm² + 2x 0.24 mm² + 2x 2x 0.15 mm²,motor plug 7-pin SpeedTec socket,can be used in cable drag chains,UL/CSA listed |
|
| 8CM003.12-1 |
Drives - Accessories; Motor cable, length 3m,
4 x 1.5mm² + 2 x 2 x 0.75mm²,
motor plug 8pin. Intercontec socket,
can be used in cable drag chains,
UL/CSA listed
|
|
| 8CM003.12-5 |
Drives - Accessories; Motor cable, length 3m, 4x10mm²,
2x2x1.5mm², motor plug 8pin.
Intercontec socket,
can be used in cable drag chains,
UL/CSA listed |
|
| 8CM004.12-1 |
Drives - Accessories; Motor cable, length 4m,
4 x 1.5mm² + 2 x 2 x 0.75mm²,
motor plug 8pin. Intercontec socket,
can be used in cable drag chains,
UL/CSA listed
|
|
| 8CM004.12-3 |
Drives - Accessories; Motor cable, length 4m, 4x4mm², 2x2x1m m²,
motor plug 8pin. Intercontec socket,
can be used in cable drag chains,
UL/CSA listed |
|
| 8CM005.12-1 |
Drives - Accessories; Motor cable, length 5m,
4 x 1.5mm² + 2 x 2 x 0.75mm²,
motor plug 8pin. Intercontec socket,
can be used in cable drag chains,
UL/CSA listed |
|
| 8CM005.12-5 |
Drives - Accessories; Motor cable, length 5m, 4x10mm²,
2x2x1.5mm², motor plug 8pin.
Intercontec socket,
can be used in cable drag chains,
UL/CSA listed |
|
| 8CM006.12-1 |
Drives - Accessories; Motor cable, length 6m, 4x1.5mm²,
2x2x0.75mm²,
motor plug 8pin. Intercontec socket,
can be used in cable drag chains,
UL/CSA listed |
|
| 8CM006.12-3 |
Drives - Accessories; Motor cable, length 6m, 4x4mm²,
2x2x1mm²,
motor plug 8pin. Intercontec socket,
can be used in cable drag chains,
UL/CSA listed |
|
| 8CM007.12-1 |
Drives - Accessories; Motor cable, length 7m,
4 x 1.5mm² + 2 x 2 x 0.75mm²,
motor plug 8pin. Intercontec socket,
can be used in cable drag chains,
UL/CSA listed
|
|
| 8CM007.12-3 |
Drives - Accessories; Motor cable, length 7m, 4x4mm², 2x2x1m m²,
motor plug 8pin. Intercontec socket,
can be used in cable drag chains,
UL/CSA listed |
|
| 8CM008.12-1 |
Drives - Accessories; Motor cable, length 8m, 4x1.5mm²,
2x2x0.75mm², motor plug 8pin.
Intercontec socket,
can be used in cable drag chains,
UL/CSA listed |
|
| 8CM008.12-3 |
Drives - Accessories; Motor cable, length 8m, 4x4mm²,
2x2x1mm², motor plug 8pin.
Intercontec socket,
can be used in cable drag chains,
UL/CSA listed |
|
| 8CM009.12-1 |
Drives - Accessories; Motor cable, length 9m, 4x1.5mm²,
2x2x0.75mm², motor plug 8pin.
Intercontec socket,
can be used in cable drag chains,
UL/CSA listed |
|
| 8CM009.12-3 |
Drives - Accessories; Motor cable, length 9m, 4x4mm², 2x2x1m m²,
motor plug 8pin. Intercontec socket,
can be used in cable drag chains,
UL/CSA listed |
|
| 8CM010.12-1 |
Drives - Accessories; Motor cable, length 10m,
4 x 1.5mm² + 2 x 2 x 0.75mm²,
motor plug 8pin. Intercontec socket,
can be used in cable drag chains,
UL/CSA listed
|
|
| 8CM010.12-3 |
Drives - Accessories; Motor cable, length 10m, 4x4mm²,
2x2x1mm², motor plug 8pin.
Intercontec socket,
can be used in cable drag chains,
UL/CSA listed |
|
| 8CM010.12-5 |
Drives - Accessories; Motor cable, length 10m, 4x10mm²,
2x2x1.5mm², motor plug 8pin.
Intercontec socket,
can be used in cable drag chains,
UL/CSA listed |
|
| 8CM012.12-1 |
Drives - Accessories; Motor cable, length 12m, 4x1.5mm²,
2x2x0.75mm², motor plug 8pin.
Intercontec socket,
can be used in cable drag chains,
UL/CSA listed |
|
| 8CM015.12-1 |
Drives - Accessories; Motor cable, length 15m,
4 x 1.5mm² + 2 x 2 x 0.75mm²,
motor plug 8pin. Intercontec socket,
can be used in cable drag chains,
UL/CSA listed
|
|
| 8CM015.12-3 |
Drives - Accessories; Motor cable, length 15m, 4x4mm²,
2x2x1mm², motor plug 8pin.
Intercontec socket,
can be used in cable drag chains,
UL/CSA listed |
|
| 8CM025.12-1 |
Drives - Accessories; motor cable, length 25m,
4 x 1.5mm² + 2 x 2 x 0.75mm²,
motor plug 8pin. Intercontec socket,
can be used in cable drag chains,
UL/CSA listed
|
|
| 8CM025.12-3 |
Drives - Accessories; Motor cable, length 25m, 4x4mm²,
2x2x1mm², motor plug 8pin.
Intercontec socket,
can be used in cable drag chains,
UL/CSA listed |
|
| 8CM030.12-1 |
Drives - Accessories; Motor cable, length30m, 4x1.5mm²,
2x2x0.75mm², motor plug 8pin.
Intercontec socket,
can be used in cable drag chains,
UL/CSA listed |
|
| 8CR003.12-1 |
Drives - Accessories; Resolver cable, length 3m,
3 x 2 x 24 AWG/19,
resolver plug 12pin Intercontec socket,
servo plug 9pin D-type plug,
can be used in cable drag chains,
UL/CSA listed |
|
| 8CR004.12-1 |
Drives - Accessories; Resolvercable, length 4m,
3 x 2 x 24 AWG/19,
resolver plug 12pin Intercontec socket,
servo plug 9pin. D-type plug,
can be used in cable drag chains,
UL/CSA listed |
|
| 8CR005.12-1 |
Drives - Accessories; resolver cable, length 5m,
3 x 2 x 24 AWG/19,
resolver plug 12pin Intercontec socket,
servo plug 9pin D-type plug,
can be used in cable drag chains,
UL/CSA listed
|
|
| 8CR006.12-1 |
Drives - Accessories; Resolver cable, length 6m, 3x2x24 AWG/19,
resolver plug 12pin Intercontec socket,
servo plug 9pin D-type plug,
can be used in cable drag chains,
UL/CSA listed |
|
| 8CR007.12-1 |
Drives - Accessories; Resolver cable, length 7m,
3 x 2 x 24 AWG/19,
resolver plug 12pin Intercontec socket,
servo plug 9pin D-type plug,
can be used in cable drag chains,
UL/CSA listed
|
|
| 8CR008.12-1 |
Drives - Accessories; Resolver cable, length 8m, 3x2x24 AWG/19,
resolver plug 12pin Intercontec socket,
servo plug 9pin D-type plug,
can be used in cable drag chains,
UL/CSA listed |
|
| 8CR009.12-1 |
Drives - Accessories; Resolver cable, length 9m, 3x2x24 AWG/19,
resolver plug 12pin Intercontec socket,
servo plug 9pin D-type plug,
can be used in cable drag chains,
UL/CSA listed |
|
| 8CR010.12-1 |
Drives - Accessories; Resolver cable, length 10m,
3 x 2 x 24 AWG/19,
resolver plug 12pin Intercontec socket,
servo plug 9pin D-type plug,
can be used in cable drag chains,
UL/CSA listed
|
|
| 8CR012.12-1 |
Drives - Accessories; Resolver cable, length 12m, 3x2x24 AWG/19,
motor plug 12pin Intercontec socket,
servo plug 9pin D-type plug,
can be used in cable drag chains,
UL/CSA listed |
|
| 8CR015.12-1 |
Drives - Accessories; Resolver cable, length 15m,
3 x 2 x 24 AWG/19,
resolver plug 12pin Intercontec socket,
servo plug 9pin D-type plug,
can be used in cable drag chains,
UL/CSA listed
|
|
| 8CR025.12-1 |
Drives - Accessories; Resolver cable, length 25m,
3 x 2 x 24 AWG/19,
resolver plug 12pin Intercontec socket,
servo plug 9pin D-type plug,
can be used in cable drag chains,
UL/CSA listed
|
|
| 8EAC0150.000-1 |
Acopos; Acopos P3 plug-in module, 1x digital multi-encoder interface |
|
| 8EAD0000.000-1 |
Acopos; Display Unit, LCD, 128 x 64, black/white, 1x USB 3.0 |
|
| 8ECH0003.1111A-0 |
Acopos; ACOPOS P3 hybrid motor cable, length 3 m, 4x 1.5mm² + 2x 0.75mm² + 2x 0.24 mm² + 2x 2x 0.15 mm², hybrid motor connector 13-pin SpeedTec female, can be used in cable drag chains |
|
| 8ECH0010.1111A-0 |
Drives - Accessories; ACOPOS P3 hybrid motor cable, length 10 m, 4x 1.5 mm² +2x 0.75 mm² + 2x 0.30 mm² + 2x 2x 0.15 mm², 13-pin femalespeedtec hybrid motor connector, can be used in cable dragchains |
|
| 8ECH0010.1312A-0 |
Drives - Accessories; ACOPOS P3 hybrid cable,length 10 m, 4x 4mm² + 2x 0.75mm² + 2x 0.24 mm² + 2x 2x 0.15 mm²,motor plug 7-pin SpeedTec socket female,can be used in cable drag chains,UL/CSA listed |
|
| 8EI024HWS10.0A00-1 |
Acopos P3 servo drive; ACOPOS DRIVER P3 servo drive, 1 digital multi-standard encoder interface per axis, 3x 200-480 VAC, 24 A, 1 axis, wall mounting REF. |
|
| 8EI2X2MWT10.0600-1 |
Acopos P3 servo drive; 1 digital multi-standard encoder per axis 3x200-230 Vac 1x110-230 Vac, 2,2 Amps 3 axis wall mounting, terminal block set, single row, integrated brake resistor
interface per axis, 3x 200-230 VAC, 1x 110-230 VAC, 2,2
A, 3 axes, wa |
|
| 8GP40-060—010S2V2 3 |
; Two-stage; Planetary gearbox 8GP40; Size 060; i = 10 8LVA motor with size 3; Backlash: 15 arcmin; Degree of protection IP 54 Shaft with keyway DIN6885; Output shaft diameter: 14,0 mm Nominal output torque: 40,0 Nm; Max. output torque: 64,0 Nm Ø input sp |
|
| 8GP40-LVA22-00001 |
; Two-stage; Planetary gearbox for motor LVA22 |
|
| 8I0XF084.020-1 |
; Fan for ACOPOSinverter 3x 200 to 240 V, 0.37 to 1.5 kW and 3x 380 to 480 V, 0.75 to 2.2 kW. |
|
| 8I0XF084.055-1 |
; Fan for ACOPOSinverter P84 3x 200 to 240 V, 11 to 15 kW and 3x 380 to 480 V, 15 to 18.5 kW. |
|
| 8LSA35.DA030S000-3 |
Drives - Synchronous Motors; Synchronous Motor,4poles,nN=3000min-1, 2,3 Nm, plane shaft,single cable turnable connector type S, Flange 80mm j6,selfcooled, IP64, 680V bus, Encoder DA EnDat inductive 32-line single-turn |
|
| 8LSA35.DA060S000-3 |
Drives - Synchronous Motors; Synchronous Motor, 4poles,nN=6000min-1, 2,3 Nm, plane shaft,single cable turnable connector type S, Flange 80mm j6,selfcooled, IP64, 680V bus, Encoder DA EnDat inductive 32-line single-turn |
|
| 8LSA35.DB030S000-3 |
Drives - Synchronous Motors; Synchronous motor; number of pole pairs: 4 pairs; nominal speed: 3000 rpm stall torque: 2.300 Nm; no brake; smooth shaft; angled connector (swivel) single-cable solution; centering diameter 80 mm; j6 fit (self-cooling, constru |
|
| 8LSA35.E2030D000-0 |
Drives - Synchronous Motors; Synchronous Motor, 4poles,
nN=3000min-1, To=2,3 Nm ,plane shaft,
turnable connector, Flange 80mm j6,
selfcooled, IP64, 680V bus, Encoder
EnDat 32 periods |
|
| 8LSA35.E3030D000-0 |
Drives - Synchronous Motors; Synchronous Motor, 4poles,
nN=3000min-1, To=2,3Nm, plane shaft,
turnable connector, Flange 95mm j6,
selfcooled, IP64, 680V bus, Encoder
EnDat 32 periods multiturn |
|
| 8LSA35.EA030D700-0 |
Drives - Synchronous Motors; Synchronous motor; number of pole pairs: 2 pairs; nominal speed: 3000 rpm, stall torque: 2.300 Nm; motor without holding brake; keyed shaft; angled connector (swivel); centering diameter 80 mm;j6 A fit(self-cooling, constructi |
|
| 8LSA35.EA030D700-3 |
Drives - Synchronous Motors; Synchronous motor; number of pole pairs: 2 pairs; nominal speed: 3000 rpm, stall torque: 2.300 Nm; motor without holding brake; keyed shaft; angled connector (swivel); centering diameter 80 mm;j6 A fit(self-cooling, constructi |
|
| 8LSA35.EB060D000-0 |
Drives - Synchronous Motors; Synchronous motor; number of pole pairs: 2 pairs; nominal speed: 6000 rpmstall torque: 2.300 Nm; no brake; smooth shaft; angled connector (swivel); centering diameter 80 mm; j6 A fit (self-cooling, construction type A); IP64 p |
|
| 8LSA35.EB060D200-0 |
Drives - Synchronous Motors; Synchronous motor; number of pole pairs: 2 pairs; nominal speed: 6000 rpmstall torque: 2.300 Nm; motor with holding brake; smooth shaft; angled connector (swivel); centering diameter 80 mm;j6 A fit(self-cooling, construction t |
|
| 8LSA43.EB030D300-3 |
Drives - Synchronous Motors; Synchronous Motor,5poles,
nN=3000min-1,= T3,1.Nm, with Brake. |
|
| 8LSA44.DA030S000-3 |
Drives - Synchronous Motors; Synchronous Motor, 10poles,nN=3000min-1, 6,0 Nm, plane shaft,single cable turnable connector type S, Flange 95mm j6,selfcooled, IP64, 680V bus, Encoder DA EnDat inductive 32-line single-turn |
|
| 8LSA44.E2030D000-0 |
Drives - Synchronous Motors; Synchronous Motor, 4poles,
nN=3000min-1, To=6Nm, plane shaft,
turnable connector, Flange 95mm j6,
selfcooled, IP64, 680V bus, Encoder
EnDat 32 periods |
|
| 8LSA44.E3030C100-0 |
Drives - Synchronous Motors; Synchronous Motor, 5 polepairs, nN =3000, Mo=6Nm, keyway, connector up,
Flange 95mm j6, selfcooled, IP64, 680VUzk, Encoder EnDat 32 periods multiturn |
|
| 8LSA44.E3030C300-0 |
Drives - Synchronous Motors; Synchronous Motor, 4poles,
nN=3000min-1, To=5,3Nm, keyed shaft,
turnable connector, Flange 95mm j6,
selfcooled, IP64, 680V bus, Encoder
EnDat 32 periods multiturn |
|
| 8LSA44.E3030D100-0 |
Drives - Synchronous Motors; Synchronous Motor, 4poles,
nN=3000min-1, To=5,3N keyed shaft,
turnable connector, Flange 95mm j6,
selfcooled, IP64, 680V bus, Encoder
EnDat 32 periods multiturn |
|
| 8LSA46.E2030D000-0 |
Drives - Synchronous Motors; Synchronous Motor, 8poles,
nN=3000min-1, To=10Nm, plane shaft,
turnable connector, Flange 95mm j6,
selfcooled, IP64, 680V bus, Encoder
EnDat 32 periods inductive |
|
| 8LSA54.R0045D200-1 |
Drives - Synchronous Motors; Synchronous Motor, 8poles,
nN45000min-1, To=8Nm, plane shaft,
connector turnable, Flange 130mm j6,
selfcooled, IP64, 680VResolver, 2 pol, Normal Brake |
|
| 8LSA55.DA030S200-3 |
Drives - Synchronous Motors; Synchronous Motor, 8poles,nN=3000min-1, 12.5 Nm, plane shaft,single cable turnable connector type S, Flange 130mm j6,selfcooled, IP64, 680V bus, Encoder DA EnDat inductive 32-line single-turn, brake |
|
| 8LSA55.E2030D200-1 |
Drives - Synchronous Motors; Synchronous Motor, 8poles,
nN=3000min-1, 12,5 Nm, plane shaft,
connector turnable, Flan265mm j6,
selfcooled, IP64, 680V bus, Encoder
EnDa512 periods |
|
| 8LSA57.DA030S200-3 |
Drives - Synchronous Motors; Synchronous Motor, 8poles,nN=3000min-1, 20.0 Nm, plane shaft,single cable turnable connector type S, Flange 130mm j6,selfcooled, IP64, 680V bus, Encoder DA EnDat inductive 32-line single-turn, brake |
|
| 8LSA57.E2030D200-1 |
Drives - Synchronous Motors; Synchronous Motor, 8poles,
nN=3000min-1, To=20Nm, plane shaft,
connector turnable, Flange 130mm j6,
selfcooled, IP64, 680V bus, Encoder
EnDat 32 periods inductive, with brake |
|
| 8LSA65.E1045D004-1 |
Drives - Synchronous Motors; Synchronous Motor, 8poles,
nN=4500min-1, To=24Nm, plane shaft, connector angle,
Flange 190mm j6, selfcooled, IP64, 680V
Endat multi-turn 512 lines, reinforced A side bearing |
|
| 8LSA65.R0045C004-1 |
Drives - Synchronous Motors; Synchronous Motor, 8poles,
nN=4500min-1, To=24Nm, plane shaft, connector top,
Flange 190mm j6, selfcooled, IP64, 680V
bus, Resolver 2 pole, reinforced A side bearing |
|
| 8LSA66.E1030C004-1 |
Drives - Synchronous Motors; Synchronous Motor, 8poles,
nN=3000min-1, To=28Nm, plane shaft, connector top,
Flange 190mm j6, selfcooled, IP64, 680V
bus, Encoder EnDat 512 periods multiturn, reinforced A side bearing |
|
| 8LSA66.E1030D004-1 |
Drives - Synchronous Motors; Synchronous Motor, 8poles,
nN=3000min-1, To=28Nm, plane shaft, connect angle,
Flange 190mm j6, selfcooled, IP64, 680V
bus, Encoder EnDat 512 periods multiturn, reinforced A side bearing |
|
| 8LSA73.DA030S000-3 |
Drives - Synchronous Motors; Synchron Motor, 6 poles, nM=3000min-1,
Mo=26Nm, plane shaft, single cable turnable connector type S,
Flange 190mm j6, selfcooled, IP64,
560V Uzk, Encoder Endat 32 DA periods inductive. |
|
| 8LSA75.DA030S000-3 |
Drives - Synchronous Motors; Synchron Motor, 6 poles, nM=3000min-1,
Mo=32Nm, keyway, connector up,
Flange 180mm j6, selfcooled, IP64,
560V Uzk, Resolver 2 pole. |
|
| 8LVA13.R0030D000-0 |
Drives - Synchronous Motors; Synchronous motor, self-cooling, size 1, length 3, speed 3000 rpm, Resolver |
|
| 8LVA22.R0015D000-0 |
Drives - Synchronous Motors; Synchronous motor, self-cooling, size 2, length 2, speed 1500 rpm, Resolver |
|
| 8LVA33.R0021D000-0 |
Drives - Synchronous Motors; Synchronous motor, self-cooling, size 4, length 2, speed 2100 rpm, Resolver |
|
| 8MSA2S.R0-I8 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=6000min-1,
T0=0,2Nm, with brake TH=1,8Nm, plane
shaft, connector B side, Flange 40mm
j6, selfcooled, IP64, 680V Uzk,
Resolver 2 pole |
|
| 8MSA2S.R0-K6 |
Drives - Synchronous Motors; Synchron Motor, 6pole, nM=6000min-1,
Mo=0,2Nm, with brake TH=1,8Nm, plane
shaft, connector up, Flange 40mm j6,
selfcooled, IP64, 680V Uzk, Resolver 2
pole |
|
| 8MSA3L.E0-31 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=3000min-1,
T0=2,5Nm, keyway, connector A side,
Flange 80mm j6, selfcooled, IP64, 680V
Uzk, Encoder EnDat 512 periods
singelturn |
|
| 8MSA3L.E0-V4 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=4500min-1,
T0=2,5Nm, plane shaft, connector B
side, Flange 80mm j6, selfcooled, IP64,
680V Uzk, Encoder EnDat 512 periods
singelturn |
|
| 8MSA3L.E1-30 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=3000min-1,
T0=2,5Nm, plane shaft, connector A
side, Flange 80mm j6, selfcooled, IP64,
680V Uzk, Encoder EnDat 512 periods
multiturn |
|
| 8MSA3L.E1-31 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=3000min-1,
T0=2,5Nm, keyway, connector A side,
Flange 80mm j6, selfcooled, IP64, 680V
Uzk, Encoder EnDat 512 periods
multiturn |
|
| 8MSA3L.E1-69 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=4500min-1,
T0=2,5Nm, with brake TH=4Nm, keyway,
connector A side, Flange 80mm j6,
selfcooled, IP64, 680V Uzk, Encoder
EnDat 512 periods multiturn |
|
| 8MSA3L.E1-I6 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=6000min-1,
T0=2,5Nm, plane shaft, connector B
side, Flange 80mm j6, selfcooled, IP64,
680V Uzk, Encoder EnDat 512 periods
multiturn |
|
| 8MSA3L.E2-73 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=3000min-1,
T0=2,5Nm, keyway, connector A side,
Flange 80mm j6, selfcooled, IP65, With
oil seal, 680V Uzk, Encoder EnDat 32
periods singelturn |
|
| 8MSA3L.E3-33 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=3000min-1,
T0=2,5Nm, with brake TH=4Nm, keyway,
connector A side, Flange 80mm j6,
selfcooled, IP64, 680V Uzk, Encoder
EnDat 32 periods multiturn |
|
| 8MSA3L.E3-86 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=6000min-1,
T0=2,5Nm, with brake TH=4Nm, plane
shaft, connector A side, Flange 80mm
j6, selfcooled, IP65, With oil seal,
680V Uzk, Encoder EnDat 32 periods
multiturn |
|
| 8MSA3L.R0-30 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=3000min-1,
T0=2,5Nm, plane shaft, connector A
side, Flange 80mm j6, selfcooled, IP64,
680V Uzk, Resolver 2 pole |
|
| 8MSA3M.E3-43 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=6000min-1,
T0=1,3Nm, keyway, connector A side,
Flange 80mm j6, selfcooled, IP64, 680V
Uzk, Encoder EnDat 32 periods multiturn |
|
| 8MSA4L.E0-31 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=3000min-1,
T0=7,5Nm, keyway, connector A side,
Flange 95mm j6, selfcooled, IP64, 680V
Uzk, Encoder EnDat 512 periods
singelturn |
|
| 8MSA4L.R0-30 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=3000min-1,
T0=7,5Nm, plane shaft, connector A
side, Flange 95mm j6, selfcooled, IP64,
680V Uzk, Resolver 2 pole |
|
| 8MSA4L.R0-31 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=3000min-1,
T0=7,5Nm, keyway, connector A side,
Flange 95mm j6, selfcooled, IP64, 680V
Uzk, Resolver 2 pole |
|
| 8MSA4L.R0-32 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=3000min-1,
T0=7,5Nm, with brake TH=8Nm, plane
shaft, connector A side, Flange 95mm
j6, selfcooled, IP64, 680V Uzk,
Resolver 2 pole |
|
| 8MSA4L.R0-33 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=3000min-1,
T0=7,5Nm, with brake TH=8Nm, keyway,
connector A side, Flange 95mm j6,
selfcooled, IP64, 680V Uzk, Resolver 2
pole |
|
| 8MSA4L.R0-44 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=6000min-1,
T0=7,5Nm, with brake TH=8Nm, plane
shaft, connector A side, Flange 95mm
j6, selfcooled, IP64, 680V Uzk,
Resolver 2 pole |
|
| 8MSA4M.E0-67 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=4500min-1,
T0=5,3Nm, keyway, connector A side,
Flange 95mm j6, selfcooled, IP64, 680V
Uzk, Encoder EnDat 512 periods
singelturn |
|
| 8MSA4M.E0-69 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=4500min-1,
T0=5,3Nm, with brake TH=8Nm, keyway,
connector A side, Flange 95mm j6,
selfcooled, IP64, 680V Uzk, Encoder
EnDat 512 periods singelturn |
|
| 8MSA4M.E3-31 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=3000min-1,
T0=5,3Nm, keyway, connector A
side, Flange 95mm j6, selfcooled, IP64,
680V Uzk, Encoder EnDat 32 periods
multiturn |
|
| 8MSA4M.E3-86 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=6000min-1,
T0=5,3Nm, with brake TH=8Nm, plane
shaft, connector A side, Flange 95mm
j6, selfcooled, IP65, With oil seal,
680V Uzk, Encoder EnDat 32 periods
multiturn |
|
| 8MSA4M.R0-30 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=3000min-1,
T0=5,3Nm, plane shaft, connector A
side, Flange 95mm j6, selfcooled, IP64,
680V Uzk, Resolver 2 pole |
|
| 8MSA4M.R0-31 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=3000min-1,
T0=5,3Nm, keyway, connector A side,
Flange 95mm j6, selfcooled, IP64, 680V
Uzk, Resolver 2 pole |
|
| 8MSA4M.R0-32 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=3000min-1,
T0=5,3Nm, with brake TH=8Nm, plane
shaft, connector A side, Flange 95mm
j6, selfcooled, IP64, 680V Uzk,
Resolver 2 pole |
|
| 8MSA4M.R0-33 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=3000min-1,
T0=5,3Nm, with brake TH=8Nm, keyway,
connector A side, Flange 95mm j6,
selfcooled, IP64, 680V Uzk, Resolver 2
pole |
|
| 8MSA5L.E0-D5 |
ACOPOS Synchron Motor; Synchron Motor, nN=3000min-1, T0=13,5Nm,
with brake TH=12Nm, keyway,
connector up, Flange 130mm j6,
selfcooled, IP64, 560V Uzk,
Geber EnDat 512 periods singleturn |
|
| 8MSA5L.E0-V7 |
ACOPOS Synchron Motor; Synchron Motor, 6pin, nM=4500min-1,
Mo=13,5Nm, with brake TH=12Nm, keyway,
connector B side, Flansch 130mm j6,
selfcooled, IP64, 560V Uzk,
Geber EnDat 512 periods singelturn |
|
| 8MSA5L.E1-B7 |
ACOPOS Synchron Motor; Synchron Motor, 6pin, nM=3000min-1,
Mo=13,5Nm, with brake TH=12Nm, keyway,
connector B side, Flansch 130mm j6,
selfcooled, IP64, 560V Uzk,
Geber EnDat 512 periods multiturn |
|
| 8MSA5L.R0-V6 |
ACOPOS Synchron Motor; Synchron Motor, 6pin, nM=4500min-1,
Mo=13,5Nm, with brake TH=12Nm,
plane shaft, connector B side,
Flansch 130mm j6, selfcooled, IP64,
560V Uzk, Resolver 1 pole |
|
| 8MSA5L.R0-X4 |
ACOPOS Synchron Motor; Synchron Motor, nN=4500min-1, T0=13,5Nm,with brake,
plane shaft, connector up,
Flange 130mm j6, selfcooled, IP65,
560V Uzk, Resolver 1 pole |
|
| 8MSA5M.R0-X2 |
ACOPOS Synchron Motor; Synchron Motor, nN=4500min-1, T0=10,5Nm,
plane shaft, connector up,
Flange 130mm j6, selfcooled, IP64,
560V Uzk, Resolver 1 pole |
|
| 8MSA6L.R0-D5 |
ACOPOS Synchron Motor; Synchron Motor, 6pin, nM=3000min-1,
Mo=22Nm, with brake TH=20Nm, keyway,
connector up, Flange 180mm j6,
selfcooled, IP64, 560V Uzk,
Resolver 2 pole |
|
| 8MSA6L.R0-X241 |
ACOPOS Synchron Motor; Synchron Motor, 6pin, nM=4500min-1,
MO=22Nm, plane shaft, connector up,
Flansch 180mm j6, selfcooled, IP64,
560V Uzk, Resolver 1 pole. Reinforced bearing "A" side option |
|
| 8MSA6M.R0-D200-1 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=3000min-1,
T0=19Nm, plane shaft, connector up,
Flange 180mm j6, selfcooled, IP64, 680V
Uzk, Resolver 2 pole |
|
| 8MSA6M.R0-E100-1 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=3000min-1,
T0=19Nm, Holding brake, keyway, connector Top
Flange 180mm j6, selfcooled, IP65, With
oil seal, 680V Uzk, Resolver 2 pole |
|
| 8MSA6S.R0-D2 |
ACOPOS Synchron Motor; Synchron Motor, 6pin, nM=3000min-1,
Mo=13,5Nm, plane shaft, connector up,
Flange 180mm j6, selfcooled, IP64,
560V Uzk, Resolver 2 pole |
|
| 8MSA6S.R0-D500-1 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=3000min-1,
T0=13,5Nm, with brake TH=32Nm, keyway,
connector up, Flange 180mm j6,
selfcooled, IP64, 680V Uzk, Resolver 2
pole |
|
| 8MSA6X.E1-D234 |
ACOPOS Synchron Motor; Synchron Motor, 6pin, nM=3000min-1,
Mo=29Nm, plane shaft, connector up,
Flansch 180mm j6, selfcooled, IP64,
560V Uzk, Geber EnDat 512 periods
multiturn. Reinforced bearing "A" side option |
|
| 8MSA7L.R0-D2 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=3000min-1,
T0=40Nm, plane shaft, connector up,
Flange 180mm j6, selfcooled, IP64, 680V
Uzk, Resolver 2 pole |
|
| 8MSA7L.R0-D3 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=3000min-1,
T0=40Nm, keyway, connector up, Flange
180mm j6, selfcooled, IP64, 680V Uzk,
Resolver 2 pole |
|
| 8MSA7S.R0-D2 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=3000min-1,
T0=26Nm, plane shaft, connector up,
Flange 180mm j6, selfcooled, IP64, 680V
Uzk, Resolver 2 pole |
|
| 8MSA8M.R0-D2 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=3000min-1,
T0=68Nm, plane shaft, connector up,
Flange 230mm j6, selfcooled, IP64, 680V
Uzk, Resolver 2 pole |
|
| 8MSA8M.R0-D3 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=3000min-1,
T0=68Nm, keyway, connector up, Flange
230mm j6, selfcooled, IP64, 680V Uzk,
Resolver 2 pole |
|
| 8MSA8S.E1-D2 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=3000min-1,
T0=40Nm, plane shaft, connector up,
Flange 230mm j6, selfcooled, IP64, 680V
Uzk, Encoder EnDat 512 periods
multiturn |
|
| 8MSA8X.R0-P1 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=2000min-1,
T0=115Nm, keyway, connector Top side,
Flange 230mm j6, selfcooled, IP64, 680V
Uzk, Resolver 2 pole |
|
| 8MSA8X.R0-P8 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=2000min-1,
T0=115Nm, with brake TH=130Nm, plane shaft, connector Top side,
Flange 230mm j6, selfcooled, IP64, 680V
Uzk, Resolver 2 pole |
|
| 8MSA8X.R0-P9 |
Drives - Synchronous Motors; Synchronous Motor, 6pole, nN=2000min-1,
T0=115Nm, with brake TH=130Nm, keyway, connector Top side,
Flange 230mm j6, selfcooled, IP64, 680V
Uzk, Resolver 2 pole |
|
| 8PE001.00-1 |
Drives - Synchronous Motors; EnDat plug 17 pin Intercontec socket,
Crimp range 17 x 0,06-1.0mm²,
for cable 9-12mm, IP67 |
|
| 8PM001.00-1 |
Drives - Synchronous Motors; Motor plug 8 pin Intercontec socket,
Crimp range
4 x 0.5-2.5mm² + 4 x 0.06-1.0mm²,
for cable 9-14mm, IP67, UL/CSA listed
|
|
| 8PR001.00-1 |
Drives - Synchronous Motors; Resolver plug 12 pin Intercontec socket,
Crimp range 12 x 0,06-1.0mm²,
for cable 5.5-10.5mm, IP67 |
|
| 8V1010.00-2 |
Drives - Power Modules; Servo drive 3 x 400-480V 1A 0.45kW,
line filter, braking resistor and
electronic secure restart inhibit
integrated |
|
| 8V1010.50-2 |
Drives - Power Modules; Servo drive 1 x 110-230V 2A 0.45kW,
line filter, braking resistor and
electronic secure restart inhibit
integrated |
|
| 8V1016.00-2 |
Drives - Power Modules; Servo drive 3 x 400-480V 1.6A 0.7kW,
line filter, braking resistor and
electronic secure restart inhibit
integrated |
|
| 8V1016.50-2 |
Drives - Power Modules; Servo drive 1 x 110-230V 3.2A 0.7kW,
line filter, braking resistor and
electronic secure restart inhibit
integrated |
|
| 8V1022.00-1 |
Drives - Power Modules; Servo drive 3 x 400-480V 2.2A 1kW,
filter and braking resistor integrated |
|
| 8V1022.00-2 |
Drives - Power Modules; Servo drive 3 x 400-480V 2.2A 1kW,
line filter, braking resistor and
electronic secure restart inhibit
integrated |
|
| 8V1022.001-2 |
Drives - Power Modules; Servo drive 3 x 400-480V 2.2A 1kW,
line filter, braking resistor and
electronic secure restart inhibit
integrated, painted |
|
| 8V1045.00-1 |
Drives - Power Modules; Servo drive 3 x 400-480V 4.4A 2kW,
filter and braking resistor integrated |
|
| 8V1045.00-2 |
Drives - Power Modules; Servo drive 3 x 400-480V 4.4A 2kW,
line filter, braking resistor and
electronic secure restart inhibit
integrated |
|
| 8V1045.001-2 |
Drives - Power Modules; Servo drive 3 x 400-480V 4.4A 2kW,
line filter, braking resistor and
electronic secure restart inhibit
integrated, painted |
|
| 8V1090.00-2 |
Drives - Power Modules; Servo drive 3 x 400-480V 8.8A 4kW,
line filter, braking resistor and
electronic secure restart inhibit
integrated |
|
| 8V1090.001-2 |
Drives - Power Modules; Servo drive 3 x 400-480V 8.8A 4kW,
line filter, braking resistor and
electronic secure restart inhibit
integrated, painted |
|
| 8V1180.00-2 |
Drives - Power Modules; Servo drive 3 x 400-480V 19A 9kW,
line filter, braking resistor, DC bus
power supply and electronic secure
restart inhibit integrated |
|
| 8V128M.00-2 |
Drives - Power Modules; Servo drive 3 x 400-480V 128A 64kW,
line filter, braking resistor, DC bus
power supply and electronic secure
restart inhibit integrated |
|
| 8V1320.00-2 |
Drives - Power Modules; Servo drive 3 x 400-480V 34A 16kW,
line filter, braking resistor, DC bus
power supply and electronic secure
restart inhibit integrated |
|
| 8V1640.00-2 |
Drives - Power Modules; Servo drive 3 x 400-480V 64A 32kW,
line filter, braking resistor, DC bus
power supply and electronic secure
restart inhibit integrated |
|
| 8X0001.00-1 |
Drives - Accessories; ACOPOS accessories, plug set for
8V1010.00 and 8V1090.00 (3 phase) |
|
| 99900018 |
Misc; Pre-Installation IPC/APC/AP |
|
| 9A0001.03 |
PROVIT General - Accessories; Power Cable for IPC 5000/5600
length 2 m, for German wall socket |
|
| 9A0001.06 |
PROVIT General - Accessories; AC power plug (spare part; 5 pieces)
for Provit 5000/5600 controller |
|
| 9A0003.01 |
Dallas KeyRing Hardware Security Key; |
|
| 9A0003.02 |
PROVIT General - Accessories; Dallas Keyring Adapter DS1410E
to use Dallas Dongle on a parallel
PC interface |
|
| 9A0003.02U |
PROVIT General - Accessories; Dallas Keyring Adapter DS1410E
to use Dallas Dongle on USB
PC interface |
|
| 9A0004.03 |
PS/2 SIMM 4 MB; 1MBx32 (72pin) |
|
| 9A0004.04 |
PS/2 SIMM 16 MB; 4MBx32 (72pin) |
|
| 9A0004.06 |
PS/2 SIMM 32 MB; 8MBx32 (72pin) |
|
| 9A0004.11 |
PROVIT General - Accessories; DIMM module 64 MB PC100 CL2 |
|
| 9A0004.12 |
PROVIT General - Accessories; DIMM module 128 MB PC100 CL2 |
|
| 9A0004.14 |
PROVIT General - Accessories; DIMM module 256 MB PC100 CL2 |
|
| 9A0009.03 |
PCCARD Flash 20 MB; ATA/True IDE |
|
| 9A0010.02 |
PCI UltraSCSI Adapter; AHA-2940AU |
|
| 9A0014.10 |
PROVIT General - Accessories; RS232 extension cable
for remote operating of a display unit
with touch screen, length 10 m. |
|
| 9A0015.05 |
Compact Flash 128 MB; ATA/True IDE |
|
| 9A0015.06 |
Compact Flash 32 MB; ATA/True IDE |
|
| 9A0015.07 |
Compact Flash 8 MB; ATA/True IDE |
|
| 9A0015.08 |
Compact Flash 192 MB; ATA/True IDE |
|
| 9A0017.02 |
PROVIT General - Accessories; Null Modem Cable RS232 1.8 m
To connect UPS and IPC (9 pin
D-type socket - 9 pin D-type socket) |
|
| 9A0017.03 |
PROVIT General - Accessories; Null Modem Cable RS232 8.0 m
To connect UPS and IPC (9 pin
D-type socket - 9 pin D-type socket) |
|
| 9A0017.04 |
PROVIT General - Accessories; Null Modem Cable RS232 12.0 m
To connect UPS and IPC (9 pin
D-type socket - 9 pin D-type socket) |
|
| 9A0017.0A |
PROVIT General - Accessories; Null Modem Cable RS232 3.0 m
To connect UPS and IPC (9 pin
D-type socket - 9 pin D-type socket) |
|
| 9A0100.11 |
PROVIT General - Accessories; UPS 24 VDC
24 VDC input, 24 VDC output; serial
interface. |
|
| 9A0100.12 |
PROVIT General - Accessories; UPS Battery Unit Type A
24 V; 7 Ah; incl. battery cage. |
|
| 9A0100.14 |
PROVIT General - Accessories; UPS Battery Unit Type B
24 V; 2,2 Ah; incl. battery cage. |
|
| 9A0110.03 |
PROVIT General - Accessories; Backlight (spare part)
for Hosiden HLD1209;
for display units (revisions):
5D5601.01 (A0-D0); 5D5601.02 (A0-D0);
5D5601.03 (A0-D0). |
|
| 9A0110.04 |
PROVIT General - Accessories; Backlight (spare part)
for Sharp LM64P83L; for
5D2000.04 (from rev. 21.00);
5D2300.03 (from rev. 02.00);
5D2500.01 (from rev. 04.00);
5D2510.01;
5D4000.04 (from rev. 22.18) |
|
| 9A0110.05 |
PROVIT General - Accessories; Backlight (spare part)
for Sharp LQ10D367;
5D2000.03 from rev. 03.00;
5D2200.01 from rev. 21.00 to D0;
5D2210.01 from rev. A0 to D0;
5D2300.01 from rev. 21.00;
5D2500.10 all rev.;
5D4000.09 all rev.;
5D5000.03 from rev. 10.05 |
|
| 9A0110.06 |
PROVIT General - Accessories; Backlight (spare part)
for Sharp LQ10S21;
5D5201.02 rev. all;
5D5211.02 rev. A0-F0;
5D5501.01 rev. all. |
|
| 9A0110.09 |
PROVIT General - Accessories; Backlight (spare part)
for Samsung LT121S1; for
5D5201.03 rev. all;
5D5211.03 rev. A0-E0. |
|
| 9A0110.10 |
PROVIT General - Accessories; Backlight (spare part)
für Sharp LQ150X1DG11; for
for 5D5212.02 and 5D5212.04. |
|
| 9A0110.22 |
PROVIT General - Accessories; Backlight (spare part)
for 15" SHARP LQ150X1LW71N screen.Backlight (spare part) Models:4PP120.1505-31 From revision S0,4PP151.1505-31 From revision H0,4PP180.1505-31 From revision I0,4PP181.1505-31 From revision H0,4PP220.150 |
|
| 9A0110.25 |
PROVIT General - Accessories; Backlight (spare part)
for 15" AUO G150XG01 V1 screen:
5AP920.1505-K16 from Revision K0 |
|
| 9S0000.09-090 |
PROVIT General - PC Operatingsystems; OEM MS-Windows XP professional CD multilenguage. Only available with a new PC. |
|
| 9S0001.02-090 |
PROVIT General - PC Operatingsystems; OEM MS-Windows CE
incl. License Label and Security Key |
|
| 9S0001.25-020 |
PROVIT General - PC Operatingsystems; OEM Microsoft Windows XP embedded SP2. For PP120 BIOS; English; preinstalled on 256Mb CompactFlash card. |
|
| 9S0001.28-020 |
PROVIT General - PC Operatingsystems; OEM Microsoft Windows XP embedded SP2. For APC620 and Panel PC with Intel 855GME chipset; English; preinstalled on 512Mb CompactFlash card. |
|
| AB-3 |
IX; Battery for IX-NNN-25,35,50,60,70,80 |
|
| AB-5 |
RCS2; Battery for SCON / SSEL controller |
|
| AB-5-CS |
RCS2; Battery for SCON / SSEL controller with plastic holder |
|
| AC01-RJ45/Df-2.5-RS1 |
; Adapter cable for B1100, E1100 and E1001 drivers Sub-D 9 - RJ45 |
|
| ACON-C-20ILA-PN-2-0 |
ACON; Position controller for RCA series (Category A1); Standard type; 20 Actuator; Incremental encoder; Power saving; PNP type PIO; 2Mt I/O cable standard; 24 V DC Power supply |
|
| ACON-C-30I-PN-2-0 |
ACON; Position controler for RCA series |
|
| ACON-CA-10I-PN-2-0 |
ACON; Position controller for RCA / RCA2 series, category A5, 10w Actuator, Incremental encoder, I/O PNP |
|
| ACON-CA-10ILA-EC-0-0 |
; Position controller for servo motors , A5; Standard type; 10 W motor - compatible; Incremental encoder; EtherCat I/O type; No Cable; Power Dc 24 V; Power saving |
|
| ACON-CA-20I-PN-2-0 |
ACON; Position controller for RCA series,safety category |
|
| ACON-CA-30I-PN-2-0 |
ACON; Position controller for RCA series,safety category |
|
| ACON-CB-30WAI-PN-2-0 |
ACON; Position controller for 24V servo motors , A5; Standard type; 30W motor compatible; Battery less absolute / Incremental encoder; PNP type PIO; 2m I/O cable standard; Power 24 Vdc |
|
| ACON-CG-10IPN-5-0 |
ACON; Position controler for RCA series,safety category |
|
| ACON-CG-20I-PN-2-0 |
ACON; Position controler for RCA series,sagety category |
|
| ACON-CG-20ILA-PN-2-0 |
ACON; Position controller for RCA2 series (Category A1); Safety type; 20 Actuator; Incremental encoder; Power saving; PNP type PIO; 2Mt I/O cable standard; 24 V DC Power supply |
|
| ACON-CG-30I-PN-2-0 |
ACON; Position controller for RCA series (Category A1); Safety type; 30 Actuator; Incremental encoder; PNP type PIO; 2Mt I/O cable standard; 24 V DC Power supply |
|
| ACON-CG-30ILA-PN-2-0 |
ACON; Position controller for RCA series (Category A1); Safety type; 30 Actuator; Incremental encoder; Power saving; PNP type PIO; 2Mt I/O cable standard; 24 V DC Power supply |
|
| ACOPLA-6-6 |
Acoplamiento; Acoplamiento Baumann ZG 25 x 12 con dos nucleos 12x6 |
|
| AEGA052MR04000012000 |
Connector "A" series; Signal receptacle Nickel Plated 12 way. Insert P,straight version, including male crimp contacts 1mm and antivibration O-ring |
|
| AEWD052MR04000014000 |
Connector "A" series; Signal receptacle black chromiun 12 way. Insert P, angle version, including male crimp contacts 1mm and antivibration O-ring |
|
| AEWD113MR040000 |
Connector "A" series; Signal receptacle black chromiun 17 way. Insert E, angle version, including male crimp contacts 1mm and antivibration O-ring |
|
| AGS102-16G |
; 16 G Msata |
|
| AGS102-I50M-8G |
; AGS) Gateway system, fanless design with Intel Atom x7-E3950 QC SoC (1.6GHz/2.0GHz) onboard, w/o memory, mSATA device, Power adaptor, w/ Wall & Din-rail mounting brackets, 4-in & 4-out isolation GPIO (RoHS) |
|
| AKD-P02407-NBCC-E000 |
AKD drive; AKD P02407 servodrive, 400Vac, 24Arms continuous current 16Kw continuous output current. |
|
| AKM74L-ANC2R-00 |
AKM motor; AKM74L servomotor, 400Vac, 180mm flange, 49.7Nm constant torque, 144Nm peak torque, 1200rpm rated speed, smooth shaft, motor-mounted rotatable IP65 connectors, 24Vdc brake 53Nm static torque, resolver, without shaft seal. |
|
| AMI300-9EF |
Industrial PC; Aluminum System with MI910EF, Intel® T7500 (2.2GHz) CPU, 2GB DDR2, slim DVD COMBO,2.5” 80GB HDD, ID392 DVI Board, 110W DCDC Converter, 80W 12 Vdc Power Adaptor |
|
| AMI300-power-adapt |
; Power adaptor, 240 Vac 80 W output 12 VDC |
|
| AMPLIBOX-4-CARD |
HELPRO Amplibox for 4 channel; Only Card |
|
| ASEL-C-1-20-I-PN-0-0 |
ASEL; Program controller for RCA series |
|
| ASEL-C-2-30I-30I-PN-2-0 |
ASEL; Program controller for RCA2/RCA/RCL; Standard; 2-axis model; Incremental; PIO PNP 2 Mts cable (standard); DC24V |
|
| ASEL-C-2-30IH-30IB-PN-3-0 |
ASEL; Program controller for RCA series for 2 axes |
|
| ASEL-C-2-30IHLA-30IB-PN-2-0 |
ASEL; Program controller for RCA series for 2 axes |
|
| ASEP-C-20-I-PN-2-0 |
ASEP; Position controller for RCA series (Category A3); Standard type; 20 Actuator; Incremental encoder; PNP type PIO; 2Mt I/O cable standard; 24 V DC Power supply |
|
| AWX32MMX-LITE V92 |
AlarmWorX32 MultiMedia Alarming Version 9.2; AlarmWorX32 MultiMedia Alarming, Lite version, including: E-mail, Remote Paging, SMS |
|
| AWX64MMX-LITE V10 |
AlarmWorX64 MultiMedia Alarming Version 10; AlarmWorX64 MultiMedia Alarming, Lite version, including: E-mail, Remote Paging, SMS |
|
| B0027630 |
Remplacement; Mounting clamps |
|
| B0027899-03 |
; |
|
| B1100-GP |
LINMOT B1100; Servo Controller General Purpose, 72V/8A |
|
| B1100-GP-HC |
LINMOT B1100; Servo Controller General Purpose, 72V/15A |
|
| B1100-GP-XC |
LINMOT B1100; Servo Controller General Purpose, 72V/25A |
|
| B1100-PP-HC |
LINMOT B1100; Servo Controller Point to Point, 72V/15A |
|
| B1100-VF-XC |
LINMOT B1100; Servo Controller Force Velocity, 72V/25A |
|
| B1150-ML |
LINMOT B1150; Servo Controller General Purpose for Ethernet based Multi Axes System, 72V/8A |
|
| B8050-ML-PL |
LINMOT B8050; Ethernet Bus Module for Servo Controller General Purpose Multi Axes System, PowerLink |
|
| BA006LFE01C01 |
; Kawasaki arc welding robot, 6 axes
payload 6kg
horizontal reach 2036mm
vertical reach 3632mm
repeatability +/-0.08mm
floor, ceiling mounting
controller E01 |
|
| BA006NFE01C01 |
; Kawasaki arc welding robot, 6 axes
payload 6kg
horizontal reach 1445mm
vertical reach 2487mm
repeatability +/-0.06mm
floor, ceiling mounting
controller E01 |
|
| BEWD089MR13000002000 |
Connector "B" series; Power receptacle black chromiun size 1, 8 -way, angle version, including 4 x 1mm and 4 x 2mm male crimp contacts and antivibration O-ring |
|
| BRARCIF-0T |
Midi/M264/Multicontrol - Communication Modules; MINI/MULTI application memory
Combination of ARCNET interface and
EEPROM/RAM application memory
For type A CPUs, 16 KB EEPROM
16 KByte SRAM for 4.7 KB instructions
Linking to a twisted pair ARCNET
network |
|
| BRCOMP1-0 |
Compact - PLC; Compact PLC
24 VDC supply, 6.5 W without panel
16 KByte EEPROM
16 KByte SRAM for 4.7 KB instructions
16 KByte EEPROM expansion memory
16 digital inputs, 24 VDC, 2 msec, sink
4 of which are counter inputs: 20 kHz
14 transistor outputs, 24 VD |
|
| BRCOMP2-0 |
Compact - PLC; Compact PLC
24 VDC supply, 6.5 W without panel
16 KByte EEPROM
16 KByte SRAM for 4.7 KB instructions
16 KByte EEPROM expansion memory
16 digital inputs, 24 VDC, 2 msec, sink
4 of which are counter inputs: 20 kHz
14 transistor outputs, 24 VD |
|
| BRCOMP:1-1 |
Compact control system set; Varaint 1-1 including BRCOMP1-0, BRTB0218-0 |
|
| BRHA08-0 |
Accessories Compact/Mini/M264/Multi - Hardware; TRIAC - OUTPUT MODULE (F
OR HEATING CONTROL) |
|
| BRHIEC-0 |
Accessories Compact/Mini/M264/Multi - Hardware; HIEC-HEATING CONTROL |
|
| BRHVCB-0 |
VOLTAGE CONTROL BOARD (FOR HEATING CONTROL); |
|
| BRIFPC-0 |
B&R System Software Compact/Midi/M264/Multi - Miscellaneous; ISA online interface module
ISA card with two online interfaces for
simultanious online connection of two
PLC processors
Order online cable separately! |
|
| BRINKO-0 |
BUS-COUPLER RS485 INET; |
|
| BRKA30-0 |
Accessories Compact/Mini/M264/Multi - Hardware; Data cable, length: 2.5 m
From MAESTRO, MCOHDD, PNC8
to
Floppy disk station MFDD700,
D-type adapter BRADPNC8E-0 |
|
| BRKAOL-0 |
Accessories Compact/Mini/M264/Multi - Hardware; Online cable, length: 2.5 m
From online interface module BRIFPC-0
to all CPUs and PPs |
|
| BRKAOL5-1 |
Accessories Compact/Mini/M264/Multi - Hardware; Centronics/online converter
Online operation via the PC parallel
interface, including online cable
When using battery operated notebooks,
the converter voltage (8 - 30 VDC) must
be supplied separately |
|
| BRLITB-0 |
Midi/M264/Multicontrol - Accessories; Lithium battery 3.6 V |
|
| BRMCR016-0 |
ACCESS. MEMORY CARD 16; KB RAM |
|
| BRMCR032-0 |
Accessories Compact/Mini/M264/Multi - Hardware; BRMEC memory card, 32 KByte SRAM |
|
| BRMEC-0 |
Accessories Compact/Mini/M264/Multi - Hardware; BRMEC mass storage device
For memory cards (type BN)
1 RS232/RS485/RS422 interface
RS485: elec. isolated, network-capable
1 RS232/TTY interface
TTY: with electrically isolated receiver
Standard housing DIN 4 |
|
| BRRT28-3 |
Operator Panels and Accessories - Panels; BRRT28 operator panel
2 line back lit LC display
2 x 20 characters
Character height: 5.0 mm
28 keys, 1 RS485 interface
Electrically isolated, network-capable
IP54 protection (from front) with glued
membrane front
|
|
| BRRT36-0 |
OPERATING PANEL W.POWER; SUPPLY 2X16 DISP,35 KEYS, TTY |
|
| BRRT360-0 |
OPERATOR PANEL; 2x16 DISP, 36 KEYS, TT |
|
| BRRTBL-0 |
METAL FACE PLATE FOR MIN; I-OPERATOR PANEL 5MM |
|
| BRRTFO-6 |
Operator Panels and Accessories - Accessories; OVERLAY STANDARD FOR BRR
T28 |
|
| BRRTGR31-0 |
Operator Panels and Accessories - Panels; BRRTGR31 operator panel
LC display, full graphic, monochrome
16 shades of grey, 16 x 26 characters
128 x 160 pixel, background lighting
31 keys, 19 of which have LEDs
8 KB FlashPROM
1 TTY interface
1 RS232/RS485 i |
|
| BRRTGR31-0F |
Operator Panels and Accessories - Panels; OPERATOR PANEL WITHOUT
MYLAR, GRAPHIC LCD-CFL |
|
| BRRTM1-0 |
MINI OPERATOR PANEL,; 1x16 DISP, 24 KEYS |
|
| BRRTM3-0 |
Operator Panels and Accessories - Panels; MINICONTROL operator panel
16 character self lit fluorescent
display, character height: 5.0 mm
24 keys, 12 of which have LEDs
Interface: PATA specific
IP54 protection (from front)
Legend strips
Without interface m |
|
| BRRTMCO-1 |
Operator Panels and Accessories - Panels; MINI OPERATING PANEL WIT
H 5MM DISPLAY PATA2/1 |
|
| BRTMCOset |
Minitableau set; Panel Minicontrol, includig: BRRTMCO-1, 4 Pcs.C00225881, 4 Pcs.C0025955, 7 Pcs.C0027038, C0027146 |
|
| BRXTGR31-0 |
OPERATOR PANEL INTELL.; with extended processo |
|
| BRXTGR31-0MW |
OPERATOR PANEL INTELL.; with extended processo |
|
| BSS06-06 |
Giunto BBS 0606 6-6; |
|
| BT200LFE02 |
; Kawasaki spot welding / general purpose robot, 6 axes
payload 200kg
hollow wrist
horizontal reach 3151mm
vertical reach 4844mm
repeatability +/-0.08mm
shelf mounting
controller E02 universal |
|
| BX100NFE02 |
; Kawasaki spot welding / general purpose robot, 6 axes
payload 100kg
horizontal reach 2200mm
vertical reach 3560mm
repeatability +/-0.06mm
floor mounting
controller E02 universal |
|
| BX200LFE02 |
; Kawasaki spot welding / general purpose robot, 6 axes
payload 200kg
horizontal reach 2597mm
vertical reach 3420mm
repeatability +/-0.06mm
floor mounting
controller E02 universal |
|
| BX200XFE02 |
; Kawasaki spot welding / general purpose robot, 6 axes
payload 200kg
horizontal reach 3412mm
vertical reach 4734mm
repeatability +/-0.07mm
floor mounting
controller E02 universal |
|
| BX250LFE02 |
; Kawasaki spot welding / general purpose robot, 6 axes
payload 250kg
horizontal reach 2812mm
vertical reach 3536mm
repeatability +/-0.07mm
floor mounting
controller E02 universal |
|
| C0030472-03 |
Remplacement; Front for 4PP420 |
|
| C0116204 |
Remplacement; FIP module FUTABA 16-SY-11G Reemplacement for BRRTM1-0 |
|
| C0118004 |
Remplacement; Relays for Minicontrol out module MCA 12A , GOOD SKY UDH-SH-124D or TAKAMISAWA LZ-24H-K |
|
| C1100-GP-XC-0S-000 |
LINMOT C1100; General Purpose Drive (72VDC/25) |
|
| C1100-GP-XC-1S-000 |
LINMOT C1100; General Purpose Drive (72VDC/25/STO) |
|
| C1150-DS-XC-0S-000 |
LINMOT C1150; EtherCAT CoE Drive (72VDC/25A) |
|
| C1150-DS-XC-1S-000 |
LINMOT C1150; EtherCAT CoE Drive (72VDC/25A/STO) |
|
| C1150-EC-XC-0S-000 |
LINMOT C1150; EtherCAT Drive (72VDC/25A) |
|
| C1150-EC-XC-1S-000 |
LINMOT C1150; EtherCAT Drive (72VDC/25A/STO) |
|
| C1150-PN-XC-0S-000 |
LINMOT C1150; ProfiNet Drive (72VDC/25) |
|
| C1150-PN-XC-1S-000 |
LINMOT C1150; ProfiNet Drive (72VDC/25/STO) |
|
| C1250-DS-XC-0S-000 |
LINMOT C1200; EtherCAT CoE Drive (72VDC/25A) |
|
| C1250-DS-XC-1S-000 |
LINMOT C1200; EtherCAT CoE Drive (72VDC/25A/STO) |
|
| C1250-EC-XC-0S-000 |
LINMOT C1200; EtherCAT Drive (72VDC/25A) |
|
| C1250-EC-XC-1S-000 |
LINMOT C1200; EtherCAT Drive (72VDC/25A/STO) |
|
| C1250-IP-XC-0S-000 |
LINMOT C1200; Ethernet IP Drive (72VDC/25A) |
|
| C1250-IP-XC-1S-000 |
LINMOT C1200; Ethernet IP Drive (72VDC/25A/STO) |
|
| C1250-LU-XC-0S-000 |
LINMOT C1200; Ethernet LinUDP Drive (72VDC/25A) |
|
| C1250-PD-XC-1S-000 |
LINMOT C1200; ProfiDrive Drive (72VDC/25A/STO) |
|
| C1250-PN-XC-0S-000 |
LINMOT C1200; ProfiNet Drive (72VDC/25A) |
|
| C1250-PN-XC-1S-000 |
LINMOT C1200; ProfiNet Drive (72VDC/25A/STO) |
|
| C1250-SE-XC-1S-000 |
LINMOT C1200; Servo Drive Profile over EtherCat SoE (72VDC/25A/STO) |
|
| CA4-CLACE-NA00 |
Client ACE; OPC.net ToolKit |
|
| CAH-LOD26-03 |
CA series Cable; CA series cylinder linear actuator lo LAC 1, 3 Mts cable |
|
| CAL36-015-75-2-M-3 |
CA series; Linear cylinder actuator, 36 mm dia, 15mm stroke, 48 Volts,Double coil, 5micron encoder male rod |
|
| CAL75-015-71M5 |
CA series; Linear cylinder actuator, 75 mm dia, 15mm stroke, 48 Volts, singel coil, 1micron encoder |
|
| CAN-RJ-003 cable set |
Cable; CANopen RJ Cable Set for LCC-10 controller (includes 2x RJ 6p6c 0.3m, one-on-one cable (RJ25, Gray, 30cm length, 6 wires) and 1x end-resistance (120 ohm) in a RJ plug) |
|
| Capacitor 10'000uF/100V |
LINMOT; Capacitor 10'000uF/100V |
|
| CB-ACS-MPA030 |
CB; Standard motor cable type 3m. RCA2 |
|
| CB-APSEP-MPA050 |
CB; Integrated motor-encoder standard cable RCP3, 5m
Categoría estándar, apto para cadena portacables
Motor - encóder integrado
Longitud 5m |
|
| CB-APSEP-MPA100 |
CB; Integrated motor-encoder standard cable RCP3, 10m
Categoría estándar, apto para cadena portacables
Motor - encóder integrado
Longitud 5m |
|
| CB-ASEP2-MPA030 |
CB; Integrated motor-encoder robot cable, 3m
Categoría robot, apto para cadena portacables
Motor - encóder integrado
Longitud 3m |
|
| CB-CA-MPA030 |
CB; Integrated motor-encoder standard cable RCP4, 3m |
|
| CB-CA-MPA050 |
CB; Integrated motor-encoder standard cable RCP4, 5m |
|
| CB-CA-MPA050-RB |
CB; Integrated motor-encoder standard cable RCP4, 5m, robot cable |
|
| CB-CA-MPA100 |
CB; Integrated motor-encoder standard cable RCP4, 10m |
|
| CB-CAN-MPA030 |
CB; Integrated motor-encoder standard cable, 3m |
|
| CB-CAN-MPA030-RB |
CB; Integrated motor-encoder robot cable, 3m |
|
| CB-CAN-MPA050 |
CB; Integrated motor-encoder standard cable, 5m |
|
| CB-CAN-MPA050-RB |
CB; Integrated motor-encoder robot cable, 5m |
|
| CB-CAN-MPA100 |
CB; Integrated motor-encoder standard cable, 10m |
|
| CB-CAN-MPA100-RB |
CB; Integrated motor-encoder robot cable, 10m |
|
| CB-CAN-MPA150 |
CB; Integrated motor-encoder standard cable, 15m |
|
| CB-CAN-MPA200-RB |
CB; Integrated motor-encoder robot cable, 20m |
|
| CB-CFA3-MPA050 |
CB; Integrated motor-encoder standard cable, 5m |
|
| CB-CFA3-MPA100 |
CB; Integrated motor-encoder standard cable, 10m |
|
| CB-DS-PIO030 |
Cables IAI; I/O Cables SEL controllers 3m |
|
| CB-EC-PWBIO010-RB |
EC; Cable ELECYLINDER CB-EC-PWBIO010-RB |
|
| CB-EC-PWBIO030-RB |
EC; Cable ELECYLINDER CB-EC-PWBIO030-RB |
|
| CB-EC-PWBIO050-RB |
EC; Cable ELECYLINDER CB-EC-PWBIO050-RB |
|
| CB-MODBUS-1x5+3x0.3(1H+4M) |
CB; |
|
| CB-MODBUS-6-0.3 |
; |
|
| CB-MODBUS-IF-IAI |
Programming device; Interface for IAI CON controllers comunication |
|
| CB-PAC-PIO020 |
Cables IAI; I/O Cables PCON/SCON 2m |
|
| CB-PAC-PIO050 |
Cables IAI; I/O Cables PCON/SCON 5m |
|
| CB-PACY-PIO020 |
Cables IAI; I/O Cables PCON/SCON CY (solenoid) 2m |
|
| CB-PCS-MPA030 |
CB; Standard motor cable type 3m. RCP3 |
|
| CB-PCS-MPA050 |
CB; Standard motor cable type 5m. RCP3 |
|
| CB-PSEP-MPA030 |
CB; Standard motor cable type 3m. For RCP2 controller type P3 |
|
| CB-PSEP-MPA050 |
CB; Standard motor cable type 5m. For RCP2 controller type P3 |
|
| CB-PSEP-MPA100 |
CB; Standard motor cable type 10m. For RCP2 controller type P3 |
|
| CB-RCA-SIO050 |
Programming device; Comunication cable for CON, SEP controllers (5 Mts) |
|
| CB-RCB-CTL002 |
CB; Controller link cable |
|
| CB-RCC-MA030 |
CB; Standard motor cable type 3m, for RCS2 |
|
| CB-RCC-MA030-RB |
CB; Robot motor cable type 3m. RCS2 |
|
| CB-RCC-MA050 |
CB; Standard motor cable type 5m, for RCS2 |
|
| CB-RCC-MA050-RB |
CB; Robot motor cable type 5m, for RCS2 |
|
| CB-RCC-MA100 |
CB; Standard motor cable type 10m, for RCS2 |
|
| CB-RCC-MA100-RB |
CB; Robot motor cable type 10m, for RCS2 |
|
| CB-RCP2-MA030 |
CB; Standard motor cable type 3m. RCP2 |
|
| CB-RCP2-MA050 |
CB; Standard motor cable type 5M |
|
| CB-RCP2-MA100 |
CB; Standard motor cable type 10m. RCP2 |
|
| CB-RCP2-MA150 |
CB; Standard motor cable type 15m. RCP2 |
|
| CB-RCP2-PA050 |
CB; Standard encoder cable type 5M |
|
| CB-RCP2-PB030 |
CB; Standard encoder cable type 3m., RCP2 |
|
| CB-RCP2-PB050 |
CB; Standard encoder cable type 5m., RCP2 |
|
| CB-RCP2-PB100 |
CB; Standard encoder cable type 10m., RCP2 |
|
| CB-RCP2-PB150 |
CB; Standard encoder cable type 15m., RCP2 |
|
| CB-RCP4-RA6C-MPA-AS |
; Actuador PigTail Cable assembly |
|
| CB-RCS2-PA030 |
CB; Encoder Cable (RCS2/non-Robot/Plastic-Connector) T2 controller, 3m |
|
| CB-RCS2-PA050 |
CB; Encoder Cable (RCS2/non-Robot/Plastic-Connector) T2 controller, 5m |
|
| CB-RCS2-PA100 |
CB; Encoder Cable (RCS2/non-Robot/Plastic-Connector) T2 controller, 10m |
|
| CB-RCS2-PLA050 |
CB; Encoder Cable (RCS2_RT/non-Robot/Plastic-Connector) T2 controller, 5m |
|
| CB-RCS2-PLA100 |
CB; Encoder Cable (RCS2_RT/non-Robot/Plastic-Connector) T2 controller, 10m |
|
| CB-SC-PIOS-030 |
; 3 Mts Cable for SCON pulse train/encoder out option |
|
| CB-SC-STO030 |
CB; STO/SS safety option cable, 3m |
|
| CB-SEL-SJ002 |
CB; Converter cable, for interconnect teching device or PC to PSEL, ASEL, SSEL controllers |
|
| CB-SEL-SJS002 |
CB; Converter cable, for interconnect teching device or PC to PSEL, ASEL, SSEL controllers (CS) |
|
| CB-SEL-USB030 |
Programming device; USB cable 3 Mts |
|
| CB-ST-9-25-Q |
CB; PC cable (5 Mts) RS232C |
|
| CB-ST-A2MW050-EB |
CB; PC cable (5 Mts) RS232C Xsel-Q/QX with emergency button |
|
| CB-TB3-C050 |
; Connection cable to connect TB03 to xCON controller |
|
| CB-X1-PA030 |
CB; Encoder cable Robot type 3m (RCS4, RCS3) |
|
| CB-X2-PLA100 |
CB; Encoder cable Robot type 10 m (RCS2-RT) |
|
| CB-X2-PLA50 |
CB; Encoder cable Robot type 5 m (RCS2-RT) |
|
| CB-X3-PA030 |
CB; Encoder cable Robot type 3 m (RCS2,LSA,NS, ISDAR) |
|
| CB-X3-PA050 |
CB; Encoder cable Robot type 5 m (RCS2,LSA,NS, ISDAR) |
|
| CB-X3-PA100 |
CB; Encoder cable Robot type 10 m (RCS2,LSA,NS, ISDAR) |
|
| CB-XEU-MA050 |
CB; Motor Cable (T1,T2 / EU Connector / 5m) |
|
| CB-XEU-MA100 |
CB; Motor Cable (T1,T2 / EU Connector / 10m) |
|
| CB-XEU-MA150 |
CB; Motor Cable (T1,T2 / EU Connector / 15m) |
|
| CB-XEU-MA250 |
CB; Motor Cable (T1,T2 / EU Connector / 25m) |
|
| CB-XEU-PA050 |
CB; Standard encoder cable type 5 m. ISDACR T1 controller |
|
| CB-XEU1-PA050 |
CB; Standard encoder cable type 5 m. ISDACR |
|
| CB-XEU1-PA100 |
CB; Standard encoder cable type 10 m. ISDACR |
|
| CB-XEU1-PA150 |
CB; Standard encoder cable type 15 m. ISDACR |
|
| CB-XEU1-PA250 |
CB; Standard encoder cable type 25 m. ISDACR |
|
| CB-XEU1-PLA050 |
CB; Encoder LS Cable EU Connector 5m, for IA, ISDAR |
|
| CB-XEU2-PLA100 |
CB; Encoder LS Cable EU Connector 10m, for IA, ISDAR |
|
| CB-XEU3-PA100 |
CB; Encoder Cable (RCS2,LSA,NS / EU Connector / 10m) |
|
| CBL-ATEN |
UPS station; USB to serial RS232 converter UC232A |
|
| CBL-T2USB485-M8-006 |
Tritex II Cables and Accesories; PC to TRITEX comunication cable USB/485 to M8, 6 Ft |
|
| CE-MSEL-4 |
CE conformity; For 4 axis 100 & 220V. Including 4 x E04SR4019 E04SR401938 (Seiwa) and 5 ZCAT3035-ZCAT3035-1330 (TDK) |
|
| CE-MSELPGX-3 |
CE conformity; For 3 axes Scara Robot 100 & 220V. Including 1 x NF2010A-IP noise filter, 1 x RAV-781BWZ-2A surge protector, 6 x E04SR401938 clamp filter A |
|
| CE-MSELPGX-4 |
CE conformity; For 4 axes Scara Robot 100 & 220V. Including 1 x NF2010A-IP noise filter, 1 x RAV-781BWZ-2A surge protector, 6 x E04SR401938 clamp filter A, 2 x ZCAT3035-1330 clamp filter B |
|
| CE-PCON-2 |
CE conformity; CE conformity set for RCP2 |
|
| CE-PCON-3/4/5/6 |
CE conformity; Kit conformidad CE-PCON
Filtros, ferritas y protectores de transitorios
Para controlador PCON de actuadores RCP3 / RCP4 (CR/W) / RCP5 / RCP6 |
|
| CE-SCON |
CE conformity; CE conformity set (applicable to all SCON 100/200V) |
|
| CE-SSEL-200-2 |
CE conformity; For SSEL 2 axis 220V. Including 1 x MC1210, 7xZCAT3035-1330, 1xRAV-781BWZ-2A |
|
| CE-XSELRAXSAX-4 |
CE conformity; For 4 axes Scara Robot 3x200V. Including 1 x TAC-20-683 power line filter, 1 x ESD-R-25 ferrite, 1 x RFC-H13 ferrite, 1 x RAV-781BXZ-4 surge protector, 7 x E04SR401938 clamp filter A, 8 x ZCAT3035-1330 clamp filter B |
|
| CFR0A1-002-005-00 |
AKM resolver cable; AKM resolver cable, 5m |
|
| CFSU001GB-I |
Compact Flash; Compact Flash AFAYA 1GB |
|
| CFSU002GB |
Compact Flash; Compact Flash AFAYA 2GB |
|
| CIF50-PB |
1.050.0400; Communication Interface PCI PROFIBUS-DP/FMS-Master |
|
| CM12A1-015-005-00 |
AKM motor cable; AKM motor cable, with brake, 5m |
|
| CM132H20-S03.04 |
CM132 Posizionatore; |
|
| CM140AAN1P-S4004-220 |
CM140 Posizionatore 1/2/3 assi con PLC integrato; 220Vac |
|
| CM50-4-110 |
CM 50 visualizzato a preselezione con ZR 11 4 Cifr; Alimentazione: 110 V |
|
| CM66-4 |
Decontante bidirezionale con rallentamento frontale, 4 cifre; Display mm 8,dimensioni custodia mm 72x72x141 |
|
| CM71H1-S31 |
Contatore CM 72, Lettore quota con TX seriale su comando esterno; |
|
| CM72NH3A2-S2 |
Contatore CM72, Ingr.anal., 4 relè, mag.9 quote richiam.da tastiera; |
|
| CM73NH1-S28 |
Contatore CM 73, Asse assoluto, 1 sola preselezione; |
|
| CM76H1-24-SW2103 |
Contatore/Posizionatore CM76, Software standard uscita ON/OFF, Load sullo stato; Alimentazione 24Ca |
|
| CM76H2 SW22.03E1 |
Contatore/Posizionatore CM76, Software, load sullo stato; Alimentazione 110/220 |
|
| CM76H2-220-SW22.12E1 |
Contatore/Posizionatore CM76, Uscita analogica ±10V o 0÷10V + relè direzione e gestione zero encoder; Alimentazione 110/220 |
|
| CM76H2-220-SW22.40 |
Contatore/Posizionatore CM76, Uscita anal. +/-10V oppure 0-10V+ relè di direzione, pre-fine; Alimentazione 110/220 |
|
| CM76H2-220-SW22.40E1 |
Contatore/Posizionatore CM76, Uscita anal. +/-10V oppure 0-10V+ relè di direzione, pre-fine; Alimentazione 110/220 |
|
| CM76H2-RX-SW22.22E1 |
Contatore/Posizionatore CM76, Software standard uscita analogica ±10V o 0÷10V + relè direzione, con interfaccia seriale RS232; Alimentazione 110/220 |
|
| CM76H2A2-SC7053.E1 |
Contatore/Posizionatore CM76,; Alimentazione 24V-50/60Hz |
|
| CM78H1-S001-24 |
CM78 Contatore a microprocessore - due preselezioni impostabili; |
|
| CM78H1-S017-110 |
CM78 Visualizzatore - relativo/assoluto da tastiera - unità di misura da ingresso - 2 soglie impostabili; |
|
| CM78H1-S041-110 |
CM78 Contatore a microprocessore - due preselezioni impostabili con 'range' fattore correttivo da 0,1 a 9,99999, P2 con chiave, 110 Vac; |
|
| CM78H1-S041-220 |
CM78 Contatore a microprocessore - due preselezioni impostabili con 'range' fattore correttivo da 0,1 a 9,99999, P2 con chiave, 220 Vac; |
|
| CM78H1-S041-24 |
CM78 Contatore a microprocessore - due preselezioni impostabili con 'range' fattore correttivo da 0,1 a 9,99999, P2 con chiave, 24 Vac; |
|
| CM78H1N-S001N-220 |
CM78 Contatore a microprocessore - due preselezioni impostabili; |
|
| CM78H1N-S001N-24 |
CM78 Visualizzatore a microprocessore - due soglie impostabili; |
|
| CM78H1N-S002N-220 |
CM78 Visualizzatore a microprocessore - due soglie impostabili; |
|
| CM78H1N-S006N-110 |
CM78 Contatore a microprocessore - due preselezioni impostabili con 'range' fattore correttivo da 0,1 a 9,99999; |
|
| CM78H1N-S006N-220 |
CM78 Contatore a microprocessore - due preselezioni impostabili con 'range' fattore correttivo da 0,1 a 9,99999; |
|
| CM78H1N-S006N-24 |
CM78 Contatore a microprocessore - due preselezioni impostabili con 'range' fattore correttivo da 0,1 a 9,99999; |
|
| CM78H1N-S012N-220 |
CM78 Visualizzatore di quote con fattore correttivo e funzione di LOAD da tastiera o da ingresso; |
|
| CM78H1RX-S024N-220 |
CM78 Visualizzatore, RS232; |
|
| CM78H1RX-S039-24 |
CM78 Visualizzatore, RS232; |
|
| CM78N F05 |
CM78 Versioni Speciali. Al.220V-50HZ con Progr. F05; |
|
| CM78N-A1 F05 |
CM78 Versioni Speciali. Al.115V-50HZ con Progr. F05; |
|
| CM78N-C01 |
CM78 Contatore a microprocessore CM78N Alim. 230V-50/60Hz; |
|
| CM79-S012-220 |
CM79 Visualizzatore a Microprocessore; |
|
| CMSTUDIO |
CMSTUDIO software; CDROM includeed CM studio and cable |
|
| CON-PD-M-ENG |
Teaching Box; For CON, SEP and Robonet controllers with enable switch (dead-man switch) |
|
| CON-PT-M-ENG |
CON; Teaching box standard type |
|
| CON-PTA-C-ENG |
CON; Teaching box standard type |
|
| CP180LEE03C02 |
; Kawasaki high speed palletizing robot, 4 axes
payload 180kg
horizontal reach 3255mm
vertical reach 3255mm
repeatability +/-0.5mm
palletizing speed 2050cycles/hour (*)
floor mounting
controller E03 |
|
| CP300LEE03C02 |
; Kawasaki high speed palletizing robot, 4 axes
payload 300kg
horizontal reach 3255mm
vertical reach 3255mm
repeatability +/-0.5mm
palletizing speed 1700cycles/hour (*)
floor mounting
controller E03 |
|
| CPG-RCP6-S |
IAI Spare part; Coupling Spacer for actuators RCP6-S |
|
| CPS_10805183 |
; Coupling spacer RCP3-SA4C, SA5C, ERC2-RA6C |
|
| CSB200-883M |
Industrial PC; Steel System with IB883 3.5” SBC, Intel® Atom™ N270 (1.6GHz) CPU, 1GB DDR2, 2.5” 80GB MHY2080BS HD, 60W Power Adaptor |
|
| CX110LFE02C04 |
; Kawasaki heavy-duty robot, 6 axes
payload 110kg
horizontal reach 2699mm
vertical reach 3438mm
repeatability +/-0.06mm
floor mounting
controller E02 universal |
|
| CX165LFE02C04 |
; Kawasaki heavy-duty robot, 6 axes
payload 165kg
horizontal reach 2699mm
vertical reach 3438mm
repeatability +/-0.06mm
floor mounting
controller E02 universal |
|
| CX210LFE02C03 |
; Kawasaki heavy-duty robot, 6 axes
payload 210kg
horizontal reach 2699mm
vertical reach 3438mm
repeatability +/-0.06mm
floor mounting
controller E02 universal |
|
| D002-002-V3 |
Placas visualizadoras; Visualizador de 3,5 dígitos, entrada analógica, 2 escalas |
|
| D002-002-V4 |
Placas visualizadoras; Visualizador de 3,5 dígitos, entrada analógica, 2 escalas (entrada filtrada) |
|
| D002-002-V5 |
Placas visualizadoras; (DTD-2)Visualizador de 3,5 dígitos, entrada analógica, 2 escalas (entrada filtrada) |
|
| D002-003-V3 |
Placas visualizadoras; Visualizador de 4,5 dígitos, entrada analógica, 2 escalas con caja |
|
| D002-003-V4 |
Placas visualizadoras; Visualizador de 4,5 dígitos, entrada analógica y digital, 2 escalas con caja |
|
| D003-001-V3 |
Placas de reles; Placa de 14 reles para interface con Compact control |
|
| D004-002-V1 |
Placas de interface; Interface optoacoplado de 5 a 24 Vdc |
|
| D008-001 |
Placas de interface; Interface de encoder o regla señales cuadradas de 5 Vcc a 24 VCC, 2 canales |
|
| D008-112 |
Placas posicionadoras; Controladora de velocidad inercial para posicionamiento de variadores mecánicos |
|
| D060-001 |
MINI OPERATOR PANEL,; 1x16 DISP, 24 KEYS |
|
| D075-001 |
Placas Posicionadoras; Tarjeta posicionadora parametrica, 90 cotas para eje rotativo |
|
| D200-011-V4 |
Placas de reles; Placa de 33 reles para interface con control Dynapath Delta |
|
| D400-001 |
; Rochmann-UlLMA LE283-UN timer board |
|
| DC01-C1400/X4/X30 |
LINMOT DC01; Drive Connector Set for C1400-0S |
|
| DC01-C1400/X4/X30/X33 |
LINMOT DC01; Drive Connector Set for C1400-1S |
|
| DC01-C1X00-0S/X1/X4 |
LINMOT DC01; Drive Connector Set for C1x00-0S |
|
| DC01-C1X00-1S/X1/X4/X33 |
LINMOT DC01; Drive Connector Set for C1x00-1S |
|
| DC01-C1X00/X1 |
LINMOT DC01; Drive Connector X1 for C1x00 |
|
| DC01-C1X00/X2 |
LINMOT DC01; Drive Connector X2 for C1x00 |
|
| DC01-E1400/X1 |
LINMOT DC01; Drive Connector for E1400 for regeneration resistor / DC bus |
|
| DC01-E1400/X2 |
LINMOT DC01; Drive Connector for E1400 for motor phases |
|
| DC01-E1400/X31/X32 |
LINMOT DC01; Drive Connector Set for E1400 for motor brake |
|
| DC01-E1400/X4 |
LINMOT DC01; Drive Connector for E1400 for logic supply / IO connection |
|
| DC01-E1400/X4/X30 |
LINMOT DC01; Drive Connector Set for E1400-0S |
|
| DC01-E1400/X4/X30/X33 |
LINMOT DC01; Drive Connector Set for E1400-1S |
|
| DC01-Safety/X33 yello |
LINMOT DC01; Safety Connector for C1100-1S / C1200-1S / E1400-1S |
|
| DC1M-02GD41AW1DBLZ |
; |
|
| DC1M-04GD41AW1DBLZ |
; Industrial grade CF4000 compact flash 4 Gb |
|
| DC1M-16GD71AW1QB |
; Industrial grade CF4000 compact flash 16 Gb |
|
| DFMC1.5/6-ST-3.5 |
Conectores; MSEL System I/O Connecter |
|
| DM01-23x80F-HP-R-160_MS12 |
LINMOT DM01; Linear motor DM01-23x80F-HP, guide integrated, with MagSpring 17N, 160mm stroke |
|
| DM01-37x120F-HP-R-195 |
LINMOT DM01; Linear motor DM01-37x120F-HP, guide integrated, 195mm stroke |
|
| DM01-37x120F-HP-R-195_MS02 |
LINMOT DM01; Linear motor DM01-37x120F-HP, guide integrated, with MagSpring 40N, 195mm stroke |
|
| DM01-48x240F-HP-C-305_CS01 |
LINMOT DM01; Linear motor DM01-48x240F-HP, guide integrated, 305mm stroke |
|
| DM01-48x240F-HP-C-305_CS11 |
LINMOT DM01; Linear motor DM01-48x240F-HP, guide integrated, 305mm stroke |
|
| DP-2 |
; Dummy Connector DP-2 |
|
| DP-3 |
; Dummy Plug DP-3 |
|
| DP-4S |
; Dummy Plug DP-4 |
|
| DP_EG |
SEL; Super SEL Controller Dummy Connector |
|
| DSEP-C-3-I-PN-2-0 |
DSEP; Position controller for RCD 3W motor |
|
| DuAxThreadCheck |
Software; Dual Axis Thread-Check GUI On-time fee for Perpetual use of SMAC's Graphical User Interface |
|
| Duplicado RCS3-SS8C-I-100-5-1000-T2-M-A1E |
; ROBO cylinder slider - 230 Vac Servo Motor; Body width 80mm, coupled type, Iron base; Incremental encoder; 100 w servo motor; 5 mm pich; 1000 mm Travel; T2 Controller; 5 Mt standard cable; Cable exit back left side |
|
| Duplicado RS232 PC config. Cable 2m Dsub |
LINMOT RS232; RS232 Cable for LinMot Controller B1100/E1100 |
|
| DV-1101000000 |
; CODESYS Development System
- IEC 61131-3 Development System
- 6 integrated programming languages (ST, FUP, KOP, CFC, SFC, AWL)
- modern .net architecture
- objectoriented programming OOP in IEC
- integrated IO configuration
- Online-, Debugging- a |
|
| DV-1101000001 |
; CODESYS Automation Platform
- One year support
- One year updates
- Technical Workshop 3 days in Kempten (Germany) |
|
| DV-1102000000 |
; CODESYS Runtime Toolkit
- Runtime system software
- Support for porting and adaption
- 2 years runtime system updates
- V3 Technical Workshop Runtime 2 days in Kempten (Germany) |
|
| DXPLOG-E-SW |
; DeviceXPlorer Data Logger (DxpLOGGER), software license |
|
| DXPSVENT-E-HW |
; DXPSV Enterprise OPC Server, hardware license |
|
| DXPSVENT-E-SW |
; DXPSV Enterprise OPC Server, software download license |
|
| DXPSVSMT-E-HW |
; DXPSV OPC Server for Siemens, hardware licence |
|
| DXPSVSMT-E-SW |
; DXPSV OPC Server for Siemens, software download license |
|
| DXPV6AD-HW-E |
; DxpSERVER V6 Advanced OPC Server, single vendor device, hardware key license |
|
| DXPV6EP-DL-E |
; DxpSERVER V6 Enterprise OPC Server, download software license |
|
| E01-37S-SK/D-SSI |
LINMOT E01; Lineal E01 Absolute External Sensor kit |
|
| E01-37S/FWK-F |
LINMOT E01; Lineal E01 Carriage and ground plate for guides E01-37S |
|
| E01-37Sx1200 |
LINMOT E01; Lineal E01 Guide for PS01-37Sx120F, Stroke 1038mm |
|
| E01-37Sx800 |
LINMOT E01; Lineal E01 Guide for PS01-37Sx120F, Stroke 638mm |
|
| E01-MB1200/D-SSI |
LINMOT E01; Lineal E01 Absolute External Sensor Magnetic Strip for E01-37Sx1200 |
|
| E01-MB800/D-SSI |
LINMOT E01; Lineal E01 Absolute External Sensor Magnetic Strip for E01-37Sx800 |
|
| E01-TC1200-37 |
LINMOT E01; Lineal E01 Trailing chain kit for E01-37Sx1200 |
|
| E01-TC800-37 |
LINMOT E01; Lineal E01 Trailing chain kit for E01-37Sx800 |
|
| E0150 |
PLS Snodo sferico; SF |
|
| E0155 |
PLS Puntale a sfera; PS |
|
| E0156 |
PD Snodo sferico; per transducttori lineari |
|
| E0157 |
PLS Giunto di disassamento; GD |
|
| E04sr401938 |
CE conformity; Clamp filter SEIWA |
|
| E100-AT |
LINMOT E100; Servo Controller AnalogTrigger 1 Axis, 48V/3A |
|
| E1100-CO |
LINMOT E1100; Servo Controller CANopen, 72V/4A |
|
| E1100-CO-HC |
LINMOT E1100; Servo Controller CANopen, 72V/15A |
|
| E1100-CO-XC |
LINMOT E1100; Servo Controller CANopen, 72V/25A |
|
| E1100-DN |
LINMOT E1100; Servo Controller DeviceNet, 72V/4A |
|
| E1100-DN-HC |
LINMOT E1100; Servo Controller DeviceNet, 72V/15A |
|
| E1100-GP-HC |
LINMOT E1100; Servo Controller General Purpose, 72V/15A |
|
| E1100-RS |
LINMOT E1100; Servo Controller RS232/RS485, 72V/4A |
|
| E1100-RS-HC |
LINMOT E1100; Servo Controller RS232/RS485, 72V/15A |
|
| E1100-RS-XC |
LINMOT E1100; Servo Controller RS232/RS485, 72V/25A |
|
| E1130-DP |
LINMOT E1130; Servo Controller Profibus DP, 72V/8A |
|
| E1130-DP-HC |
LINMOT E1130; Servo Controller Profibus DP, 72V/15A |
|
| E1200-GP-UC |
LINMOT E1200; Servo Controller General Purpose, 72V/32A |
|
| E1250-EC-UC |
LINMOT E1200; Servo Controller EtherCAT, 72V/32A |
|
| E1250-IP-UC |
LINMOT E1200; Servo Controller Ethernet IP, 72V/32A |
|
| E1250-PD-UC |
LINMOT E1200; Servo Controller ProfiDrive, 72V/32A |
|
| E1250-PL-UC |
LINMOT E1200; Servo Controller PowerLink, 72V/32A |
|
| E1250-PN-UC |
LINMOT E1200; Servo Controller Profinet, 72V/32A |
|
| E1400-EC-QN |
LINMOT E1400; Servo Controller EtherCAT, 3x400V/28A |
|
| E1400-GP-QN-0S |
LINMOT E1400; Servo Controller General Purpose, 3x400V/28A |
|
| E1400-GP-QN-1S |
LINMOT E1400; Servo Controller General Purpose, 3x400V/28A, STO internal safety |
|
| E1400-IP-QN |
LINMOT E1400; Servo Controller Ethernet/IP DP, 3x400V/28A |
|
| E1430-DP-QN-0S |
LINMOT E1400; Servo Controller Profibus DP, 3x400V/28A |
|
| E1450-DS-QN-0S |
LINMOT E1400; Servo Controller EtherCAT CiA402, 3x400V/28A |
|
| E1450-DS-QN-1S |
LINMOT E1400; Servo Controller EtherCAT CiA402, 3x400V/28A, STO internal safety |
|
| E1450-EC-QN-0S |
LINMOT E1400; Servo Controller EtherCAT, 3x400V/28A |
|
| E1450-EC-QN-1S |
LINMOT E1400; Servo Controller EtherCAT, 3x400V/28A, STO internal safety |
|
| E1450-IP-QN-0S |
LINMOT E1400; Servo Controller Ethernet/IP, 3x400V/28A |
|
| E1450-IP-QN-1S |
LINMOT E1400; Servo Controller Ethernet/IP, 3x400V/28A, STO internal safety |
|
| E1450-LU-QN-0S |
LINMOT E1400; Servo Controller LinUDP, 3x400V/28A |
|
| E1450-PD-QN-1S |
LINMOT E1400; Servo Controller ProfiDrive, 3x400V/28A, STO internal safety |
|
| E1450-PN-QN-0S |
LINMOT E1400; Servo Controller ProfiNet, 3x400V/28A |
|
| E1450-PN-QN-1S |
LINMOT E1400; Servo Controller ProfiNet, 3x400V/28A, STO internal safety |
|
| E230-DP |
LINMOT E230; Servo Controller Profibus DP 2 Axis, 48V/3A |
|
| E303000824R4PP |
E30 Miniature Incremental Encoder (without zero pulse); 3000 pulses/rev, Supply 8...24Vdc, Radial cable Push Pull output |
|
| E31360824A4PP |
E31 Miniature Incremental Encoder (with zero pulse); 360 pulses/rev, Supply 8...24Vdc, Push Pull output |
|
| E32010001015PP |
E320 Encoder Bidirezionale, senza impulso di zero; 1000 impulsi/giro |
|
| E320100024PP2 |
E320 Encoder Bidirezionale, senza impulso di zero; 1000 impulsi/giro |
|
| E321-500 |
E321 Encoder Bidirezionale, con impulso di zero; 500 impulsi/giro |
|
| E3211001024PP |
E321 Encoder Bidirezionale, con impulso di zero; 100 impulsi/giro |
|
| E321251024PP |
E321 Encoder Bidirezionale, con impulso di zero; 25 impulsi/giro |
|
| E3215001015PP |
E321 Encoder Bidirezionale, con impulso di zero; 500 impulsi/giro |
|
| E400-AT |
LINMOT E400; Servo Controller AnalogTrigger 4 Axis, 48V/3A |
|
| E4001-MT |
LINMOT E4001; Servo Controller Multi Trigger 4 Axis, 72V/8A |
|
| E400C300824R6PP |
E400 Encoder Bidirezionale, senza impulso di zero; 300 impulsi/giro |
|
| E401-500-8/24-A-10-PPX05 |
E401 Encoder Bidirezionale, con impulso di zero; 500 i/g connettore 5poli Maschio giunto grani M4 |
|
| E4031-DP |
LINMOT E4031; Servo Controller Profibus DP 4 Axis, 72V/8A |
|
| E410250824R15PP2 |
E410 Encoder Bidirezionale, senza impulso di zero; 250 impulsi/giro |
|
| E52010001024R6PP2 |
E520 Encoder Bidirezionale, senza impulso di zero; 1000 impulsi/giro |
|
| E5215001024R6LD |
E521 Encoder Bidirezionale, con impulso di zero; 500 impulsi/giro Line driver alimentacione 10-24 Vdc |
|
| E620-250 |
E620 Encoder Bidirezionale, senza impulso di zero; 250 impulsi/giro |
|
| E620-2501024R10OC2 |
E620 Encoder Bidirezionale, senza impulso di zero; 250 impulsi/giro 10-24V uscita Open colector 2 |
|
| E62010001024A10OC2 |
E620 Encoder Bidirezionale, senza impulso di zero; 1000 impulsi/giro |
|
| E62010001024A8PP2 |
E620 Encoder Bidirezionale, senza impulso di zero; 1000 impulsi/giro |
|
| E62010001024R10PP2 |
E620 Encoder Bidirezionale, senza impulso di zero; 1000 impulsi/giro |
|
| E62010001024R6PP2 |
E620 Encoder Bidirezionale, senza impulso di zero; 1000 impulsi/giro |
|
| E62010005R10LD5V |
E621 Encoder Bidirezionale, senza impulso di zero, line driver 5 Vdc; 1000 impulsi/giro |
|
| E6202001024R8PP2 |
E620 Encoder Bidirezionale, senza impulso di zero; 200 impulsi/giro,10/24 VDC, Radial 0utput 8mm, |
|
| E62025001028R9,52PP1X12 |
E620 Encoder Bidirezionale, senza impulso di zero; 2500 impulsi/giro,10/28, Radial output 9.52mm |
|
| E6205001024A8PP2 |
E620 Encoder Bidirezionale, senza impulso di zero; 500 impulsi/giro |
|
| E62110001024R10LD5V |
E621 Encoder Bidirezionale, con impulso di zero, line driver 5 Vdc, alimentacione 10 24v; 1000 impulsi/giro |
|
| E62110001024R10PP2 |
E620 Encoder Bidirezionale, con impulso di zero; 1000 impulsi/giro |
|
| E62110005R10LD5V |
E621 Encoder Bidirezionale, con impulso di zero, line driver 5 Vdc; 1000 impulsi/giro |
|
| E62110005R6LD5V |
E621 Encoder Bidirezionale, con impulso di zero, line driver 5 Vdc; 1000 impulsi/giro |
|
| E6211001024A10PP1 |
E621 Encoder Bidirezionale, con impulso di zero; 100 impulsi/giro |
|
| E6212505R6LD5V |
E621 Encoder Bidirezionale, con impulso di zero, line driver 5 Vdc; 250 impulsi/giro |
|
| EC-GD4M-50-0-ENG-PN |
EC; ELECYLINDER EC-GD4M-50-0-ENG-PN
Electric cylinder mini rod type
Stepper motor side mounted
Double guide
Incremental encoder
Ball screw, lead 4mm
Stroke 50mm
PNP specification
Conection to terminal block |
|
| EC-GD4M-50-0-ENG-PN-WA-WL2 |
EC; ELECYLINDER EC-GD4M-50-0-ENG-PN-WA-WL2
Electric cylinder mini rod type
Stepper motor side mounted
Double guide
Battery-less absolute encoder
Wireless communication configuration + axis operation
Ball screw, lead 4mm
Stroke 50mm
PNP specificati |
|
| EC-GS4M-50-0-ENG-GT2-PN-WA-WL2 |
EC; ELECYLINDER EC-GS4M-50-0-ENG-GT2- PN-WA-WL2
Electric cylinder mini rod type
Stepper motor side mounted
Single guide right mount
Battery-less absolute encoder
Wireless communication configuration + axis operation
Ball screw, lead 4mm
Stroke 50mm |
|
| EC-R6H-150-0-ENG-PN-WA-WL2 |
EC; ELECYLINDER EC-R6H-150-0-ENG-PN-WA-WL2
Electric actuator cylinder type
Stepper motor coupled
Battery-less absolute encoder
Wireless communication configuration + axis operation
Ball screw, lead 12mm
Stroke 150mm
PNP specification
Conection to |
|
| EC-R7HW-150-0-ENG-PN |
EC; ELECYLINDER EC-R7HW-150-0-ENG-PN
Electric actuator cylinder type, IP67 protection type
Stepper motor coupled
Incremental encoder
Ball screw, lead 16mm
Stroke 150mm
PNP specification
Conection to terminal block |
|
| EC-R7M-100-0-ENG-PN-WA |
EC; ELECYLINDER EC-R7M-100-0-ENG-PN-WA
Electric actuator cylinder type
Stepper motor coupled
Battery-less absolute encoder
Ball screw, lead 8mm
Stroke 100mm
PNP specification
Conection to terminal block |
|
| EC-RR3M-200-0-ENG-MOT-PN-WA-WL2 |
EC; ELECYLINDER EC-RR3M-200-0-ENG-MOT-PN-WA-WL2
Electric actuator radial cylinder type
Stepper motor coupled mounted to top
Battery-less absolute encoder
Wireless communication configuration + axis operation
Ball screw, lead 4mm
Stroke 200mm
PNP sp |
|
| EC-RR6H-165-0-ENG-PN |
EC; ELECYLINDER EC-RR6H-165-0-ENG-PN
Electric actuator radial cylinder type
Stepper motor coupled
Incremental encoder
Ball screw, lead 12mm
Stroke 165mm
PNP specification
Conection to terminal block |
|
| EC-S6H-300-0-ENG-PN-WA-WL2 |
EC; ELECYLINDER EC-S6H-300-0-ENG-PN-WA-WL2
Electric actuator slider type
Stepper motor coupled
Battery-less absolute encoder
Wireless communication configuration + axis operation
Ball screw, lead 12mm
Stroke 300mm
PNP specification
Conection to te |
|
| EC-S6H-300-0-ENG-PN-WL2 |
EC; ELECYLINDER EC-S6H-300-0-ENG-PN-WL2
Electric actuator slider type
Stepper motor coupled
Incremental encoder
Wireless communication configuration + axis operation
Ball screw, lead 12mm
Stroke 300mm
PNP specification
Conection to terminal block |
|
| EC-S6H-400-0-ENG-PN-WA |
EC; ELECYLINDER EC-S6H-400-0-ENG-PN-WA
Electric actuator slider type
Stepper motor coupled
Battery-less absolute encoder
Ball screw, lead 12mm
Stroke 400mm
PNP specification
Conection to terminal block |
|
| EC-S6MR-200-0-ENG-ML-PN-WA-WL2 |
EC; ELECYLINDER EC-S6MR-200-0-ENG-ML-PN-WA-WL2
Electric actuator slider type
Stepper motor side mounted to left
Battery-less absolute encoder
Wireless communication configuration + axis operation
Ball screw, lead 6mm
Stroke 200mm
PNP specification
|
|
| EC-S6SR-400-0-ENG-ML-PN-WA |
EC; ELECYLINDER EC-S6SR-400-0-ENG-ML-PN-WA
Electric actuator slider type
Stepper motor coupled
Battery-less absolute encoder
Ball screw, lead 16mm
Stroke 500mm
PNP specification
Conection to terminal block |
|
| EC-S7H-500-0-ENG-PN-WA |
EC; ELECYLINDER EC-S7H-500-0-ENG-PN-WA
Electric actuator slider type
Stepper motor coupled
Battery-less absolute encoder
Ball screw, lead 16mm
Stroke 500mm
PNP specification
Conection to terminal block |
|
| EC-SA6 End Cover |
; EC-SA6 End Cover |
|
| EC-TBCA-81702010-00-000 |
EC; ELECYLINDER EC_TBCA_81702010-00-000
Terminal block |
|
| EC-TW4M-50-0-ENG-PN |
EC; ELECYLINDER EC-TW4M-50-0-ENG-PN
Electric actuator mini table type
Stepper motor side mounted
Incremental encoder
Ball screw, lead 4mm
Stroke 50mm
PNP specification
Conection to terminal block |
|
| EC-TW4M-50-0-ENG-PN-WA-WL2 |
EC; ELECYLINDER EC-TW4M-50-0-ENG-PN-WA-WL2
Electric actuator mini table type
Stepper motor side mounted
Battery-less absolute encoder
Wireless communication configuration + axis operation
Ball screw, lead 4mm
Stroke 50mm
PNP specification
Conectio |
|
| EC02-40/140 |
LINMOT EC02; EC Servo Motor 70W 0.38Nm 4000rpm |
|
| ECA161-0 |
MULTI DIGITAL OUTPUT MOD; ULE 4x4 RELAY 2A/24VDC |
|
| ECA161-01 |
Midi/M264/Multicontrol - Digital Output Modules; MULTI digital output module
16 relay outputs 220 VAC / 24 VDC, 2 A
4 electrically isolated output groups |
|
| ECA162-01 |
Midi/M264/Multicontrol - Digital Output Modules; MULTI digital output module
16 transistor outputs 24 VDC, 2 A |
|
| ECA244-0 |
Midi/M264/Multicontrol - Digital Output Modules; MULTI digital output module
24 transistor outputs 24 VDC, 0.5 A |
|
| ECBL01-0 |
Midi/M264/Multicontrol - Accessories; MULTI dummy front, 1 slot |
|
| ECBL02-0 |
Midi/M264/Multicontrol - Accessories; MULTI dummy front, 2 slots |
|
| ECCP40-01 |
Midi/M264/Multicontrol - CPU Systems; MULTI CPU type A
Order application memory EE32 with
16 KByte EEPROM and 16 KByte SRAM for
4.7 KB instructions separately!
1 TTY online interface with
electrically isolated receiver
Can be used in MULTI/MIDI module rac |
|
| ECCP60-01 |
Midi/M264/Multicontrol - CPU Systems; MULTI CPU type B
42 KByte SRAM for 42 KB instructions
Order PROM application memory separately
1 TTY online interface with
electrically isolated receiver
Can be used in MULTI/MIDI module racks |
|
| ECCP70-01 |
Midi/M264/Multicontrol - CPU Systems; MULTI CPU type B
42 KByte SRAM for 42 KB instructions
Order PROM application memory separately
1 TTY online interface with
electrically isolated receiver
1 RS485/RS232/TTY interface
RS485: elec. isolated, network-capa |
|
| ECE161-0 |
Midi/M264/Multicontrol - Digital Input Modules; MULTI digital input module
16 inputs 24 VDC/VAC
0->1: 10 msec, 1->0: 20 msec
Sink/source |
|
| ECE161-1 |
Midi/M264/Multicontrol - Digital Input Modules; MULTI digital input module
16 inputs 24 VDC/VAC
0->1: 1 msec, 1->0: 2 msec, sink/source |
|
| ECE162-0 |
MULTI INPUT MODULE 16 x; 220V AC |
|
| ECE243-0 |
Midi/M264/Multicontrol - Digital Input Modules; MULTI digital input module
24 inputs 24 VDC, 10 msec, sink
2 electrically isolated input groups |
|
| ECE243-1 |
Midi/M264/Multicontrol - Digital Input Modules; MULTI digital input module
24 inputs 24 VDC, 1 msec, sink
2 electrically isolated input groups |
|
| ECEE32-0 |
Midi/M264/Multicontrol - Memory Modules; MINI/MULTI application memory
For type A CPUs, 16 KB EEPROM
16 KByte SRAM for 4.7 KB instructions |
|
| ECEE32MP-0 |
Midi/M264/Multicontrol - Memory Modules; MINI/MULTI application memory
Combination of network capable online
interface module with modem interface
and EEPROM/RAM application memory
For type A CPUs, 16 KB EEPROM
16 KByte SRAM for 4.7 KB instructions |
|
| ECEP05-0 |
EPROM MEMORY MODULE; 4.7 k |
|
| ECEP128-0 |
Midi/M264/Multicontrol - Memory Modules; MULTI application memory
For type B CPUs and PPs
128 KB EPROM for 42 KB instructions and
34 KB system module |
|
| ECEXE3-0 |
Midi/M264/Multicontrol - Bus Controller Modules; MULTI expansion receiver module
For connection of an expansion rack to
the main rack
Can be used in MULTI module racks |
|
| ECEXS2-1 |
Midi/M264/Multicontrol - Bus Controller Modules; MULTI expansion sender module
For connection of up to
3 expansion racks
Can be used in MULTI module racks |
|
| ECFP128-0 |
Midi/M264/Multicontrol - Memory Modules; MULTI application memory
For type B CPUs and PPs
128 KB FlashPROM for 42 KB instructions,
34 KB system module and
48 KB application data |
|
| ECINT1-0 |
ACCESS. NETWORK COUPLER; RS232 - RS485 |
|
| ECINT1-1 |
Accessories System 2000 - Hardware; RS232/RS485 interface converter
Electrically isolated, for coupling
RS232 interface modules to an RS485
twisted pair network
Without lightning protection |
|
| ECNT40-0 |
Midi/M264/Multicontrol - Power Supply Modules; MULTI power supply module
24 VDC, 50 W
Can be used in MULTI/MIDI module racks |
|
| ECNT43-0 |
Midi/M264/Multicontrol - Power Supply Modules; MULTI power supply module
24 VDC, 100 W
With extended diagnostics functions
Can be used in MULTI/MIDI module racks |
|
| ECNT44-0 |
Midi/M264/Multicontrol - Power Supply Modules; MULTI power supply module
240 VAC, 100 W
With extended diagnostics functions
Can be used in MULTI/MIDI module racks |
|
| ECPA42-0 |
Midi/M264/Multicontrol - Analog Output Modules; MULTI analog output module
4 outputs, +/- 10 V, 11 bit |
|
| ECPA81-0 |
Midi/M264/Multicontrol - Analog Output Modules; MULTI analog output module
8 outputs, +/- 10 V, 11 bit |
|
| ECPA81-01 |
Midi/M264/Multicontrol - Analog Output Modules; MULTI analog output module
8 outputs, +/- 10 V, 13 bit |
|
| ECPA81-2 |
Midi/M264/Multicontrol - Analog Output Modules; MULTI analog output module
8 outputs, 0 to 20 mA, 11 bit |
|
| ECPA81-21 |
Midi/M264/Multicontrol - Analog Output Modules; MULTI analog output module
8 outputs, 0 to 20 mA, 12 bit |
|
| ECPE16-0 |
Midi/M264/Multicontrol - Analog Input Modules; MULTI analog input module
16 inputs, 16 bit
0 to 10 V, 0 to 50 mA
PT100 2- or 3-line connection
NTC resistance measurement (1 - 50 kOhm)
PTC resistance measurement (0 - 2 kOhm) |
|
| ECPE42-1 |
MULTI ANALOG INPUT MODUL; E, 4x 0-10V 10 Bit |
|
| ECPE82-01 |
MULTI ANALOG INPUT MODUL; |
|
| ECPE82-2 |
MULTI ANALOG INPUT MODUL; E 8x 0-20Ma |
|
| ECPE82-23 |
Midi/M264/Multicontrol - Analog Input Modules; MULTI analog input module
8 inputs, 0 to 20 mA, 10 bit |
|
| ECPE84-0 |
Midi/M264/Multicontrol - Analog Input Modules; MULTI analog input module
8 inputs, 0 to 10 V, 16 bit |
|
| ECPE84-1 |
MULTI ANALOG INPUT; 8x0-10V, 16bit, isol. |
|
| ECPE84-2 |
Midi/M264/Multicontrol - Analog Input Modules; MULTI analog input module
8 inputs, 0 to 25 mA, 15 bit |
|
| ECPIF3-0 |
Midi/M264/Multicontrol - Interface Modules; MULTI interface module
2 RS232/TTY interfaces
TTY: with electrically isolated receiver
1 CENTRONICS interface |
|
| ECPMV4-4 |
MULTI PROPORTIONAL; MAGNET VALVE MODULE |
|
| ECPNC1-1 |
Midi/M264/Multicontrol - Counter and Motion Control Modules; MULTI counter module (positioning)
1 input for incremental encoder, 24 bit
Input frequency 50 kHz
1 analog output +/- 10 V, 11 bit
Encoder input not electrically isolated
Encoder supply 5 to 15 |
|
| ECPNC3-1 |
Midi/M264/Multicontrol - Counter and Motion Control Modules; MULTI counter module (positioning)
1 input for incremental encoder, 24 bit
Input frequency 50 kHz
1 analog output +/- 10 V, 11 bit
Encoder supply 5 to 15 VDC |
|
| ECPP40-01 |
Midi/M264/Multicontrol - Programmable Modules; MULTI parallel processor type A
Order application memory EE32 with
16 KByte EEPROM and 16 KByte SRAM for
4.7 KB instructions separately!
1 TTY online interface with
electrically isolated receiver
1 RS232/TTY |
|
| ECPP40IF4-11 |
Midi/M264/Multicontrol - Programmable Modules; MULTI PPU INTERFACE MODU
LE; 6303CPU, 4x RS422 |
|
| ECPP60-01 |
Midi/M264/Multicontrol - Programmable Modules; MULTI parallel processor type B
42 KByte SRAM for 42 KB instructions
Order PROM application memory separately
1 TTY online interface with
electrically isolated receiver
1 RS485/RS232/TTY interface
RS485: elec |
|
| ECPP60MEM-01 |
Midi/M264/Multicontrol - Programmable Modules; MULTI parallel processor type B
42 KByte SRAM for 42 KB instructions
128 KByte SRAM data memory
Order PROM application memory separately
1 TTY online interface with
electrically isolated receiver
1 RS485/RS23 |
|
| ECPPM2-1 |
MULTI PPU COUNTER MODULE; ; 24V |
|
| ECPPM2-OL |
MULTI PPU COUNTER MODULE; ;2axis, isolated |
|
| ECPSA2-0 |
Midi/M264/Multicontrol - Counter and Motion Control Modules; MULTI module - stepper motor positioning
2 axes, valid for both axes:
5 digital inputs 24 VDC, sink
1 transistor output 5 to 24 VDC, 50 mA
Pulse frequency 25 Hz to 20 kHz
3 transistor outputs 5 |
|
| ECPT81-0 |
Midi/M264/Multicontrol - Temperature Input Modules; MULTI analog input module
8 inputs, PT100 (3-line connection)
-25 to +475 degrees C |
|
| ECPT81-1 |
Midi/M264/Multicontrol - Temperature Input Modules; MULTI analog input module
8 inputs, PT100 (4-line connection)
-25 to +475 degrees C |
|
| ECPTE8-1 |
MULTI THERMOCOUPLE INPUT; Ni-Cr-Ni 0-600C, type |
|
| ECR165-0 |
Midi/M264/Multicontrol - Module Racks; MULTI module rack for 16 PLC modules |
|
| EDC-08APE |
Driver; Servo dirver CAN bus |
|
| EM410-1024-8/24-R-15-PPX62 |
; bid. 1024 i/g special execution, 3fixing holes M4x8 to 120 Degrees of diameter 48mm. Alim. 8 / 24Vdc |
|
| EMJ-08APA21 |
Servo Motor; 0,75Kw 2,39NM |
|
| EQN425 512 03S17-58K |
Rotary Encoder; For absolute multiturn position values with blind hollow shaft, EnDAT 2.2, 13 bits binary code, 4096 revolutions, 512 lines |
|
| ERC2-MU6PN |
ERC2; ROBO cylinder ERC2-RA6C Motor Encoder Unit PNP |
|
| ERC2-MU6PN-BR |
ERC2; ROBO cylinder ERC2-RA6C-B Motor Encoder Unit with brake cover PNP |
|
| ERC3-MURA4I-PN-CN |
Remplacement; ERC3 spare motor/controller, PNP type |
|
| ERN1120 100069S12-30 |
Reemplacement; Encoder reemplacement (Heidenhein) for motor M55-555-K5-T07-E53 1000 pulses |
|
| ERN1120 125069S12-30 |
Reemplacement; Encoder reemplacement (Heidenhein) for motor M55-555-K5-T07-E53 1250 pulses |
|
| ES-172 |
Visualizador; Terminal d'affichage alphanumerique adressable et rappel de messages |
|
| ES-178 |
Visualizador; Terminal d'affichage alphanumerique adressable avec clavier et rappel de messages |
|
| ET500F-R |
; ETX Geode LX800 |
|
| ET839-45 |
; ETX Embedded Module Atom Bay Trail E3845, quad core 1.91Ghz |
|
| EV01-E1400 |
LINMOT EV01; Fan cooling for E1400 |
|
| EX5-ABSTE-NA00 |
KEP Server Ex driver version 5; OPC DA Client Driver OPC V5 Server for Allen Bradley |
|
| EX5-BLDAT-SUIT |
KEP Server Ex driver version 5; Bulding automation suite OPC V5 Manufacturing suite |
|
| EX5-DLOGR-NA00 |
KEP Server Ex driver version 5; Data logger plugin |
|
| EX5-GEFCS-NA00 |
KEP Server Ex driver version 5; OPC DA Client Driver OPC V5 Server
GE Intelligent Platforms (GE Fanuc) Focas Ethernet OPC Server |
|
| EX5-HILUN-NA00 |
KEP Server Ex driver version 5; Hilscher universal driver |
|
| EX5-MDBUS-NA00 |
KEP Server Ex driver version 5; for Modbus Ascci, Ethernet, Plus, RTU, Serial |
|
| EX5-MITSU-NA00 |
KEP Server Ex driver version 5; Kep Driver Driver OPC Server for Mitsubishi Suite |
|
| EX5-MNFNG-SUIT |
KEP Server Ex driver version 5; OPC DA Client Driver OPC V5 Manufacturing suite |
|
| EX5-ODBCI-NA00 |
KEP Server Ex driver version 5; OPC ODBC API - Open DataBase Connectivity Application Programming Interface |
|
| EX5-OMRNF-NA00 |
KEP Server Ex driver version 5; OPC server for Omron FINS Ethernet / Serial, Host link, Process suite, Toolbus |
|
| EX5-OPCCS-NA00 |
KEP Server Ex driver version 5; OPC DA Client Driver OPC Server |
|
| EX5-SIEMS-NA00 |
KEP Server Ex driver version 5; OPC DA Client Driver OPC V5 Server for Siemens |
|
| ExtAxis-1.2kW-S |
; Kawasaki Motor ExtAxis-1.2kW-S
Straight shaft 1.2kW motor, composed by
OPT-50601-1491 motor Sanyo 1.2kW, Straight shaft, 2000rpm rated, Mmax 16.0Nm, Mn 5.7Nm |
|
| ExtAxis-200W-S |
; Kawasaki Motor ExtAxis-200W-S
Straight shaft 200W motor, composed by
OPT-50601-1462 motor Sanyo 200W, Straight shaft, 3000rpm rated, Mmax 2.2Nm, Mn 0.637Nm |
|
| ExtAxis-4.2kW-T |
; Kawasaki Motor ExtAxis-4.2kW-T
Taper shaft 4.2kW motor, composed by
OPT-50601-1412 motor Sanyo 4.2kW, taper shaft, 2400rpm rated, Mmax 68.6Nm, Mn 16,7Nm |
|
| ExtAxis-5.0kW-T |
; Kawasaki Motor ExtAxis-5.0kW-T
Taper shaft 5.0kW motor, composed by
OPT-50601-0128 motor Sanyo 5.0kW, taper shaft, 2000rpm rated, Mmax 70.0Nm, Mn 24.0Nm |
|
| ExtAxis-C1-E01-BA-1.2kW/L2 |
; Kawasaki Harness ExtAxis-C1-E01-BA-1.2kW/L2
External Axis C1 Cable
Length 2m
For E01 Controller BA arm 1.2kW motor, composed by
OPT-50975-0168L05 cable motor 2m
OPT-50975-0169L05 cable signal 2m |
|
| ExtAxis-C1-E01-BA-1.2kW/L5 |
; Kawasaki Harness ExtAxis-C1-E01-BA-1.2kW/L5
External Axis C1 Cable
Length 5m
For E01 Controller BA arm 1.2kW motor, composed by
OPT-50975-0168L05 cable motor 5m
OPT-50975-0169L05 cable signal 5m |
|
| ExtAxis-C1-E02-CX-2.0kW/L2 |
; Kawasaki Harness ExtAxis-C1-E02-CX-2.0kW/L2
External Axis C1 Cable
Length 2m
For E02 Controller CX arm 2.0kW motor, composed by
OPT-50975-7831L02 cable motor/signal 2m
OPT-60341-0328 rubber packing |
|
| ExtAxis-C2-E02-CX/L10 |
; Kawasaki Harness ExtAxis-C2-E02-CX/L10
External Axis C2 Cable
Length 10m
For E02 Controller CX arm, composed by
OPT-50979-0498L10 cable X3 10m
OPT-50979-0500L10 cable X4 10m
OPT-50979-0501L10 cable X5 10m |
|
| ExtAxis-C2-E58-MG/L40 |
; Kawasaki Harness ExtAxis-C2-E58-MG/L40
External Axis C2 Cable OPT-40252-G925
Length 40m
For E58 Controller MG arm, composed by
OPT-50979-0746L40 cable 40m
OPT-50979-0747L40 cable 40m
OPT-50979-0748L40 cable 40m
OPT-50979-0749L40 cable 40m |
|
| ExtAxis-C5-MultiAxis-DBOX/L05 |
; Kawasaki Harness ExtAxis-C5-MultiAxis-DBOX/L05
External Axis C5 Cable
Length 5m
For Multi-Axis Controller to Multi-Axis Distribution Box, composed by
OPT-50979-0448L05 cable 5m
OPT-50979-0449L05 cable 5m
OPT-50979-0450L05 cable 5m |
|
| ExtAxis-C6-DBOX-200W/L05 |
; Kawasaki Harness ExtAxis-C6-DBOX-200W/L05
External Axis C6 Cable
Length 5m
For Multi-Axis Distribution Box to 200W motor, composed by
OPT-50979-0079L05 cable motor 5m
OPT-50979-0080L05 cable signal 5m |
|
| ExtAxis-C6-DBOX-200W/L10 |
; Kawasaki Harness ExtAxis-C6-DBOX-200W/L10
External Axis C6 Cable
Length 10m
For Multi-Axis Distribution Box to 200W motor, composed by
OPT-50979-0079L10 cable motor 10m
OPT-50979-0080L10 cable signal 10m |
|
| ExtAxis-C6-DBOX-4.2kW/L30 |
; Kawasaki Harness ExtAxis-C6-DBOX-4.2kW/L30
External Axis C6 Cable
Length 30m
For Multi-Axis Distribution Box to 4.2kW motor, composed by
OPT-50979-0019L30 cable motor 30m
OPT-50979-3339L30 cable signal 30m |
|
| EXTSERMODEM |
Modem; Modem externo 64 K generico |
|
| F01h-KS1200 |
LINMOT F01; Lineal F01 Trailing chain for F01-37Sx1200 & F01-48x1220 |
|
| F01k-PR01-84 |
LINMOT F01; Lineal F01 Adapter plate for linear rotary motors PR01-84x80-C/48x240F-C100 (-L) (-G0x) & PR01-84x80-C/48x360F-C100 (-L) (-G0x) |
|
| FKC2.5HC/4-ST-5.08 |
Conectores; MSEP Power Supply Connector |
|
| FT60-1206-FIA-KM8-L2 |
FT actuator; FT60 linear actuator, 152mm frame size, 305mm stroke, 6mm lead, 201mm/s linear speed, mounting style front flange, motor mounting inline direct drive, rod end male metric, motor mount Kollmorgen KM8, 2 external limit switches |
|
| GASAUTDEF |
Sevice; Deafault Hidewide rate |
|
| GEN32-1500 |
Genesis 32 Automation Suite Version 8; Including: GraphWorX32, TrendWorX32, AlarmWorX32, Unfied Data Browser, ScriptWorX32, ProjectWorX32, Gen32-Symbols, Data base connectors to MS-SQL, MSDE and MS Access, Runtime for 1500 I/O Points |
|
| GEN32KEY-USB V9 |
Genesis 32 Hardware Key- USB Port version; Hardware copy protection Key for Genesis32 products. This may be used insted of standard software copy protection Key |
|
| GEN32V6.1-300 |
Genesis 32 Automation Suite Version 6.1; Including: GraphWorX32, TrendWorX32, AlarmWorX32, Unfied Data Browser, ScriptWorX32, ProjectWorX32, Gen32-Symbols, Data base connectors to MS-SQL, MSDE and MS Access, Runtime for 300 I/O Points |
|
| GEN32V9-150 |
Genesis 32 Automation Suite Version 9; Including: GraphWorX32, TrendWorX32, AlarmWorX32, Unfied Data Browser, ScriptWorX32, ProjectWorX32, Gen32-Symbols, Data base connectors to MS-SQL, MSDE and MS Access, Runtime for 150 I/O Points |
|
| GEN32V9-1500 |
Genesis 32 Automation Suite Version 9; Including: GraphWorX32, TrendWorX32, AlarmWorX32, Unfied Data Browser, ScriptWorX32, ProjectWorX32, Gen32-Symbols, Data base connectors to MS-SQL, MSDE and MS Access, Runtime for 1500 I/O Points |
|
| GEN32V9-15000 |
Genesis 32 Automation Suite Version 9; Including: GraphWorX32, TrendWorX32, AlarmWorX32, Unfied Data Browser, ScriptWorX32, ProjectWorX32, Gen32-Symbols, Data base connectors to MS-SQL, MSDE and MS Access, Runtime for 15000 I/O Points |
|
| GEN32V9-300 |
Genesis 32 Automation Suite Version 9; Including: GraphWorX32, TrendWorX32, AlarmWorX32, Unfied Data Browser, ScriptWorX32, ProjectWorX32, Gen32-Symbols, Data base connectors to MS-SQL, MSDE and MS Access, Runtime for 300 I/O Points |
|
| GEN32V9-500 |
Genesis 32 Automation Suite Version 9; Including: GraphWorX32, TrendWorX32, AlarmWorX32, Unfied Data Browser, ScriptWorX32, ProjectWorX32, Gen32-Symbols, Data base connectors to MS-SQL, MSDE and MS Access, Runtime for 500 I/O Points |
|
| GEN32V9-5000 |
Genesis 32 Automation Suite Version 9; Including: GraphWorX32, TrendWorX32, AlarmWorX32, Unfied Data Browser, ScriptWorX32, ProjectWorX32, Gen32-Symbols, Data base connectors to MS-SQL, MSDE and MS Access, Runtime for 5000 I/O Points |
|
| GEN32V9-75 |
Genesis 32 Automation Suite Version 9; Including: GraphWorX32, TrendWorX32, AlarmWorX32, Unfied Data Browser, ScriptWorX32, ProjectWorX32, Gen32-Symbols, Data base connectors to MS-SQL, MSDE and MS Access, Runtime for 75 I/O Points |
|
| GEN32V9-BROWSER |
Genesis 32 Browser system Version 9; IGen32 network client with full genesis32 capabilities, but no local OPC data connectivity |
|
| GEN32V92-150 |
Genesis 32 Automation Suite Version 9.2; Including: GraphWorX32, TrendWorX32, AlarmWorX32, Unfied Data Browser, ScriptWorX32, ProjectWorX32, Gen32-Symbols, Data base connectors to MS-SQL, MSDE and MS Access, Modbus Ethernet and Serial OPC Server, Runtime |
|
| GEN32V92-1500 |
Genesis 32 Automation Suite Version 9.2; Including: GraphWorX32, TrendWorX32, AlarmWorX32, Unfied Data Browser, ScriptWorX32, ProjectWorX32, Gen32-Symbols, Data base connectors to MS-SQL, MSDE and MS Access, Modbus Ethernet and Serial OPC Server, Runtime |
|
| GEN32V92-300 |
Genesis 32 Automation Suite Version 9.2; Including: GraphWorX32, TrendWorX32, AlarmWorX32, Unfied Data Browser, ScriptWorX32, ProjectWorX32, Gen32-Symbols, Data base connectors to MS-SQL, MSDE and MS Access, Modbus Ethernet and Serial OPC Server, Runtime |
|
| GEN32V92-500 |
Genesis 32 Automation Suite Version 9.2; Including: GraphWorX32, TrendWorX32, AlarmWorX32, Unfied Data Browser, ScriptWorX32, ProjectWorX32, Gen32-Symbols, Data base connectors to MS-SQL, MSDE and MS Access, Modbus Ethernet and Serial OPC Server, Runtime |
|
| GEN32V92-75 |
Genesis 32 Automation Suite Version 9.2; Including: GraphWorX32, TrendWorX32, AlarmWorX32, Unfied Data Browser, ScriptWorX32, ProjectWorX32, Gen32-Symbols, Data base connectors to MS-SQL, MSDE and MS Access, Modbus Ethernet and Serial OPC Server, Runtime |
|
| GEN64-HH-R-5000 V10 |
Genesis64 Redundant Hyper Historian V10; Two Genesis64 Hyper Historian Enterprise 5000 tags, BACnet, SNMP, Modbus OPC Server, Distributed Collectors, Store & Forward, Multi CPU. For Redundancy Applications. |
|
| GEN64-RT-1500 V10 |
Genesis64 Runtime V10; Genesis64 Runtime 1500 tags (On-Demand), Suite GraphWorX, AlarmWorX, TrendWorX, BACnet, SNMP, Modbus OPC Server |
|
| GEN64-RT-15000 V10 |
Genesis64 Runtime V10; Genesis64 Runtime 15000 tags (On-Demand), Suite GraphWorX, AlarmWorX, TrendWorX, BACnet, SNMP, Modbus OPC Server |
|
| GEN64-RT-500 V10 |
Genesis64 Runtime V10; Genesis64 Runtime 500 tags (On-Demand), Suite GraphWorX, AlarmWorX, TrendWorX, BACnet, SNMP, Modbus OPC Server |
|
| GRS-MEG-4-DBP-S-AC2-S1P |
GRS; Electric Gripper GRS-MEG-4-DBP-S-AC2-S1P
Electric Gripper Solenoid type
Outer diameter grip, drive to open, release to close
Max grip force 20N
Stroke 4mm (2mm per side)
Driver Box PNP 24Vdc
1x sensor attached PNP
Gripper flexible cable 2m
Dr |
|
| GRS-MEG-4-DBP-S-S2P |
GRS; Electric Gripper GRS-MEG-4-DBP-S-S2P
electric Gripper Solenoid type
Outer diameter grip, drive to open, release to close
Max grip force 20N
Stroke 4mm (2mm per side)
Driver Box PNP 24Vdc
2x sensor attached PNP
Gripper flexible cable 1m
Driver |
|
| GRS-SEG-4-DBP-S-AC2-S1P |
GRS; Electric Gripper GRS-SEG-4-DBP-S-AC2-S1P
Electric Gripper Solenoid type
Outer diameter grip, drive to open, release to close
Max grip force 10N
Stroke 4mm (2mm per side)
Driver Box PNP 24Vdc
1x sensor attached PNP
Gripper flexible cable 2m
Dr |
|
| GRS-SEG-4-DBP-S-S1P |
GRS; Electric Gripper GRS-SEG-4-DBP-S-S1P
electric Gripper Solenoid type
Outer diameter grip, drive to open, release to close
Max grip force 10N
Stroke 4mm (2mm per side)
Driver Box PNP 24Vdc
1x sensor attached PNP
Gripper flexible cable 1m
Driver |
|
| GRS-SEG-4-DBP-S-S2P |
GRS; Electric Gripper GRS-SEG-4-DBP-S-S2P
electric Gripper Solenoid type
Outer diameter grip, drive to open, release to close
Max grip force 10N
Stroke 4mm (2mm per side)
Driver Box PNP 24Vdc
2x sensor attached PNP
Gripper flexible cable 1m
Driver |
|
| GSX30-0301-MGA-RA3-158-30-SD-SS-RB |
GSX actuator; GSX 79 mm frame size, 3" stroke lengh, 0,1" lead, manufacturer's connector,rear clevis metric, male metric thread,standard incremental encoder AB MPL 75 mm circular, 1 stack 400 Vrms, 3000 RPM,Manual drive side hex, srtain steel, brake |
|
| GSX30-0301-MGB-RA3-158-RB-SD-SS-XH |
GSX actuator; GSX 79 mm frame size, 3" stroke lengh, 0,1" lead, manufacturer's connector,rear clevis metric, female metric thread,standard incremental encoder AB MPL 75 mm circular, 1 stack 400 Vrms, 3000 RPM,Manual drive side hex, stain steel, brake |
|
| GSX30-0301-MKA-RA3-158-30-RD-SS-RB |
GSX actuator; GSX 79 mm frame size, 3" stroke lengh, 0,1" lead, manufacturer's connector,side mount double metric, male metric thread,standard incremental encoder AB MPL 75 mm circular, 1 stack 400 Vrms, 3000 RPM,Manual drive rear, srtain steel, brake |
|
| GSX40-0601-MCR-KM4-258-30-AR-PF-RB-L3 |
GSX actuator; GSX40 linear actuator, 3.9" frame size, 6" stroke lengh, 0,1" lead, manufacturers connector (straight), rear clevis english mounting style, rod end male metric thread stainless steel, Kollmorgen absolute encoder, 2 stack 400 Vrms, motor spee |
|
| GSX40-0601-MCR-KM5-258-30-AR-RB-L3 |
GSX actuator; GSX40 linear actuator, 3.9" frame size, 6" stroke lengh, 0,1" lead, manufacturers connector (straight), rear clevis english mounting style, rod end male metric thread stainless steel, Kollmorgen resolver, 2 stack 400 Vrms, motor speed 3000 r |
|
| GSX40-1805-MQA-SM3-258-50-PF-RB |
GSX actuator; GSX 99 mm frame size, 18" stroke lengh, 0,5" lead, manufacturer's connector,side trunnion metric, male metric thread, Endat Heidenhein EQN 1325 multiturn absolute encoder, 2 stack 400 Vrms, 5000 RPM, preloaded follower, brake |
|
| GSX60-1003-BMB-SM8-358-24-PF-RD-XL- 65728 |
GSX actuator; GSX 178 mm frame size, 10" stroke length, 0,25" lead, Embedded flying 3 Ft , Extended tie rod metric M14x2, Rod end female metric, EQN425 encoder feedback for Siemens, 3 stack 8 pole 400 Vrms, 2400 RPM, Preloaded follower, Rear manual drive |
|
| GSX60-1005-BMB-SM8-358-24-PF-RD-XL- 65727 |
GSX actuator; GSX 178 mm frame size, 10" stroke length, 0,5" lead, Embedded flying 3 Ft , Extended tie rod metric M14x2, Rod end female metric, EQN425 encoder feedback for Siemens, 3 stack 8 pole 400 Vrms, 2400 RPM, Preloaded follower, Rear manual drive h |
|
| GWX64-APP-75 V10 |
GraphWorX64 Runtime&Development V10; GraphWorX64 Runtime&Development 75 tags (On-Demand), includes GridWorX and Modbus OPC Server |
|
| H-110-EU |
SEL; Super SEL Controller E/G EU Brake Box (2 axis) |
|
| H01-23x166/180 |
LINMOT H01; Lineal H-Guide with Ball Bearings, for P01-23x160, Stroke max 180mm |
|
| H01-23x166/280 |
LINMOT H01; Lineal H-Guide with Ball Bearings, for P01-23x160, Stroke max 280mm |
|
| H01-23x166/80 |
LINMOT H01; Lineal H-Guide with Ball Bearings, for P01-23x160, Stroke max 80mm |
|
| H01-23x166/80-GF |
LINMOT H01; Lineal H-Guide with Plain Bearings, for P01-23x160, Stroke max 80mm |
|
| H01-23x86/160 |
LINMOT H01; Lineal H-Guide with Ball Bearings, for P01-23x80, Stroke max 160mm |
|
| H01-23x86/60 |
LINMOT H01; Lineal H-Guide with Ball Bearings, for P01-23x80, Stroke max 60mm |
|
| H01-23x86/60-GF |
LINMOT H01; Lineal H-Guide with Plain Bearings, for P01-23x80, Stroke max 60mm |
|
| H01-37x166/180 |
LINMOT H01; Lineal H-Guide with Ball Bearings, for P01-37x120, Stroke max 180mm |
|
| H01-37x166/180-GF |
LINMOT H01; Lineal H-Guide with Plain Bearings, for P01-37x120, Stroke max 180mm |
|
| H01-37x166/80 |
LINMOT H01; Lineal H-Guide with Ball Bearings, for P01-37x120, Stroke max 80mm |
|
| H01-37x166/80-GF |
LINMOT H01; Lineal H-Guide with Plain Bearings, for P01-37x120, Stroke max 80mm |
|
| H01-48x250/120 |
LINMOT H01; Lineal H-Guide with Ball Bearings, for P01-48x240, Stroke max 120mm |
|
| H01-48x250/210 |
LINMOT H01; Lineal H-Guide with Ball Bearings, for P01-48x240, Stroke max 210mm |
|
| H01-48x250/210-GF |
LINMOT H01; Lineal H-Guide with Plain Bearings, for P01-48x240, Stroke max 210mm |
|
| H01-48x370/510 |
LINMOT H01; Lineal H-Guide with Ball Bearings, for P01-48x360, Stroke max 510mm |
|
| HA01-37/20-F |
LINMOT HA01; Wiper for H01 linear guide. Front wiper |
|
| HA01-48/28-F |
LINMOT HA01; Wiper for H01 linear guide. Front wiper |
|
| HB01-37 |
LINMOT ACCESORIOS; Pneumatic brake for H01 linear guide |
|
| HB01-48 |
LINMOT ACCESORIOS; Pneumatic brake for H01 linear guide |
|
| HC01-09/04 |
LINMOT F01; Centering sleeve D9x4mm |
|
| HCEP1024-0 |
Maestro - Memory Extension MM8M; MAESTRO MEMORY EXTENSION
1,0 MB EPROM |
|
| HCMAC1-0 |
Midi/M264/Multicontrol - Counter and Motion Control Modules; MAESTRO axis controller
Highly dynamic 1 axis controller
2.8 MHz, incr. or absolut, 32 bit
Encoder supply 5 to 24 VDC
2 digital inputs 24 VDC, 1 msec, sink
3 digital inputs 24 VDC, 10 msec, sink |
|
| HCMAESTRO-0 |
MAESTRO INDUSTRIAL COMPU; TER,0S-9/68000, 12 MHz |
|
| HCMCO3MC-1A |
Maestro - Processing modules; MAESTRO Coprocessor
OS-9/68030 MMU processor, 33 MHz, FPU
512 KB SRAM 16 bit, 10 MB DRAM 32 bit
1 MB FlashPROM, 1 PCMCIA interface
1 RS232/TTY interface
1 electrically isolated RS232/RS485
RS485: network-capable |
|
| HCMCOHDD-2 |
MAESTRO HARD DISK , AT,; 240 MB, 3 SLOTS |
|
| HCMDISC40R-1 |
MAESTRO SCSI HARD DISK,; 40 MB, 4 slots, |
|
| HCMFDD70S-0 |
MAESTRO FLOPPY DISK; DRIVE,2x3.5 inch,ser.I |
|
| HCMGC1-0 |
MAESTRO GRAPHIC CONTR.; 16 Col, 800x600, RGB |
|
| HCMM2M-0 |
MAESTRO MEMORY EXTENSION; BOARD "UL" |
|
| HCNT43-1 |
MAESTRO POWER SUPPLY; 24 VDC / 100 W |
|
| HCR169-0 |
Maestro - Module Racks; MULTI module rack for 16 PLC modules
11 of these slots support
MAESTRO modules |
|
| HCRA1024-0 |
Maestro - Memory Extension MM8M; MAESTRO plug-in memory, 1 MB SRAM |
|
| HELPRO-FanCoverKit_HP |
HELPRO Fan Cover Kit for HP; |
|
| HELPRO-ProximitySwitch |
HELPRO Proximity Switch; |
|
| HELPRO-ProximitySwitchCable |
HELPRO Proximity Switch Cable; |
|
| HLS-M-20-01 |
Linear Wire Transducer; HLS Encoder, stroke 2000mm, resolution 0.1mm |
|
| HLS-M-50-02 |
Linear Wire Transducer; HLS Encoder, stroke 5000mm, resolution 0.2mm |
|
| HLS-S-10-01 |
Linear Wire Transducer; HLS Encoder, stroke 1000mm, resolution 0.1mm |
|
| HLS-S-10-05 |
Linear Wire Transducer; HLS Encoder, stroke 1000mm, resolution 0.5mm |
|
| HOR |
Service; Hourly rate |
|
| HORDES |
Service; Travel Hourly rate |
|
| HP-2/4 |
HELPRO HP 2 die / 4 blow; |
|
| HP-4 |
HELPRO HP 4 blow header; |
|
| HP-5 |
HELPRO HP 5 blow header; |
|
| HP-6 |
HELPRO HP 6 blow header; |
|
| HPS-10 |
Linear Wire Transducer; HPS Potentiometer, stroke 1000mm, lineality 0.25%, power 2W |
|
| HPS-15 |
Linear Wire Transducer; HPS Potentiometer, stroke 1500mm, lineality 0.25%, power 2W |
|
| HPS-20 |
Linear Wire Transducer; HPS Potentiometer, HPS-M-20 Res. 5K, stroke 2000mm, lineality 0.25%, power 2W, spring return |
|
| HPS-M-10 |
Linear Wire Transducer; HPS10 Potentiometer, stroke 1000mm, lineality 0.30%, 5KOhm, power 2W |
|
| HPS-M-125 |
Linear Wire Transducer; HPS Potentiometer, stroke 1250mm, lineality 0.25%, power 2W |
|
| HPS-M-125-10V |
Linear Wire Transducer; HPS Potentiometer, stroke 1250mm, lineality 0.25%, power 2W, 0-10V analogue output signal(alim 15-30VDC) |
|
| HSET838-BGA-1 |
; ETX Heatsink for ET839 |
|
| HV01-23 |
LINMOT HV01; Fan cooling for H01-23 |
|
| HV01-37/48 |
LINMOT HV01; Fan cooling for H01-37/48 & PF01-48 |
|
| HW KEY-USB Blue |
Genesis HW key; Genesis64 USB Hardware Key. Hardware Copy Protection Key for Genesis64 and other ICONICS products Gen32 V8 or older |
|
| HW KEY-USB+ |
Genesis HW key; Genesis64 USB Hardware Key. Hardware Copy Protection Key for Genesis64 and other ICONICS products |
|
| HW KEY-USB+SIP |
System Integrator Programm; SIP hardware key - new Style USB version |
|
| HW-2109000007 |
; CODESYS Key |
|
| IA-101-TT-USB |
IA; PC software (CD) with USB Cable |
|
| IA-101-TTA-USB-ENG |
IA; PC software & communication cable, TTA |
|
| IA-101-X-MW/USB Software |
IA; Programming software for SEL controllers |
|
| IA-101-X-USB |
IA; PC software (CD) with USB Cable |
|
| IA-101-X-USBS-ENG |
IA; PC software & communication cable, PSEL, ASEL, SSEL, MSEL |
|
| IA-CV-USB |
Programming device; RS232C/USB converter |
|
| IACP4801-12G |
XSEL; XSEL Power Board <= 800 w Global |
|
| IACP4801-12S |
ERC2; Power Board <=800W Standard |
|
| IANT3204DV1 |
XSEL; Standard Device Net Board, HS code 84799080 |
|
| ICO360-SIP HW KEY-USB V10 |
System Integrator Programm; V10.5 ICO 360 SIP license for HW Key |
|
| ICO360-SIP SW KEY V10 |
System Integrator Programm; V10.5 ICO 360 SIP Software Key |
|
| ICO360-SIP-S-RENEWAL-V10 |
Genesis Upgrade; ICO360 SIP-S program renewal for V10 |
|
| IF-1102000005 |
; CODESYS OPC UA Server |
|
| IF-2303000007 |
; CODESYS Ethernet/IP Scanner (Master) SL |
|
| IF-SA1L-I-100-900-T2-S-AQ-CE |
; Single Axis robot, compact belt type, actuator width 90 mm, 100W, 900mm of stroke, incremental encoder, AQ seal, CE mark. |
|
| IK2-P6XBC21HHS-WA-40-20-PM1-3L-CTL-CTL |
IK-P6; Cartesian Robot IAI-IK P6 2 axis X-Y
IK2-P6XBC21HHS-WA-40-20-PM1-3L-CTL-CTL
Configuration XY
Axis X: RCP6-SA7C-WA-56P-16
Axis Y: RCP6-SA6R-WA-42P-12
Direction configuration XY format 1
Battery-less absolute encoder
Stroke axis X 400mm
Stro |
|
| IK2-P6XBF11HHS-WA-50-40-PM1-3L-CTL-CTL |
IK-P6; Cartesian Robot IAI-IK P6 2 axis X-Y
IK2-P6XBF11HHS-WA-50-40-PM1-3L-CTL-CTL
Configuration XY
Axis X: RCP6-WSA14R-WA-56P-16
Axis Y: RCP6-SA7R-WA-56P-16
Direction configuration XY format 1
Battery-less absolute encoder
Stroke axis X 500mm
St |
|
| IND-BLDAT-SA20 |
KEP Server support; for Building automation suite |
|
| IND-CLACE-SA20 |
KEP Server support; for clientAce |
|
| IND-MNFNG-SA20 |
KEP Server support; for Manufacturing suite |
|
| IND-ODBCI-SA20 |
KEP Server support; forODBCI suite |
|
| ISA-MXMX-I-200-20-1700-T2-S-EU |
ISA; Single-axis robot mid support; Medium X-axis type, actuator width 120mm, straight shape; Incremental encoder; 200 W motor; 20 mm pich; 1700 mm Travel; T2 Controller; 3 Mt standard cable no sensors, metallic conectors for EU |
|
| ISB-LXM-I-200-20-1200-T2-M-AQ-A3E-EU |
ISB; Single-axis robot; large X-axis type, actuator width 150mm; Incremental encoder; 200 W motor; 20 mm pich; 1200 mm Travel; T2 Controller; 5 Mt standard cable;Aq seal; Cable exit from the rear right; Metalic connector |
|
| ISB-LXMX-WA-400-20-1500-T2-M-AQ-A3E-EU |
ISB; Single-axis robot; large X-axis type, actuator width 150mm; Battery less absolute encoder; 400 W motor; 20 mm pich; 1500 mm Travel; T2 Controller; 5 Mt standard cable;Aq seal; Cable exit from rear right; Metalic connector |
|
| ISB-LXUWX-I-200-20-2000-T2-M-AQ-A1S-EU |
ISB; Single-axis robot; Large X-axis type, mid support type, double slider; actuator width 150mm; Incremental encoder; 200 W motor; 20 mm pich; 2000 mm Travel; T2 Controller; 5 Mt standard cable;Aq seal; Cable exit from the left; Metalic connector |
|
| ISB-MXM-I-100-5-1000-T2-M-AQ-A1S-EU |
ISB; Single-axis robot; Medium X-axis type, actuator width 120mm; Incremental encoder; 100 W motor; 5 mm pich; 1000 mm Travel; T2 Controller; 5 Mt standard cable;Aq seal; Cable exit from the left; Metalic connector |
|
| ISB-MXM-WA-100-20-400-T2-M-A1S-AQ-RT-EU |
ISB; Single-axis robot; Medium X-axis type, actuator width 120mm; Absolute encoder battery-less; 100W motor; 20mm pich; 400mm Travel; T2 Controller; 5m standard cable;Aq seal; Cable exit from the left; Guide with ball retain; EU connector |
|
| ISB-MXM-WA-100-5-100-T2-M-A3S-AQ-B-RT-EU |
ISB; Single-axis robot; Medium X-axis type, actuator width 120mm; Absolute encoder battery-less; 100W motor; 5mm pich; 100mm Travel; T2 Controller; 5m standard cable;Aq seal; Cable exit from the right; Brake; Guide with ball retain; EU connector |
|
| ISB-MXM-WA-200-20-250-T2-M-A1S-AQ-RT-EU |
ISB; Single-axis robot; Medium X-axis type, actuator width 120mm; Absolute encoder battery-less; 200W motor; 20mm pich; 250mm Travel; T2 Controller; 5m standard cable;Aq seal; Cable exit from the left; Guide with ball retain; EU connector |
|
| ISB-MXMX-I-200-20-2000-T2-M-AQ-A1S-EU |
ISB; Single-axis robot; Medium X-axis type, mid support type, actuator width 120mm; Incremental encoder; 200 W motor; 20 mm pich; 2000 mm Travel; T2 Controller; 5 Mt standard cable;Aq seal; Cable exit from the left; Metalic connector |
|
| ISDACR-L-I-200-10-100-T2-M-EU |
ISDA; Single-Axis Robot: Large Cleanroom Type, Actuator Width 155mm, 200W, Straight Shape, Incremental Encoder, 10mm pich, 100 mm stroke, T2 controller, 5Mts Robot cable, Metallic concetors |
|
| ISDACR-L-I-400-10-100-T1-M-EU-SP |
ISDA; Single-Axis Robot: Large Cleanroom Type, Actuator Width 155mm, 400W, Straight Shape, Incremental Encoder, 10mm pich, 100 mm stroke, T1 controller, 5Mts Robot cable, Metallic concetors |
|
| ISDACR-M-I-100-10-100-T2-M-EU |
ISDA; Single-Axis Robot: Medium Cleanroom Type, Actuator Width 125mm, 100W, Straight Shape, Incremental Encoder, 10mm pich, 100 mm stroke, T2 controller, 5Mts Robot cable, Metallic concetors |
|
| ISDACR-M-I-100-10-200-T2-M-EU |
ISDA; Single-Axis Robot: Medium Cleanroom Type, Actuator Width 125mm, 100W, Straight Shape, Incremental Encoder, 10mm pich, 200 mm stroke, T2 controller, 5Mts Robot cable, Metallic concetors |
|
| ISDACR-M-I-100-10-200-T2-X10-EU |
ISDA; Single-Axis Robot: Medium Cleanroom Type, Actuator Width 125mm, 100W, Straight Shape, Incremental Encoder, 10mm pich, 200 mm stroke, T2 controller, 10Mts Robot cable, Metallic concetors |
|
| ISDACR-M-I-100-5-100-T2-M-EU-AQ |
ISDA; Single-Axis Robot: Medium Cleanroom Type, Actuator Width 125mm, 100W, Straight Shape, Incremental Encoder, 5mm pich, 100 mm stroke, T2 controller, 5Mts Robot cable, Metallic concetors, Aq seal |
|
| ISDACR-M-I-200-20-600-T2-M-EU |
ISDA; Single-Axis Robot: Medium Cleanroom Type, Actuator Width 125mm, 200W, Straight Shape, Incremental Encoder, 20mm pich, 600 mm stroke, T2 controller, 5Mts Robot cable, Metallic concetors |
|
| ISDACR-M-I-200-20-700-T2-M-B-AQ-EU |
ISDA; Single-Axis Robot: Medium Cleanroom Type, Actuator Width 125mm, 200W, Straight Shape, Incremental Encoder, 20mm pich, 700 mm stroke, T2 controller, 5Mts Robot cable, Metallic concetors. Brake. AQSEAL |
|
| ISDACR-S A-Roller Assembly |
ISDA; ISDACR-S A-Roller Assembly |
|
| ISDACR-S B Roller |
ISDA; ISDACR-S B Roller |
|
| ISDACR-S B Roller Bearing |
ISDA; ISDACR-S B Roller Bearing |
|
| ISDACR-S B Roller Retailing Ring (E) |
ISDA; ISDACR-S B Roller Retailing Ring (E) |
|
| ISDACR-S-I-60-4-100-T2-M-EU-AQ |
ISDA; Single-Axis Robot: Compact Cleanroom Type, Actuator Width 94mm, 60W, Straight Shape, Incremental Encoder, 4mm pich, 100 mm stroke, T2 controller, 5Mts Robot cable, Metallic concetors, AQ seal |
|
| ISDACR-S-I-60-8-100-T2-M-EU |
ISDA; Single-Axis Robot: Compact Cleanroom Type, Actuator Width 94mm, 60W, Straight Shape, Incremental Encoder, 8mm pich, 100 mm stroke, T2 controller, 5Mts Robot cable, Metallic concetors |
|
| ISDACR-S-I-60-8-300-T2-M-EU |
ISDA; Single-Axis Robot: Compact Cleanroom Type, Actuator Width 94mm, 60W, Straight Shape, Incremental Encoder, 8mm pich, 300 mm stroke, T2 controller, 5Mts Robot cable, Metallic concetors |
|
| ISDACR-W-I-600-20-800-T2-M-B-AQ-EU L-SP |
ISDA; Single-Axis Robot: Medium Cleanroom Type, Actuator Width 198mm, 600W, Straight Shape, Incremental Encoder, 20mm pich, 800 mm stroke, T2 controller, 5Mts Robot cable, Metallic concetors; Brake; AQSEAL |
|
| ISDBCR-M-I-200-10-200-T2-M-A1E-AQ-EU |
ISDBCR; Single-Axis Robot: Compact Cleanroom Type, Actuator Width 120mm, 200W, Straight Shape, Incremental Encoder, 10mm pich, 200 mm stroke, T2 controller, 5 Mts Robot cable, Metallic conectors, AQ seal, Cable exit from the rear left |
|
| ISDBCR-S-I-60-4-200-T2-M-EU-B-AQ-A1E |
ISDBCR; Single-Axis Robot: Compact Cleanroom Type, Actuator Width 90mm, 60W, Straight Shape, Incremental Encoder, 4mm pich, 200 mm stroke, T2 controller, 5 Mts Robot cable, Brake, Metallic concetors, AQ seal, Cable exit from the rear left |
|
| ISDBCR-S-I-60-4-200-T2-S-EU-B-AQ-A1E |
ISDBCR; Single-Axis Robot: Compact Cleanroom Type, Actuator Width 90mm, 60W, Straight Shape, Incremental Encoder, 4mm pich, 200 mm stroke, T2 controller, 3 Mts Robot cable, Brake, Metallic concetors, AQ seal, Cable exit from the rear left |
|
| ISDBCR-S-I-60-8-400-T2-M-A1E-AQ-EU |
ISDBCR; Single-Axis Robot: Compact Cleanroom Type, Actuator Width 90mm, 60W, Straight Shape, Incremental Encoder, 8mm pich, 400 mm stroke, T2 controller, 5 Mts Robot cable, Metallic conectors, AQ seal, Cable exit from the rear left |
|
| IX-FL-1 |
Flange; Flange for IXA (NNN non applicable) |
|
| IXA-4NSN4518-5L-T2 |
Scara; High-Power SCARA robot; High Speed; Arm length 450mm; Vertical axis stroke 180mm; 3 axis plus rotary axis, servo motor; Cable length 5m; XSEL-RAX/SAX controller |
|
| IXP-3N3515-WA-M-P3 |
Scara; Power con SCARA robot; Arm length 350mm; Vertical axis stroke 150mm;3 axis, pulse motor; Cable length 5m; MSEL-PGX3 controller |
|
| IXP-4N2508-WA-M-P3 |
Scara; Power con SCARA robot; Arm length 250mm; Vertical axis stroke 80mm;3 axis plus rotary axis, pulse motor; Cable length 5m; MSEL-PGX4 controller |
|
| IXP-4N4515-WA-M-P3 |
Scara; Power con SCARA robot; Arm length 450mm; Vertical axis stroke 150mm;3 axis plus rotary axis, pulse motor; Cable length 5m; MSEL-PGX4 controller |
|
| IXP-4N5520-WA-M-P3 |
Scara; Power con SCARA robot; Arm length 550mm; Vertical axis stroke 200mm;3 axis plus rotary axis, pulse motor; Cable length 5m; MSEL-PGX4 controller |
|
| K-Roset-ARC-E |
; Kawasaki offline robot simulation software, K-Roset for Arc welding applications |
|
| K-Roset-HAND-E |
; Kawasaki offline robot simulation software, K-Roset for handling applications |
|
| K-Roset-Multi |
; Kawasaki offline robot simulation software, K-Roset Multi for arc welding, servo control, handling and painting applications |
|
| K-Roset-Multi + K-SPARC |
; Kawasaki offline robot simulation software plus K-Sparc palletizing software, K-Roset Multi for arc welding, servo control, handling and painting applications |
|
| K-Roset-PAINT-E |
; Kawasaki offline robot simulation software, K-Roset for painting applications |
|
| K-SPARC-E-UPG |
; Kawasaki offline robot simulation software K-Sparc palletizing software upgrade, it requires K-Roset Multi previous license. |
|
| K05-04/05 |
LINMOT K05; Standard Cable per m |
|
| K05-04/05-100 |
LINMOT K05; Standard Cable 100m roll |
|
| K05-04/05-200 |
LINMOT K05; Standard Cable 200m roll |
|
| K05-D/C-8 |
LINMOT K05; Standard Cable D/C, 8m |
|
| K05-D/D-2 |
LINMOT K05; Standard Cable D/D, 2m |
|
| K05-D/R-2 |
LINMOT K05; Standard Cable D/R, 2m |
|
| K05-D/R-8 |
LINMOT K05; Standard Cable D/R, 8m |
|
| K05-P/C-10 |
LINMOT K05; Special Motor cable P/C 10m. |
|
| K05-P/P-8 |
LINMOT K05; Motor cable P/P 8m. |
|
| K05-W/C-10 |
LINMOT K05; Special Cable W/C, 10m |
|
| K05-W/C-2 |
LINMOT K05; Standard Cable W/C, 2m |
|
| K05-W/C-4 |
LINMOT K05; Standard Cable W/C, 4m |
|
| K05-W/C-6 |
LINMOT K05; Standard Cable W/C, 6m |
|
| K05-W/R-2 |
LINMOT K05; Standard Cable W/R, 2m |
|
| K05-W/R-4 |
LINMOT K05; Standard Cable W/R, 4m |
|
| K05-W/R-6 |
LINMOT K05; Standard Cable W/R, 6m |
|
| K05-W/R-8 |
LINMOT K05; Standard Cable W/R, 8m |
|
| K05-Y-Fe/C-10 |
LINMOT K05; Special Cable Y-Fe/C, 10m |
|
| K05-Y-Fe/R-10 |
LINMOT K05; Special Cable Y-Fe/R, 10m |
|
| K05-Y-Fe/R-12 |
LINMOT K05; Special Cable Y-Fe/R, 12m |
|
| K05-Y-Fe/R-15 |
LINMOT K05; Special Cable Y-Fe/R, 15m |
|
| K05-Y-Fe/R-25 |
LINMOT K05; Special Cable Y-Fe/R, 25m |
|
| K05-Y-Fe/R-28 |
LINMOT K05; Special Cable Y-Fe/R, 28m |
|
| K05-Y/C-2 |
LINMOT K05; Standard Cable Y/C, 2m |
|
| K05-Y/C-4 |
LINMOT K05; Standard Cable Y/C, 4m |
|
| K05-Y/C-6 |
LINMOT K05; Standard Cable Y/C, 6m |
|
| K05-Y/C-8 |
LINMOT K05; Standard Cable Y/C, 8m |
|
| K05-Y/R-2 |
LINMOT K05; Standard Cable Y/R, 2m |
|
| K05-Y/R-4 |
LINMOT K05; Standard Cable Y/R, 4m |
|
| K05-Y/R-6 |
LINMOT K05; Standard Cable Y/R, 6m |
|
| K05-Y/R-8 |
LINMOT K05; Standard Cable Y/R, 8m |
|
| K15-04/05 |
LINMOT K15; Standard Cable per m |
|
| K15-04/05-100 |
LINMOT K15; Standard Cable 100m roll |
|
| K15-W/C-4 |
LINMOT K15; Standard Cable W/C, 4m |
|
| K15-W/C-6 |
LINMOT K15; Standard Cable W/C, 6m |
|
| K15-W/C-8 |
LINMOT K15; Standard Cable W/C, 8m |
|
| K15-Y-Fe/C-10 |
LINMOT K15; Special Cable Y-Fe/C, 10m |
|
| K15-Y-Fe/C-15 |
LINMOT K15; Special Cable Y-Fe/C, 15m |
|
| K15-Y-Fe/C-20 |
LINMOT K15; Special Cable Y-Fe/C, 20m |
|
| K15-Y-Fe/C-25 |
LINMOT K15; Special Cable Y-Fe/C, 25m |
|
| K15-Y-Fe/C-30 |
LINMOT K15; Special Cable Y-Fe/C, 30m |
|
| K15-Y-Fe/C-SSC-10 |
LINMOT K15; Special Cable Y-Fe/C-SSC, 10m |
|
| K15-Y-Fe/C-SSC-20 |
LINMOT K15; Special Cable Y-Fe/C-SSC, 20m |
|
| K15-Y-Fe/C-SSC-25 |
LINMOT K15; Special Cable Y-Fe/C-SSC, 25m |
|
| K15-Y/C-2 |
LINMOT K15; Standard Cable Y/C, 2m |
|
| K15-Y/C-4 |
LINMOT K15; Standard Cable Y/C, 4m |
|
| K15-Y/C-6 |
LINMOT K15; Standard Cable Y/C, 6m |
|
| K15-Y/C-8 |
LINMOT K15; Standard Cable Y/C, 8m |
|
| KM |
Service; Car expenses for each Km |
|
| KPS07-04/02-L/Tk-3 |
LINMOT KPS07; High Flex Cable Power L/Tk, 3m |
|
| KPS15-04-..../Q-10 |
LINMOT KPS15; Power trailing chain cable .../Q, for LinMot Linear Motors P10-...-D0x, 10m |
|
| KPS15-04-L/Q-12 |
LINMOT KPS15; High Flex Cable Power L/Q, 12m |
|
| KPS15-04-L/Q-15 |
LINMOT KPS15; High Flex Special Cable Power L/Q, 15m |
|
| KPS15-04-L/Q-3 |
LINMOT KPS15; High Flex Cable Power L/Q, 3m |
|
| KPS15-04-L/Q-40 |
LINMOT KPS15; High Flex Special Cable Power L/Q, 40m |
|
| KPS15-04-L/Q-5 |
LINMOT KPS15; High Flex Cable Power L/Q, 5m |
|
| KPS15-04-L/Q-8 |
LINMOT KPS15; High Flex Cable Power L/Q, 8m |
|
| KR03-R/K-2 |
LINMOT KR03; Special Robot Cable R/K, 2m |
|
| KR03-Y-Fe/K-3 |
LINMOT KR03; Special Robot Cable Y-Fe/K, 3m |
|
| KR05-04/05 |
LINMOT KR05; Robot Cable per m |
|
| KR05-R/R-3 |
LINMOT KR05; Special Robot Cable R/R, 3m |
|
| KS03-R/K-1 |
LINMOT KS03; High Flex Cable R/K, 1m |
|
| KS03-W-Fe/K-2 |
LINMOT KS03; High Flex Cable W/K, 2m |
|
| KS03-W-Fe/K-4 |
LINMOT KS03; High Flex Cable W/K, 4m |
|
| KS03-W-Fe/K-6 |
LINMOT KS03; High Flex Cable W/K, 6m |
|
| KS03-Y-Fe/K-0.5 |
LINMOT KS03; High Flex Cable Y/K, 0.5m |
|
| KS03-Y-Fe/K-2 |
LINMOT KS03; High Flex Cable Y/K, 2m |
|
| KS03-Y-Fe/K-4 |
LINMOT KS03; High Flex Cable Y/K, 4m |
|
| KS03-Y-Fe/K-6 |
LINMOT KS03; High Flex Cable Y/K, 6m |
|
| KS03-Y/H-4 |
LINMOT KS03; High Flex Cable Y/H, 4m |
|
| KS05-04/05 |
LINMOT KS05; High Flex Cable per m |
|
| KS05-04/05-100 |
LINMOT KS05; High Flex Cable 100m roll |
|
| KS05-04/06-Y-Fe/Uk-2 |
LINMOT KS05; High Flex Cable Y/Uk, 2m |
|
| KS05-C/C-2 |
LINMOT KS05; High Flex Special Cable C/C, 2m |
|
| KS05-D/R-2 |
LINMOT KS05; High Flex Cable D/R, 2m |
|
| KS05-D/R-4 |
LINMOT KS05; High Flex Cable D/R, 4m |
|
| KS05-D/R-6 |
LINMOT KS05; High Flex Cable D/R, 6m |
|
| KS05-W/N-2 |
LINMOT KS05; High Flex Cable W/N, 2m |
|
| KS05-W/N-6 |
LINMOT KS05; High Flex Cable W/N, 6m |
|
| KS05-W/R-4 |
LINMOT KS05; High Flex Cable W/R, 4m |
|
| KS05-W/R-6 |
LINMOT KS05; High Flex Cable W/R, 6m |
|
| KS05-Y-Fe/C-13 |
LINMOT KS05; High Flex Special Cable Y-Fe/C, 13m |
|
| KS05-Y-Fe/N-10 |
LINMOT KS05; High Flex Special Cable Y-Fe/N, 10m |
|
| KS05-Y-Fe/N-15 |
LINMOT KS05; High Flex Special Cable Y-Fe/N, 15m |
|
| KS05-Y-Fe/R-13 |
LINMOT KS05; High Flex Special Cable Y-Fe/R, 13m |
|
| KS05-Y/C-4 |
LINMOT KS05; High Flex Cable Y/C, 4m |
|
| KS05-Y/C-6 |
LINMOT KS05; High Flex Cable Y/C, 6m |
|
| KS05-Y/R-4 |
LINMOT KS05; High Flex Cable Y/R, 4m |
|
| KS05-Y/R-6 |
LINMOT KS05; High Flex Cable Y/R, 6m |
|
| KS05-Y/R-8 |
LINMOT KS05; High Flex Cable Y/R, 8m |
|
| KS10-04/05 |
LINMOT KS10; High Flex Cable per m |
|
| KS10-04/05-100 |
LINMOT KS10; High Flex Cable 100m roll |
|
| KS10-C/C-8 |
LINMOT KS10; Special High Flex Cable C/C, 8m |
|
| KS10-D/D-14 |
LINMOT KS10; High Flex Special Cable D/D, 14m |
|
| KS10-W/C-10 |
LINMOT KS10; Special Cable W/C, 10m |
|
| KS10-W/C-4 |
LINMOT KS10; High Flex Cable W/C, 4m |
|
| KS10-W/C-5 |
LINMOT KS10; High Flex Cable W/C, 5m |
|
| KS10-W/C-6 |
LINMOT KS10; High Flex Cable W/C, 6m |
|
| KS10-W/C-8 |
LINMOT KS10; High Flex Cable W/C, 8m |
|
| KS10-Y-Fe/C-10 |
LINMOT KS10; Special Cable Y-Fe/C, 10m |
|
| KS10-Y-Fe/C-15 |
LINMOT KS10; High Flex Special Cable Y-Fe/C, 15m |
|
| KS10-Y/C-4 |
LINMOT KS10; High Flex Cable Y/C, 4m |
|
| KS10-Y/C-6 |
LINMOT KS10; High Flex Cable Y/C, 6m |
|
| KS10-Y/C-8 |
LINMOT KS10; High Flex Cable Y/C, 8m |
|
| KSS01-12-D15/ABS-ENC-10 |
LINMOT KSS01; Special cable for MS01-1/D-SSI on C1100/C1200/C1400/E1200/E1400 Drives, up to 10m |
|
| KSS01-12-D15/ABS-ENC-8 |
LINMOT KSS01; Special cable for MS01-1/D-SSI on C1100/C1200/C1400/E1200/E1400 Drives, 8m |
|
| KSS01-12…/ABS-ENC-10 |
LINMOT KSS01; High Flex Cable Sensor MS01-1/D-SSI, 10m |
|
| KSS02-08-./M12A8-10 |
LINMOT KSS02; Sensor cable for PR02, 10m, open cable end |
|
| KSS05-02/08-D15(f)-45°/J-15 |
LINMOT KSS05; High Flex Special Cable Sensor D15-45°/J, 15m |
|
| KSS05-02/08-D15(f)-45°/J-40 |
LINMOT KSS05; High Flex Special Cable Sensor D15-45°/J, 40m |
|
| KSS05-02/08-D15/J-12 |
LINMOT KSS05; High Flex Cable Sensor D15/J, 12m |
|
| KSS05-02/08-D15/J-3 |
LINMOT KSS05; High Flex Cable Sensor D15/J, 3m |
|
| KSS05-02/08-D15/J-5 |
LINMOT KSS05; High Flex Cable Sensor D15/J, 5m |
|
| KSS05-02/08-D15/J-8 |
LINMOT KSS05; High Flex Cable Sensor D15/J, 8m |
|
| KSS05-02/08-D15s/Uk-3 |
LINMOT KSS05; High Flex Cable Sensor D15s/Uk, 3m |
|
| KSS05-02/13-./J-10 |
LINMOT KSS05; Encoder trailing chain cable .../J, for LinMot Linear Motors P10x70, 10m |
|
| KWM-ABSTE0-ATT |
; One year technical support for ALLEN BRADLEY. (Mandatory for year-one, starting on 15-nov-2016) |
|
| KWM-BCNET0-ATT |
KEP Server support; One year technical support for BACNET/IP. (Mandatory for year-one, starting on 15-nov-2016) |
|
| KWM-CLACE0-RCP |
KEP Server support; One year technical support for ClientAce. (After expiring the warranty) |
|
| KWM-GEFCS0-ATT |
; One year technical support for FANUC FOCAS. (Mandatory for year-one, starting on 15-nov-2016) |
|
| KWM-MDBUS0-ATT |
; One year technical support for MODBUS. (Mandatory for year-one, starting on 15-nov-2016) |
|
| KWM-MNFNG0-RCP |
; One year technical support for MANUFACTURING SUITE (After expiring the warranty) |
|
| KWM-ODBCI0-ATT |
; One year technical support for ODBC. (Mandatory for year-one, starting on 15-nov-2016) |
|
| KWM-OMRNF0-ATT |
; One year technical support for OMRON. (Mandatory for year-one, starting on 15-nov-2016) |
|
| KWM-OMRNF0-RCP |
; One year technical support for OMRON (After expiring the warranty) |
|
| KWM-SIEMS0-ATT |
KEP Server support; One year technical support for SIEMENS. (Mandatory for year-one, starting on 15-nov-2016) |
|
| KWM-SIEMS0-RCP |
; One year technical support for SIEMENS (After expiring the warranty) |
|
| KWP-ABSTE0-PRD |
; OPC server for ALLEN BRADLEY, KepServerEX v6 |
|
| KWP-BCNET0-PRD |
KEP Server Ex driver version 6; OPC server for BACnet /IP, KepServerEX v6 |
|
| KWP-GEFCS0-PRD |
; OPC server for FANUC FOCAS, KepServerEX v6 |
|
| KWP-MDBUS0-PRD |
; OPC server for MODBUS, KepServerEX v6 |
|
| KWP-MNFNG0-PRD |
KEP Server Ex driver version 6; OPC server for Manufacturing Suite, KepServerEX v6 |
|
| KWP-ODBCI0-PRD |
; OPC server for ODBC, KepServerEX v6 |
|
| KWP-OMRNF0-PRD |
; OPC server for OMRON, KepServerEX v6 |
|
| KWP-SIEMS0-PRD |
KEP Server Ex driver version 6; OPC server for SIEMENS, KepServerEX v6 |
|
| LA2P-100-F |
; Conventional actuator, 24 Vdc 3 Amps 25% dutty, 100 mm stroke, reduction type: Fast |
|
| LA2P-100F-ELS50 |
; Conventional actuator, 24 Vdc 3 Amps 25% dutty, 100 mm stroke, reduction type: Fast, external limit switch |
|
| LA2P-100S-ELS50 |
Linear actuator; Conventional actuator, 24 Vdc 3 Amps 25% dutty, 100 mm stroke, reduction type: Slow, external limit switch, position trasnducer 50 ppmm |
|
| LA2P-200-F |
Linear actuator; Conventional actuator, 24 Vdc 3 Amps 25% dutty, 200 mm stroke, reduction type: Fast |
|
| LA2P-200F-ELS50 |
Linear actuator; Conventional actuator, 24 Vdc 3 Amps 25% dutty, 200 mm stroke, reduction type: Fast; Position trasnducer 50 ppmm |
|
| LA2P-200M-POS |
Linear actuator; Conventional actuator, 24 Vdc 3 Amps 25% dutty, 100 mm stroke, reduction type: Medium external limit switch, Driver 24 Vdc |
|
| LA2P-300F-ILS50 |
Linear actuator; Conventional actuator, 24 Vdc 3 Amps 25% dutty, 300 mm stroke, reduction type: Fast, internal limit switch, position trasnducer 50 ppmm |
|
| LAC-1 |
LAC series; High speed controller, single axis. Built in amplifier |
|
| LAC-25 |
LAC series; High speed controller, dual axis. Built in amplifier |
|
| LAH-LTD26-03 |
LAL series Cables; Two LAL linear actuator to LAC-25 controller, 3 Mts |
|
| LAH-LTD26-05 |
LAL series Cables; Two LAL linear actuator to LAC-25 controller, 5 Mts |
|
| LAH-LTD26-10 |
LAL series Cables; Two LAL linear actuator to LAC-25 controller, 10 Mts |
|
| LAH-RTD-05 |
La series Cables; Rotary actuator to LAC-25, 5 Mts |
|
| LAH-RTD-10 |
La series Cables; Rotary actuator to LAC-25, 10 Mts |
|
| LAH-RTD26-03 |
LA series Cables; Linear and rotary actuator to LAC-25, 3 Mts |
|
| LAL20-015-55-1-F |
LAL series; Linear actuator, (115x20)mm shaft, 15mm stroke, 24 Volts, single coil, 0,5 micron encoder, female shaft |
|
| LAL95-015-70-1-F |
LAL series; Linear actuator, (70x95)mm shaft, 15mm stroke, 48 Volts, single coil, 0,5 micron encoder, female shaft |
|
| LAL95-015-75-1-F |
LAL series; Linear actuator, (70x95)mm shaft, 15mm stroke, 48 Volts, single coil, 5 micron encoder, female shaft |
|
| LAR15-015-55-1-F |
LA series; Linear/Rotary Actuator, 15mm stroke, 24 volts single coil, 13mm Micomo motor, Gurley 20k rotary encoder, female shaft |
|
| LAR35-050-55-1-FS MOD2277 |
LA series; Linear/Rotary Actuator, 50mm stroke, 24 volts single coil, ,Gurley 20k rotary encoder, female shaft, spring for vertical mount |
|
| LAR55-050-75-1-F |
LA series; Linear/Rotary Actuator, 50mm stroke, 48 volts, female shaft |
|
| LAR55-050-75MS |
LA series; Linear/Rotary Actuator, 50mm stroke, 48 volts with return spring |
|
| LAR55-100-75-F MOD 3419 |
LA series; Linear/Rotary Actuator, 100mm stroke, 48 volts,with 1:4,8 Gearbox MAXON Motor MOD 3419 |
|
| LC-4 |
HELPRO LC 4 blow header; |
|
| LC-DB |
HELPRO LC 1 die / 2 blow; |
|
| LC-T |
HELPRO LC Flat die threader; |
|
| LCA25-010-51-M-SB |
LC series; Linear actuator, 10mm stroke, 24 Volts, single coil, 1 micron encoder, spring, 50g payload, vertical, full return |
|
| LCA25-010-55-M5-SA MOD:3297 |
LCA Series; Linear Actuator, 10mm stroke, 24 volts, single phase, 5 micron encoder, single coil, male shaft, 0 gr payload vertical full return, Pigtail. |
|
| LCA25-025-12-M-SE |
LC series; Linear actuator, 25mm stroke, 24 Volts, 6 coil,0,1micron encoder, spring, 50 gr payload, vertical, counter balance. |
|
| LCA25-025-55-2-MSA5 |
LCA Series; Linear Actuator, 25mm stroke, 24 volts, single phase, 5 micron encoder, double coil, male shaft, 0 gr payload vertical full return, Pigtail. |
|
| LCB25-015-55-2-F3 |
LCB; Linear Actuator, 15mm stroke, 24 volts, single phase, 5 micron encoder, double coil, female shaft end, flying lead cable |
|
| LCC-10 |
LCC; Single axis brushless controller Built-in amplifier, 10 bit analogue output |
|
| LCC-11 |
LCC; Single axis brushless controller built-in amplifier, 16 bit analogue output |
|
| LCC-Opto Board |
Option; Connects the LCC digital I/O’s to the 24V PLC I/O |
|
| LEICB01 |
LEICB01 Carrier Board; LEICB01 Carrier Board |
|
| LEICB02 |
LEICB02 Carrier Board; LEICB02 Carrier Board |
|
| LEIcbox_ELECYLINDER |
; Módulo simulador IO-s digitales para actuadores IAI ELECYLINDER |
|
| LEIcbox_xCON |
; Módulo simulador IO-s digitales para controladores IAI xCON |
|
| LEIKB01 |
LEIKB01 HMI Board; LEIKB01 HMI Board |
|
| LEIKB01revA |
LEIKB01 HMI Board Revision A; LEIKB01 HMI Board Revision A |
|
| LEIKB01revB |
LEIKB01 HMI Board Revision B; LEIKB01 HMI Board Revision B |
|
| LEIKB02 |
LEIKB02 HMI Board; LEIKB02 HMI Board |
|
| LEIKB02revB |
LEIKB02 HMI Board Revision B; LEIKB02 HMI Board Revision B |
|
| LEIKB03revA |
LEIKB03 HMI Board Revision A; LEIKB03 HMI Board Revision A |
|
| LEIKB03revB |
LEIKB03 HMI Board Revision B; LEIKB03 HMI Board Revision B |
|
| LPC-609-01 |
LPC16 process control; LPC16 Controlador de procesos para una estación, caja, tarjeta procesadora y convertidor DC-DC |
|
| LPC16-Sensor PZT |
LPC16 process control; LPC16 Controlador de procesos, sensor de esfuerzo. |
|
| LPC16-Set preparación |
LPC16 process control; Set preparation. |
|
| LPC16A2V1.1 |
LPC16 process control; Control station module |
|
| LPC16PSV1.0 |
LPC16 Módulo alimentación; LPC16 Módulo alimentación |
|
| LPC2G-HMI |
LPC2G Controlador de procesos; LPC2G Controlador de procesos, set HMI compuesto por Terminal 10.4" color táctil y baliza. |
|
| LPC2G-HMI-Soporte boltmaker |
LPC2G Controlador de procesos; LPC2G Controlador de procesos, soporte LPC2G-HMI modo boltmaker. |
|
| LPC2G-Llave Sensor PZT |
LPC2G Controlador de procesos; LPC2G Controlador de procesos, llave de sensor de esfuerzo LPC16 Sensor PZT. |
|
| LPC2G-Set control-1:2st |
LPC2G Controlador de procesos; LPC2G Controlador de procesos, set control máquina compuesto por control 2 estaciones (módulo LPC16A2V1.1, sensor PZT, caja), detector de flanco y cableado. |
|
| LPC2G-Set control-1st |
LPC2G Controlador de procesos; LPC2G Controlador de procesos, set control máquina compuesto por control 1 estación (módulo LPC16A2V1.1, sensor PZT, caja), detector de flanco y cableado. |
|
| LPC2G-Set control-2st |
LPC2G Controlador de procesos; LPC2G Controlador de procesos, set control máquina compuesto por control 2 estaciones (módulo LPC16A2V1.1, sensor PZT, caja), detector de flanco y cableado. |
|
| LPC2G-Set control-3st |
LPC2G Controlador de procesos; LPC2G Controlador de procesos, set control máquina compuesto por control 3 estaciones (módulo LPC16A2V1.1, sensor PZT, caja), detector de flanco y cableado. |
|
| LPC2G-Set control-4st |
LPC2G Controlador de procesos; LPC2G Controlador de procesos, set control máquina compuesto por control 4 estaciones (módulo LPC16A2V1.1, sensor PZT, caja), detector de flanco y cableado. |
|
| LPC2G-Set control-5st |
LPC2G Controlador de procesos; LPC2G Controlador de procesos, set control máquina compuesto por control 5 estaciones (módulo LPC16A2V1.1, sensor PZT, caja), detector de flanco y cableado. |
|
| LPC2G-Set control-6st |
LPC2G Controlador de procesos; LPC2G Controlador de procesos, set control máquina compuesto por control 6 estaciones (módulo LPC16A2V1.1, sensor PZT, caja), detector de flanco y cableado. |
|
| LPC4G-HMI |
LPC4G Controlador de procesos; LPC4G Terminal HMI
1x Interfaz 15,6", multi-táctil, color
Cuerpo acero inoxidable
Amarre a escuadra
Salidas digitales 4, Entradas digitales 2
Alimentación 24Vdc
1x Baliza led rojo - verde
1x Escuadra a |
|
| LPC4G-Set control-1:2st |
LPC4G Controlador de procesos; LPC4G Módulo de adquisión para LPC4G-1:2
1x LPCprocessor
1x LPCrack
1x LPC16-Sensor-PZT
2x Detector PNP + cable
1x Caja centralizadora DIECAST
1x Set de cables |
|
| LPC4G-Set control-2:4st |
LPC4G Controlador de procesos; LPC4G Módulo de adquisión para LPC4G-2:4
2x LPCprocessor
1x LPCrack
2x LPC16-Sensor-PZT
2x Detector PNP + cable
1x Caja centralizadora DIECAST
1x Set de cables |
|
| LPC4G-Set control-5st |
LPC4G Controlador de procesos; LPC4G Módulo de adquisión para LPC4G-5
5x LPCprocessor
1x LPCrack
5x LPC16-Sensor-PZT
1x Detector PNP + cable
1x Caja centralizadora DIECAST
1x Set de cables |
|
| LPC4G-Set control-6st |
LPC4G Controlador de procesos; LPC4G Módulo de adquisión para LPC4G-6
6x LPCprocessor
1x LPCrack
6x LPC16-Sensor-PZT
1x Detector PNP + cable
1x Caja centralizadora DIECAST
1x Set de cables |
|
| LPCSEN-609-01 |
LPC16 process control; LPC16 Sensores, sensor PZT en placa soporte modelo SASPI (no incluida), cable PTF de 2 Mts y sellado epoxídico del conjunto |
|
| LU02-1000 |
Lubricant for standard linear motors; 1000ml pack |
|
| LU02-50 |
Lubricant for standard linear motors; 50ml pack |
|
| LU07-400 |
Interflon food grease 2 for SSC linear motors; 400ml pack |
|
| M-ISA-IAA200L-TC-CO |
; M-ISA-IAA200L-TC-CO 200W Motor Including Encoder unit with coupling |
|
| M-ISA-IAA200M-TC-CO |
; M-ISA-IAA200M-TC-CO 200W Motor Including Encoder unit with coupling |
|
| M-ISA-IAA200M-TC-CO-BT |
; M-ISA-IAA200M-TC-CO-BT 200W Motor Including Encoder unit with coupling |
|
| M-ISA-IAA400-TC-CO |
IA; Motor replacement for ROBO cylinder ISA-M; 400 W servo motor 220 AC |
|
| M-P2SA7C-IAP56N-MB-CO |
; Motor for RCP2-SA7C-I-56P-8-800-P1-S |
|
| M-S2SA7C-IAA060U-TC-CO-D-EU |
; M-S2SA7C-IAA060-TC-CO-D-EU 60W Motor including Encoder unit with coupling |
|
| M-S2SS8C-IAA100-TC-CO-D |
; M-S2SS8C-IAA100-TC-CO-D 100W Motor including Encoder unit with coupling |
|
| M2NTCP33-0 |
Midi/M264/Multicontrol - CPU Systems; M264 CPU/power supply module
24 VDC, 50 W
With extended diagnostics functions
CPU type A
With application memory EE32
16 KByte EEPROM
16 KByte SRAM for 4.7 KB instructions
1 TTY online interface with
electrically isol |
|
| M2NTCP63-0 |
Midi/M264/Multicontrol - CPU Systems; M264 CPU/power supply module
24 VDC, 50 W
With extended diagnostics functions
CPU type B
42 KByte SRAM for 42 KB instructions
Order PROM application memory separately
1 TTY online interface with
electrically isolated |
|
| M2NTCP64-0 |
Midi/M264/Multicontrol - CPU Systems; M264 CPU/power supply module
240 VAC, 60 W
With extended diagnostics functions
CPU type B
42 KByte SRAM for 42 KB instructions
Order PROM application memory separately
1 TTY online interface with
electrically isolated |
|
| M2R111-0 |
Midi/M264/Multicontrol - Module Racks; M264 module rack for 11 PLC modules
5 of these slots support P modules
4 slots support parallel processor PP60 |
|
| M55-S-K5-T07-E53 |
DC Servo motors; Servomotor with “M55, S55, K50, P50, C62, T07, E53, A50, G62, W51, SPL”Autocon Esp., your offer: LARR001 |
|
| MA01-20/H23 |
LINMOT MA01; Adaptor MagString M01-20 for guides H01-23 |
|
| MA01-37/H37 |
LINMOT MA01; Adaptor MagString M01-37 for guides H01-37 & B01-37 |
|
| MA01-37/H48 |
LINMOT MA01; Adaptor MagString M01-37 for guides H01-48 & B01-48 |
|
| MA01-PR01-52-37/20 |
LINROT ACCESORIES; MagSpring Adaptor for Lineal-Rotary Motor PR01-52x60 |
|
| MA01-PR01-52x40-37 |
LINROT ACCESORIES; MagSpring Adaptor for Lineal-Rotary Motor PR01-52x60 |
|
| MA01-PR01-84x80-37-1 |
LINROT ACCESORIES; MagSpring Adaptor UNO for Lineal-Rotary Motor PR01-84x80 |
|
| MA01-PR01-84x80-37-2 |
LINROT ACCESORIES; MagSpring Adaptor DUO for Lineal-Rotary Motor PR01-84x80 |
|
| MAPROSYS-S |
PROSYS USER MANUAL, span; ish |
|
| MB01-1000 |
LINMOT MB01; Magnetic band for external high resolution linear encoder, 1mm pitch, per cm |
|
| MB01-1000-ABS |
LINMOT MB01; Magnetic absolute strip for external high resolution linear encoder, 1mm pitch, per cm |
|
| MC-2PRN |
MC; Master Controller with Profinet |
|
| MC01-C/f |
LINMOT MC01; Connector C/f |
|
| MC01-C/f-as |
LINMOT MC01; Connector C/f, assembled |
|
| MC01-C/f-IP69K-SSC |
; Motor connector C/f, IP69K, SSC |
|
| MC01-C/f-IP69K-SSC-as |
; Motor connector C/f, IP69K, SSC, assembled |
|
| MC01-C/m |
LINMOT MC01; Connector C/m |
|
| MC01-D/m |
LINMOT MC01; Connector D/m |
|
| MC01-D/m-as |
LINMOT MC01; Connector D/m, assembled |
|
| MC01-F/R |
; Mounting flange for connector MC01-R |
|
| MC01-N/f |
LINMOT MC01; Connector N/f |
|
| MC01-P/f |
LINMOT MC01; Connector P/f |
|
| MC01-P/m |
LINMOT MC01; Connector P/m |
|
| MC01-R/f |
LINMOT MC01; Connector R/f |
|
| MC01-R/f-as |
LINMOT MC01; Connector R/f, assembled |
|
| MC01-R/m |
LINMOT MC01; Connector R/m |
|
| MC01-W/m |
LINMOT MC01; Connector W/m |
|
| MC01-W/m-as |
LINMOT MC01; Connector W/m, assembled |
|
| MC01-Y-Fe/m |
LINMOT MC01; Connector Y/m |
|
| MC01-Y-Fe/m-as |
LINMOT MC01; Connector Y/m, assembled |
|
| MC10-EMV/14-D |
LINMOT KPS; Shield clamp for P10 motor power cable |
|
| MC1220 |
MC1220; Densei-Lambda,Noise Filter (single phase / 250Vac / 20A) |
|
| MCA12A-0 |
Minicontrol - Digital Output Modules; MINI digital output module
12 relay outputs 220 VAC / 24 VDC, 2 A
3 electrically isolated output groups |
|
| MCA12B-0 |
Minicontrol - Digital Output Modules; MINI digital output module
12 transistor outputs 24 VDC, 0.5 A |
|
| MCA12C-0 |
Minicontrol - Digital Output Modules; MINI digital output module
12 transistor outputs 24 VDC, 2 A |
|
| MCCP32-022 |
Minicontrol - CPU Systems; MINI CPU
32 KByte EEPROM expansion memory
Order application memory EE32 with
16 KByte EEPROM and 16 KByte SRAM for
4.7 KB instructions separately!
Real time clock
1 TTY online interface with
electrically isolated receiver
1 RS48 |
|
| MCE16A-0 |
Minicontrol - Digital Input Modules; MINI digital input module
16 inputs 24 VDC
0->1: 10 msec, 1->0: 20 msec, sink |
|
| MCGE232-022 |
Minicontrol - Backplanes; MINI base unit C
Housing, power supply module
NT33 (24 VDC), CPU CP32
32 KByte EEPROM expansion memory
With application memory EE32
16 KByte EEPROM
16 KByte SRAM for 4.7 KB instructions
1 TTY online interface with
electrically is |
|
| MCGE31-0 |
Minicontrol - Backplanes; MINI base unit A
Housing, power supply module
NT33 (24 VDC), CPU CP30
With application memory EE32
16 KByte EEPROM
16 KByte SRAM for 4.7 KB instructions
1 TTY online interface with
electrically isolated receiver
6 slots for digit |
|
| MCGE33-0 |
Minicontrol - Backplanes; MINI base unit B
Housing, power supply module
NT33 (24 VDC), CPU CP31
With application memory EE32
16 KByte EEPROM
16 KByte SRAM for 4.7 KB instructions
1 TTY online interface with
electrically isolated receiver
1 TTY interface w |
|
| MCGE331-022 |
MINI BASIC UNIT; WITH MCCP31-022 |
|
| MCMAEA-0 |
Minicontrol - Digital Mixed Modules; MINI digital mixed module
8 inputs 24 VDC
0->1: 10 msec, 1->0: 20 msec, sink
6 transistor outputs 24 VDC, 0.5 A |
|
| MCMAEB-0 |
Minicontrol - Digital Mixed Modules; MINI digital mixed module
16 inputs 24 VDC, 5 msec, sink
16 transistor outputs 24 VDC, 0.5 A |
|
| MCNT33-0 |
MINI POWER SUPPLY MODULE; ,24 VDC, electr.isolated |
|
| MCPATA-0 |
Minicontrol - Interface Modules; MINI interface module
For controlling of MINICONTROL
operator panels or for use
as an SSI interface |
|
| MCPEA4-1 |
Minicontrol - Analog Input Modules; MINI analog input module
4 inputs, 0 to 10 V, 10 bit
Can be used in base unit C |
|
| MCPEA8-0 |
MINI ANAL. COMB. MODULE; 4I x 0-10V, 4 O x +/-10V |
|
| MCPIFA-2 |
Minicontrol - Interface Modules; MINI interface module
1 RS232 interface
Can be used in base unit C |
|
| MCPIFA-3 |
Minicontrol - Communication Modules; MINI interface module
1 RS485 interface
Electrically isolated, network-capable
Can be used in base unit C |
|
| MCPNC4-1 |
Minicontrol - Counter and Motion Control Modules; MINI counter module (positioning)
1 input for incremental encoder, 24 bit
Input frequency 50 kHz
1 analog output +/- 10 V, 11 bit
Encoder supply 5 to 15 VDC
Can be used in base unit C |
|
| MCPRTA-0 |
MINI ANALOG MODULE CLOCK; 4xI 0-10V/20mA, 10 bit |
|
| MCPSA2-0 |
Minicontrol - Counter and Motion Control Modules; MINI module - stepper motor positioning
2 axes, valid for both axes:
5 digital inputs 24 VDC, sink
1 transistor output 5 to 24 VDC, 50 mA
Pulse frequency 25 Hz to 20 kHz
3 transistor outputs 5 to 24 VDC
3 |
|
| MCPTE6-0 |
Minicontrol - Temperature Input Modules; MINI analog input module
6 inputs, sensor type F/J/K
-150 to +1200 degrees C
Can be used in base unit C |
|
| MCPZL2-0 |
MINI COUNTER MODULE; 6xOPTO, 24V, 20 kHz |
|
| MDA115-0 |
Midi/M264/Multicontrol - Digital Output Modules; MULTI digital output module
16 transistor outputs 24 VDC, 0.5 A |
|
| MDA163-0 |
Midi/M264/Multicontrol - Digital Output Modules; MULTI digital output module
16 relay outputs 220 VAC / 24 VDC, 2 A
4 electrically isolated output groups |
|
| MDCP41-01 |
Midi/M264/Multicontrol - CPU Systems; MIDI CPU type A
Order application memory EE32 with
16 KByte EEPROM and 16 KByte SRAM for
4.7 KB instructions separately!
1 TTY online interface with
electrically isolated receiver
Can be used in MIDI module racks |
|
| MDE163-0 |
Midi/M264/Multicontrol - Digital Input Modules; MULTI digital input module
16 inputs 24 VDC
0->1: 10 msec, 1->0: 15 msec, sink |
|
| MDPIF1-0 |
Midi/M264/Multicontrol - Interface Modules; MULTI interface module
1 RS232/TTY interface
TTY: with electrically isolated receiver |
|
| MDPIF1-1 |
Midi/M264/Multicontrol - Interface Modules; MULTI interface module
1 network-capable RS422 interface |
|
| MDR085-0 |
MIDI RACK, 11 inches, 8; slots, "UL" |
|
| MEM410BCANM152P |
MEM-Bus Encoder,Multiturn 13/16bit; ,Absolute CANopen, Shaft 15, 2 cable glands,Suply 5/28VDC IP64 |
|
| MEM620B-PDP-M-10-3P |
Assoluto Profibus DPV0 multigiro 13/16bit, albero diametro 10mm, 3 pressacavi
Alim. 5/28Vdc; Profibus DPV Multiturn |
|
| MF01-20/H23 |
LINMOT MF01; Flange MagString M01-20 for guides H01-23 |
|
| MF01-37/H37 |
LINMOT MF01; Flange MagString M01-37 for guides H01-37, B01-37, H01-48 & B01-48 |
|
| MF01-BK52 |
MF01; Brake-Kit for PR01-52 Linear Rotary Motor |
|
| MF01-PR01-52x40-20 |
LINROT ACCESORIES; Multipurpose Flange for Lineal-Rotary Motor PR01-52x60 |
|
| MF01-PR01-52x40-37 |
LINROT ACCESORIES; Multipurpose Flange for Lineal-Rotary Motor PR01-52x60 |
|
| MF01-PR01-84x80-37-1 |
LINROT ACCESORIES; Multipurpose Flange UNO for Lineal-Rotary Motor PR01-84x80 |
|
| MF01-PR01-84x80-37-2 |
LINROT ACCESORIES; Multipurpose Flange DUO for Lineal-Rotary Motor PR01-84x80 |
|
| MG15HLFE58021 |
; Kawasaki extra-large payload robot, 6 axes
payload 1500kg
horizontal reach 4005mm
vertical reach 4416mm
repeatability +/-0.1mm
maximum linear speed 5000mm/s
floor mounting
controller E58 |
|
| MGT4024YB-O10 |
MSEL; MSEL Cooling FAN |
|
| MHY2080BS |
Industrial HD; 80 Gb 3,5" HD, 5400 RPM, for 24/7 industrial and business critical applications |
|
| MinOrder |
; Charge for orders below 300€ |
|
| MIPC.CF2GWXP |
; |
|
| MIPC07-RaspberryPi3B+COD |
; |
|
| MIPC10-LX800-1024 |
; |
|
| MIPC10-LX800-512-4puls |
; |
|
| MIPC10-LX800-512-beta |
; |
|
| MIPC15-C2D2000-1024 |
; |
|
| MIPC15-C2D2200-2048 |
; |
|
| MIPC15-I7-7820-R4G-SSD128G |
; |
|
| ML01-12X130/80-10 |
LINMOT ML01; Slider for MagSpring M01-20x60/50, Force 11/40N |
|
| ML01-12X130/80-20 |
LINMOT ML01; Slider for MagSpring M01-20x60/50, Force 22/60N |
|
| ML01-12X210/160-10 |
LINMOT ML01; Slider for MagSpring M01-20x140/130, Force 11/40N |
|
| ML01-12X210/160-15 |
LINMOT ML01; Slider for MagSpring M01-20x140/130, Force 17/50N |
|
| ML01-12X210/160-20 |
LINMOT ML01; Slider for MagSpring M01-20x140/130, Force 22/60N |
|
| ML01-12X290/240-10 |
LINMOT ML01; Slider for MagSpring M01-20x220/210, Force 11/40N |
|
| ML01-12X290/240-20 |
LINMOT ML01; Slider for MagSpring M01-20x220/210, Force 22/60N |
|
| ML01-12x335/160-20 |
LINMOT ML01; Slider for LinRot MagSpring, Force 22/60N |
|
| ML01-12x350/160-10 |
LINMOT ML01; Slider for LinRot MagSpring, Force 40N |
|
| ML01-12x350/160-20 |
LINMOT ML01; Slider for LinRot MagSpring, Force 22/60N |
|
| ML01-12X370/320-10 |
LINMOT ML01; Slider for MagSpring M01-20x300/290, Force 11/40N |
|
| ML01-12X370/320-15 |
LINMOT ML01; Slider for MagSpring M01-20x300/290, Force 17/50N |
|
| ML01-12X370/320-20 |
LINMOT ML01; Slider for MagSpring M01-20x300/290, Force 22/60N |
|
| ML01-12X450/400-20 |
LINMOT ML01; Slider for MagSpring M01-37x380/350, Force 60N |
|
| ML01-12x650/320-20 |
LINMOT ML01; Slider for LinRot MagSpring, Force 60N |
|
| ML01-AS300 |
Undefined category; Undefined description |
|
| MM-E00420.190 |
Product Catalog 04 E; Complete package |
|
| MM-E00443.231 |
Accessories System 2000 - Brochures; X20 System Brochure english |
|
| MM-E00536.310 |
Accessories System 2000 - Brochures; B&R corporate Image english |
|
| MM-E00540.319 |
Accessories System 2000 - Brochures; B&R APROL 3.0 english |
|
| MM-E00542.327 |
Accessories System 2000 - Brochures; Innovatons 2006 English |
|
| MM-E00617.390 |
Accessories System 2000 - Brochures; B&R APROL 3.0 english Flyer |
|
| MP200 |
MP200 Magnetic band; including stainless steel support, max length 50m (price per meter) |
|
| MRE62012G10/24SSI10-CC14 |
MRE620 Absolute Single-Turn Encoder; Ass. 12 bit resolution, Gray code,Cnn 14p M+F Supply 10/24 Vdc, SSI output PNP, 10mm |
|
| MRE62012G5SSI10 |
MRE620 Absolute Single-Turn Encoder; 12 bit resolution, optical, Gray code, Supply 5 Vdc, SSI output PNP, 10mm |
|
| MRE6208G1024PP8 |
MRE520 Absolute Single-Turn Encoder; 8 bit resolution, optical, Gray code, Supply 10...24Vdc, Push Pull output |
|
| MRE6209B5SSI10 |
MRE620 Absolute Single-Turn Encoder; 9 bit resolution, Magnetic-Binary code, Supply 5 Vdc, SSI output PNP, 10mm |
|
| MS01-1/D |
LINMOT MS01; External high resolution linear encoder 1um, A/B, for 1mm magnetic band |
|
| MS01-1/D-SSI |
LINMOT MS01; External high resolution linear encoder 1um, A/B, for absolute strip magnetic band |
|
| MS01-20x140 |
LINMOT MS01; MagSpring Stator 20x140mm |
|
| MS01-20x220 |
LINMOT MS01; MagSpring Stator 20x220mm |
|
| MS01-20x300 |
LINMOT MS01; MagSpring Stator 20x300mm |
|
| MS01-20x60 |
LINMOT MS01; MagSpring Stator 20x60mm |
|
| MS01-37x155 |
LINMOT MS01; MagSpring Stator 37x155mm |
|
| MS01-37x230 |
LINMOT MS01; MagSpring Stator 37x230mm |
|
| MS01-37x305 |
LINMOT MS01; MagSpring Stator 37x305mm |
|
| MS01-37x380 |
LINMOT MS01; MagSpring Stator 37x380mm |
|
| MS01-37x80 |
LINMOT MS01; MagSpring Stator 37x80mm |
|
| MS01-40x100-SSC |
LINMOT MS01; MagSpring Stator 40x100mm SSC |
|
| MSEL-NPN |
MSEL; Expansion I/O Board |
|
| MSEL-PC-4-WUM-42PWAI-42PWAI-PN-E-5-4 |
MSEL; Program controller for pulse motor; 4 interpolated axis; WU-M unit; 42P actuator; 42P actuator; absolute encoder, PNP I/O conection; 5m cable; Power 100-230 Vac |
|
| MSEL-PG-3-56PWAI-56PWAI-35PWAI-X3-PN-E-5-4-WAI-0 |
MSEL; Program controller; 3 interpolated axis; absolute encoder, PNP I/O conection; 5 Mts cable; Power 100-220 Vac; 56P motor WA; 56P motor WA; 35P motor I |
|
| MSEL-PGX3-3N3515WAI-PN-E-5-4 |
MSEL; Program controller for PowerCon SCARA; 3 interpolated axis; absolute encoder, PNP I/O conection; 5 Mts cable; Power 100-220 Vac |
|
| MSEL-PGX4-4N2508WAI-PN-E-5-4 |
MSEL; Program controller for PowerCon SCARA; 4 interpolated axis; absolute encoder, PNP I/O conection; 5 Mts cable; Power 100-220 Vac |
|
| MSEL-PGX4-4N4515WAI-PN-E-5-4 |
MSEL; Program controller for PowerCon SCARA; 4 interpolated axis; absolute encoder, PNP I/O conection; 5 Mts cable; Power 100-220 Vac |
|
| MSEL-PGX4-4N4515WAI-PN-EP-5-4 |
MSEL; Program controller for PowerCon SCARA; 4 interpolated axis; absolute encoder, PNP I/O conection; Expansion I/O EtherNET/IP; 5 Mts cable; Power 100-220 Vac |
|
| MSEL-PGX4-4N4515WAI-PN-PN-5-4 |
MSEL; Program controller for PowerCon SCARA; 4 interpolated axis; absolute encoder, PNP I/O conection, 5 Mts cable; expansion PNP I/O,; Power 100-220 Vac |
|
| MSEL-PGX4-4N5520WAI-PN-PN-5-4 |
MSEL; Program controller for PowerCon SCARA; 4 interpolated axis; absolute encoder, PNP I/O conection, 5 Mts cable; expansion PNP I/O,; Power 100-220 Vac |
|
| MSSWINDOWSXPE |
; Licence windows XP embedded |
|
| MSTB2.5/3-STF-5.0 |
Conectores; MSEL Power Supply Connecter |
|
| MSWINDOWS7 PROF |
; Licence windows 7 |
|
| MTS30U4-48-W44345 |
DC Servo motor; Servomotor with “M55, S55, K50, P50, C62, T07, E53, A50, G62, W51, SPL”Autocon Esp., your offer: LARR001with 1250 pulses encoder |
|
| MU4 Motor Encoder Cable Assembly 81652002-00-001 |
; MU4 Motor Encoder Cable Assembly in Motor Box 81652002-00-001 |
|
| NF01-FN258-16-07 |
LINMOT NF01; 3 Phase EMC/EMI Line Filter for E1400 (motor cable up to 50m) |
|
| NF01-FS34984-6-61 |
LINMOT NF01; 1 Phase EMC/EMI Line Filter for C1400 |
|
| NF01-FS34985-20-71 |
LINMOT NF01; 3 Phase EMC/RFI Line Filter for E1400 (motor cable up to 20m) |
|
| NL 50-MPI |
; NetLINK 50 Gateway Ethernet/MPI |
|
| NO DEFINIDO |
Sin definir; SinDefinir |
|
| NS-LXMMA-A-400-20-750-T2-N-AQ-RT-EU |
NS; Rotating nut linear actuator multi-slider; horizontal specification / multi-slider; Absolute encoder; 400 W motor; 20 mm pich; 750 mm Travel; T2 Controller; no cable; no sensors; Standard cable truck; Ball retainer; Auto lubrication |
|
| NS-LXMMA-A-400-20-850-T2-N-AQ-CT1-RT-EU |
NS; Rotating nut linear actuator multi-slider; horizontal specification / multi-slider; Absolute encoder; 400 W motor; 20 mm pich; 850 mm Travel; T2 Controller; no cable; no sensors; Standard cable truck; Ball retainer; Auto lubrication |
|
| NS-LXMXS-A-400-20-3000-T2-M-AQ-CT1-RT |
NS; Rotating nut linear actuator single-slider; horizontal specification /single-slider; Absolute encoder; 400 W motor; 20 mm pich; 3000 mm Travel; T2 Controller; 5 Mt standard cable no sensors; Standard cable truck; Ball retainer; Auto lubrication |
|
| NS-SXMM-I-60-12-700-T2-S-AQ-CT1-RT-EU |
NS; Rotating nut linear actuator multi-slider; Small horizontal /multi-slider; Incremental encoder; 60 W motor; 12 mm pich; 700 mm Travel; T2 Controller; 3 Mt standard cable no sensors; Standard cable truck; Ball retainer; Auto lubrication; Metalic connec |
|
| NS1R |
Multifuntion controller; 1axis, analog output and 5vLD encoder input, 6+6 terminal box PNP I/O, 1 ser.line RS232, |
|
| NX4P2P1S |
Nexus Multifunction controller; 4 axis analog output, 32I + 32O PNP, 256Kb RAM, 1 RS232, 1 RS485 |
|
| NX4P2P2R |
Nexus Multifunction controller; 4 axis analog output, 32I + 32O PNP, 256Kb RAM, 1 RS232, 1 RS485 |
|
| OMX-380DU-01-00 |
; Condizionatore di segnale OMX380 D2208, Entrada de potenciometro, Alim.18/30Vdc uscita 4-20mA/0-10Vdc |
|
| OPC-ABSTE-NA00 |
KEP Server Ex driver; OPC server for Allend Bradley ControlLogix, DH+, DF1,Ethernet,Unsolicited Ethernet |
|
| OPC-CLACE-NA00 |
ClientAce OPC .NET Toolkit; Ssimple-to-use tools for developers wanting to build an OPC client application,.including DA Junction and the .NET API. |
|
| OPC-CLACE-SUPT |
ClientAce OPC .NET Toolkit; 1st Year Technical Support
Price: $295
Includes: Support Contract ID entitles customer to 2 Hours of FIFO Phone Support (during Kepware normal business hours) & Unlimited Email Support for the period of 1 year after date of p |
|
| OPC-DLOGR-NA00 |
KEP Server; DataLogger Option for KEPServerEX |
|
| OPC-HILUN-NA00 |
KEP Server Ex driver; Hilscher universal driver |
|
| OPC-MDBUS-NA00 |
KEP Server Ex driver; OPC server for Modbus Ascci, Ethernet, Plus, RTU, Serial |
|
| OPC-OMRNF-NA00 |
KEP Server Ex driver; OPC server for Omron FINS Ethernet / Serial, Host link, Process suite, Toolbus |
|
| OPC-OPCCD-NA00 |
KEP Server Ex driver; OPC DA Client Driver OPC Server |
|
| OPC-SIEMS-NA00 |
KEP Server Ex driver; OPC server for Siemens S7 200/300/400 TCP/IP Ethernet |
|
| OPC-TLMUW-NA00 |
KEP Server Ex driver; Telemecanique Uni-Telway |
|
| OPT-10-200102L10 |
; Kawasaki Option, Harness Assy IO F Controller |
|
| OPT-10-200103 |
; Kawasaki Option, PCB Assy Interface Module |
|
| OPT-10-210003L15 |
; Kawasaki Option, for CP series, Power/Signal harness extension (10m to 15m) |
|
| OPT-40217-G098 |
; Kawasaki Option, for E0x Controller, CUBIC-S safety system |
|
| OPT-40217-G127 |
; Kawasaki Option, for F60 Controller, CUBIC-S safety system (including 50833-0198 + 60819-0224 + 50807-0072) |
|
| OPT-40217-G178 |
; Kawasaki Option, for E58 Controller, CUBIC-S safety system |
|
| OPT-40229-G298 |
; Kawasaki Option, for F60 Controller, 1SQ Board and harness 2ch (including 50977-5027) |
|
| OPT-40954-1964 |
; Kawasaki Option, Piping-unit D1, RS007 |
|
| OPT-49094-0518 |
; Kawasaki Option, for F60 Controller, 2AW Board 32 digital Input / 32 Digital Output PNP |
|
| OPT-49094-0585 |
; Kawasaki Option, for F60 Controller, Controller F60 enclosed structure kit for IP54 protection |
|
| OPT-50977-0713 |
; Kawasaki Option, for E71/E91 Controller, 1SQ Board Internal Harness (1 channel conveyor) |
|
| OPT-50979-0360L20 |
; Kawasaki Option, for E0x Controller, T/P Harness Extension (20m) |
|
| OPT-50999-0061 |
; Kawasaki Option, for Exx Controller, Anybus ProfiNet IO Slave module |
|
| OPT-50999-0137 |
; Kawasaki Option, for Exx Controller, 1VA MotherBoard |
|
| OPT-50999-0420 |
; Kawasaki Option, for Exx Controller, EtherCAT Slave module |
|
| OPT-50999-0622 |
; Kawasaki Option, for Exx Controller, CC-Link Slave module |
|
| OPT-50999-0712 |
; Kawasaki Option, for F60 Controller, Anybus CompactCom M40 ProfiBus DP V1 Slave module |
|
| OPT-50999-0714 |
; Kawasaki Option, for F60 Controller, Anybus CompactCom M40 ProfiNet IRT Slave module |
|
| OPT-50999-0723 |
; Kawasaki Option, for F60 Controller, 1SQ Board and harness 1ch (including 50977-5028) |
|
| OPT-50999-2863 |
; Kawasaki Option, for E71/E91 Controller, 1SQ Board (1 channel conveyor) |
|
| OPT-50999-2923 |
; Kawasaki Option, for Exx Controller, 1TJ Anybus Module MotherBoard |
|
| OPT-50999-2933 |
; Kawasaki Option, for Exx Controller, 1TW Board 32 digital Input / 32 Digital Output PNP |
|
| OPT-50999-2958 |
; Kawasaki Option, for Exx Controller, 1TW-A Board 32 Digital Input / 32 Digital Output PNP + 4 Analog Output |
|
| OPT-50999-3001 |
; Kawasaki Option, for Exx Controller, 1TH Board Analog Inputs |
|
| OPT-60851-0016 |
; Kawasaki Option, Storage medium OpenAS Compact Flash card 4GB |
|
| OPT-MultiAxis-Controller-Exx |
; Kawasaki Option, Multi-Axis Controller
for Exx controller
6 axis (+1 as option) |
|
| OPT-MultiAxis6+1+200W |
; Kawasaki Option, Multi-axis Controller 6+1 axis, for E0X and E58 Controller, with 1x 200W motor
Multi-axis controller for 6+1 axis
Distribution box for six additional axis
OPT-50326-0200
Cable set multi-axis controller to distribution box 15m
OPT-5 |
|
| OPT-VolAccuracy-Calculation-MG15 |
; Kawasaki Option, for MG15 series, Volumetric accuracy calibration calculation |
|
| OPT-VolAccuracy-MG15 |
; Kawasaki Option, for MG15 series, Volumetric accuracy calibration option, first calibration calculation included |
|
| P04-37x120F/135-HP-R |
LINMOT P04; Linear Motor P04, 135mm stroke |
|
| P04-48x240F/150-C |
LINMOT P04; Linear Motor P04, 150mm stroke |
|
| P04k-W20x557-M12 |
; Guide shaft for P04-48x240F/150-C |
|
| PA01-23/12-F-2 |
LINMOT PA01; Wiper for PS01-23x... Front wiper |
|
| PA01-37/20-F |
LINMOT PA01; Wiper for PS01-37x... Front wiper |
|
| PA01-37/20-R |
LINMOT PA01; Wiper for PS01-37x... Back wiper, connector type |
|
| PA01-37/20-R cable |
LINMOT PA01; Wiper for PS01-37x... Front wiper, cable type |
|
| PA01-48/27-R |
LINMOT PA01; Wiper for PS01-48x... Back wiper |
|
| PA01-48/28-F |
LINMOT PA01; Wiper for PS01-48x... Front wiper |
|
| PA01-48/28-R |
LINMOT PA01; Wiper for PS01-48x... Back wiper |
|
| PA10-AH70 |
LINMOT ACCESORIES; Stator end piece back side with wiper for PS10-70 |
|
| PA10-AV70 |
LINMOT ACCESORIES; Stator end piece front side with wiper for PS10-70 |
|
| PAW01-20 |
; O-Ring wiper for PL01-20 |
|
| PAW01-28 |
; O-Ring wiper for PL01-28 |
|
| PB01-48x25-P-SSC |
LINMOT PB01; Plain Bearings for PS01-48x...-SSC Stainless Steel |
|
| PB02-48x25-P-WD |
LINMOT PB02; Plain Bearings for PS01-48x...-SSC Synthetical Wash-down |
|
| PB10-70x160-L |
LINMOT ACCESORIES; Bearing kit for PS10-70x160 |
|
| PB10-70x320-L |
LINMOT ACCESORIES; Bearing kit for PS10-70x320 |
|
| PC01-37x68 |
LINROT ACCESORIES; Cooling Element for Linear-Rotary Motor PR01 |
|
| PC01-48x100 |
LINROT ACCESORIES; Cooling Element for Linear-Rotary Motor PR01 |
|
| PC01-48x117 |
LINROT ACCESORIES; Cooling Element for Linear-Rotary Motor PR01 |
|
| PCON-C-28SP-I-PN-2-0 |
PCON; Position controller for RCP2 series (Category P1); 28P Actuator; Incremental encoder; PNP type PIO; 2Mt I/O cable standard; 24 V DC Power supply |
|
| PCON-C-56P-I-PN-2-0 |
PCON; |
|
| PCON-C-56P-I-PR-0-0 |
PCON; Position controller for RCP2 series (Category P1); C type; 56P Actuator; Incremental encoder; Profibus IO type; 24 V DC Power supply |
|
| PCON-CA-20P-I-PN-2-0 |
PCON; Position controller for RCP2 series (Category P3); CA type; 20P Actuator; Incremental encoder; PNP type PIO; 2Mt I/O cable standard; 24 V DC Power supply |
|
| PCON-CA-20PWAI-PN-2-0 |
PCON; Position controller for RCP2 series (Category P3); CA type; 20P Actuator; Incremental encoder; PNP type PIO; 2Mt I/O cable standard; 24 V DC Power supply |
|
| PCON-CA-20SP-WAI-PN-2-0 |
PCON; Position controller for RCP2 series (Category P3); CA type; 20SP Actuator; Incremental encoder; PNP type PIO; 2Mt I/O cable standard; 24 V DC Power supply |
|
| PCON-CA-28P-I-EP-0-0 |
PCON; Position controller for RCP2 series (Category P3); CA type; 28P Actuator; Incremental encoder; Ethernet IP; 24 V DC Power supply |
|
| PCON-CA-28P-I-PN-2-0 |
PCON; Position controller for RCP2 series (Category P3); CA type; 28P Actuator; Incremental encoder; PNP type PIO; 2Mt I/O cable standard; 24 V DC Power supply |
|
| PCON-CA-28P-I-PR-0-0 |
; Position controller for pulse motors CA/CFA, P3; CA category - 20 to 56P; 28 frame pulse motor - compatible; Incremental encoder; Profibus I/O type; No Cable; Power Dc 24 V |
|
| PCON-CA-28PWAI-EP-0-0 |
PCON; Position controller for pulse motors , CA/CFA; Advaced type; 28 frame pulse motor - compatible; Incremental encoder; Ethenret/IP I/O type; Power Dc 24 V |
|
| PCON-CA-28PWAI-PN-2-0 |
PCON; Position controller for RCP2 series (Category P3); CA type; 28P Actuator; Incremental encoder; PNP type PIO; 2Mt I/O cable standard; 24 V DC Power supply |
|
| PCON-CA-28SP-I-PR-0-0 |
; Position controller for pulse motors CA/CFA, P3; CA category - 20 to 56P; 28 frame pulse motor motor - compatible; Incremental encoder; Profibus I/O type; No Cable; Power Dc 24 V |
|
| PCON-CA-28SPWAI-PR-0-0 |
; Position controller for pulse motors CA/CFA, P3; CA category - 20 to 56P; 28 frame pulse motor motor - compatible; Incremental encoder; Profibus I/O type; No Cable; Power Dc 24 V |
|
| PCON-CA-28SPWAI-PRT-0-0 |
PCON; Position controller for pulse motors , CA/CFA; Advaced type; 28 frame pulse motor - compatible; Incremental encoder; Profinet I/O type; Power Dc 24 V |
|
| PCON-CA-35P-I-PN-2-0 |
PCON; Position controller for RCP2 series (Category P3); CA type; 35P Actuator; Incremental encoder; PNP type PIO; 2Mt I/O cable standard; 24 V DC Power supply |
|
| PCON-CA-35P-SA-PN-2-0-ABUN |
; Position controller for pulse motors , CA/CFA; Advaced type; 35 frame pulse motor - compatible; Simple absolute encoder encoder; Parallel I/O, PNP; Standard cable 2 Mts; Power Dc 24 V; For simple absolute, withouth battery |
|
| PCON-CA-35PWAI-PN-2-0 |
; Position controller for pulse motors , CA/CFA; Advaced type; 35 frame pulse motor - compatible; Incremental encoder; Parallel I/O, PNP; Standard cable 2 Mts; Power Dc 24 V |
|
| PCON-CA-42P-I-DV-0-0 |
PCON; Position controller for RCP4 series (Category P3); 42P Actuator; Incremental encoder; DeviceNet; 24 V DC Power supply |
|
| PCON-CA-42P-I-EP-2-0 |
PCON; Position controller for RCP4 series (Category P3); 42P Actuator; Incremental encoder; Ethernet IP; 24 V DC Power supply |
|
| PCON-CA-42P-I-PN-2-0 |
PCON; Position controller for pulse motors; CA category - 20 to 56P; 42 frame pulse motor - compatible; Incremental encoder; Parallel I/O, PNP; Standard cable 2 Mts; Power Dc 24 V |
|
| PCON-CA-42P-I-PR-0-0 |
; Position controller for pulse motors CA/CFA, P3; CA category - 20 to 56P; 42 frame pulse motor - compatible; Incremental encoder; Profibus I/O type; No Cable; Power Dc 24 V |
|
| PCON-CA-42PWA-I-PR-0-0 |
PCON; Position controller for pulse motors CA/CFA, P3; CA category - 20 to 56P; 42 frame pulse motor - compatible; Incremental encoder; Profibus I/O type; No Cable; Power Dc 24 V |
|
| PCON-CA-42PWAI-EP-0-0 |
PCON; Position controller for pulse motors , CA/CFA; Advanced type; 42 frame pulse motor - compatible; Incremental encoder; EtherNet I/P I/O type; Standard Cable; Power Dc 24 V |
|
| PCON-CA-42PWAI-PN-2-0 |
; Position controller for pulse motors , CA/CFA; Advaced type; 42 frame pulse motor - compatible; Incremental encoder; Parallel I/O, PNP; Standard cable 2 Mts; Power Dc 24 V |
|
| PCON-CA-42PWAI-PN-2-0-DN |
PCON; Position controller for pulse motors; CA category - 20 to 56P; 42 frame pulse motor - compatible; Absolute encoder; Parallel I/O, PNP; Standard cable 2 Mts; Power Dc 24 V; DIN rail mounting |
|
| PCON-CA-42PWAI-PR-2-0 |
PCON; Position controller for pulse motors , CA/CFA; Advaced type; 42 frame pulse motor - compatible; Incremental encoder; Profibus I/O type; 2Mt I/O cable standard; Power Dc 24 V |
|
| PCON-CA-42PWAI-PRT-0-0 |
PCON; Position controller for pulse motors , CA/CFA; Advaced type; 42 frame pulse motor - compatible; Incremental encoder; Profinet I/O type; Standard Cable; Power Dc 24 V |
|
| PCON-CA-56P-I-PN-2-0 |
PCON; Position controller for RCP2 series (Category P3); CA type; 56P Actuator; Incremental encoder; PNP type PIO; 2Mt I/O cable standard; 24 V DC Power supply |
|
| PCON-CA-56P-I-PR-0-0 |
PCON; Position controller for RCP2 series (Category P3); CA type; 56P Actuator; Incremental encoder; Profibus IO type; 24 V DC Power supply |
|
| PCON-CA-56PWAI-EC-0-0 |
; Position controller for pulse motors , CA/CFA; Advaced type; 56 frame pulse motor - compatible; Incremental encoder; EtherCat I/O type; No Cable; Power Dc 24 V |
|
| PCON-CA-56PWAI-PN-2-0 |
PCON; Position controller for RCP2 series (Category P3); CA type; 56P Actuator; Incremental encoder; PNP type PIO; 2Mt I/O cable standard; 24 V DC Power supply |
|
| PCON-CA-56PWAI-PR-0-0 |
PCON; Position controller for RCP2 series (Category P3); CA type; 56P Actuator; Incremental encoder; Profibus IO type; 24 V DC Power supply |
|
| PCON-CB-20PWAI-PN-2-0 |
PCON; Position controller for pulse motors; CB category - 20 to 56P; 20 frame pulse motor - compatible; Absolute encoder; Parallel I/O, PNP; Standard cable 2 Mts; Power Dc 24 V |
|
| PCON-CB-28PWAI-EP-0-0 |
PCON; Position controller for pulse motors; CB category - 20 to 56P; 28 frame pulse motor - compatible; Absolute encoder; EtherNet I/P field bus; Power Dc 24 V |
|
| PCON-CB-28PWAI-PN-2-0 |
PCON; Position controller for pulse motors , CB/CGB/CFB/CGFB; Standard type; 28 frame pulse motor - compatible; Incremental encoder; Parallel I/O, PNP; Standard cable 2 Mts; Power Dc 24 V |
|
| PCON-CB-35PWAI-CC-0-0 |
PCON; Position controller for pulse motors; CB category - 20 to 35P; 56 frame pulse motor - compatible; Absolute encoder; cc-Link field bus; Power Dc 24 V |
|
| PCON-CB-35PWAI-EC-0-0-DN |
PCON; Position controller for pulse motors; CB category - 20 to 56P; 35 frame pulse motor - compatible; Absolute encoder; EtherCAT field bus; Power Dc 24 V; DIN rail mounting |
|
| PCON-CB-35PWAI-EP-0-0 |
PCON; Position controller for pulse motors; CB category - 20 to 56P; 35 frame pulse motor - compatible; Absolute encoder; EtherNet I/P field bus; Power Dc 24 V |
|
| PCON-CB-35PWAI-PN-2-0 |
PCON; Position controller for pulse motors; CB category - 20 to 56P; 35 frame pulse motor - compatible; Absolute encoder; Parallel I/O, PNP; Standard cable 2 Mts; Power Dc 24 V |
|
| PCON-CB-35PWAI-PR-0-0 |
PCON; Position controller for pulse motors; CB category - 20 to 56P; 35 frame pulse motor - compatible; Absolute encoder; PROFIBUS-DP; Power Dc 24 V |
|
| PCON-CB-35PWAI-PRT-0-0 |
PCON; Position controller for pulse motors; CB category - 20 to 56P; 35 frame pulse motor - compatible; Absolute encoder; PROFINET field bus; Power Dc 24 V |
|
| PCON-CB-42PWAI-EC-0-0 |
PCON; Position controller for pulse motors; CB category - 20 to 56P; 56 frame pulse motor - compatible; Absolute encoder; EtherCAT field bus; Power Dc 24 V |
|
| PCON-CB-42PWAI-EC-0-0-DN |
PCON; Position controller for pulse motors; CB category - 20 to 56P; 35 frame pulse motor - compatible; Absolute encoder; EtherCAT field bus; Power Dc 24 V; DIN rail mounting |
|
| PCON-CB-42PWAI-EP-0-0 |
PCON; Position controller for pulse motors; CB category - 20 to 56P; 42 frame pulse motor - compatible; Absolute encoder; EtherNet I/P field bus; Power Dc 24 V |
|
| PCON-CB-42PWAI-PN-2-0 |
PCON; Position controller for pulse motors; CB category - 20 to 56P; 42 frame pulse motor - compatible; Absolute encoder; Parallel I/O, PNP; Standard cable 2 Mts; Power Dc 24 V |
|
| PCON-CB-42PWAI-PRT-0-0 |
PCON; Position controller for pulse motors; CB category - 20 to 56P; 42 frame pulse motor - compatible; Absolute encoder; PROFINET field bus; Power Dc 24 V |
|
| PCON-CB-56PWAI-CC-0-0 |
PCON; Position controller for pulse motors; CB category - 20 to 56P; 56 frame pulse motor - compatible; Absolute encoder; cc-Link field bus; Power Dc 24 V |
|
| PCON-CB-56PWAI-EC-0-0 |
PCON; Position controller for pulse motors; CB category - 20 to 56P; 56 frame pulse motor - compatible; Absolute encoder; EtherCAT field bus; Power Dc 24 V |
|
| PCON-CB-56PWAI-EP-0-0 |
PCON; Position controller for pulse motors; CB category - 20 to 56P; 56 frame pulse motor - compatible; Absolute encoder; EtherNet I/P field bus; Power Dc 24 V |
|
| PCON-CB-56PWAI-PN-2-0 |
PCON; Position controller for pulse motors; CB category - 20 to 56P; 56 frame pulse motor - compatible; Absolute encoder; Parallel I/O, PNP; Standard cable 2 Mts; Power Dc 24 V |
|
| PCON-CB-56PWAI-PN-5-0 |
PCON; Position controller for pulse motors; CB category - 20 to 56P; 56 frame pulse motor - compatible; Absolute encoder; Parallel I/O, PNP; Standard cable 5 Mts; Power Dc 24 V |
|
| PCON-CB-56PWAI-PRT-0-0 |
PCON; Position controller for pulse motors; CB category - 20 to 56P; 56 frame pulse motor - compatible; Absolute encoder; PROFINET field bus; Power Dc 24 V |
|
| PCON-CF-86P-I-PN-2-0 |
PCON; Position controller for RCP2 series (Category P2); High power type; 86P Actuator; Incremental encoder; PNP type PIO; 2Mt I/O cable standard; 24 V DC Power supply |
|
| PCON-CFA-60P-I-PN-2-0 |
PCON; Position controller for RCP2 series (Category P3); High power type; 60P Actuator; Incremental encoder; PNP type PIO; 2Mt I/O cable standard; 24 V DC Power supply |
|
| PCON-CFA-60PWAI-EC-0-0 |
PCON; Position controller for pulse motors , CA/CFA; High power advanced type; 60 frame pulse motor - compatible; Incremental encoder; EtherCat I/O type; No Cable; Power Dc 24 V |
|
| PCON-CFA-60PWAI-PN-2-0 |
PCON; Position controller for pulse motors , CA/CFA; High power advanced type; 60 frame pulse motor - compatible; Incremental encoder; Parallel I/O, PNP; Standard cable 2 Mts; Power Dc 24 V |
|
| PCON-CFA-86PWAI-EC-0-0 |
PCON; Position controller for pulse motors , CA/CFA; High power advanced type; 86 frame pulse motor - compatible; Incremental encoder; EtherCat I/O type; No Cable; Power Dc 24 V |
|
| PCON-CFA-86PWAI-PN-2-0 |
PCON; Position controller for RCP2 series (Category P4); High power type; 86P Actuator; Incremental encoder; PNP type PIO; 2Mt I/O cable standard; 24 V DC Power supply |
|
| PCON-CFA-86PWAI-PRT-0-0-DN |
PCON; Position controller for pulse motors , CA/CFA ; High power advanced type ; 86 frame pulse motor - compatible; Absolute encoder ; Profinet field bus ; Standard cable 2 Mts ; Power Dc 24 V ; DIN rail mounting. |
|
| PCON-CFB-56SPWAI-EP-0-0 |
PCON; Position controller for pulse motors , CB/CFB; High power advanced type; 56S frame pulse motor - compatible; Incremental encoder; Ethernet I/P I/O type; No Cable; Power Dc 24 V |
|
| PCON-CFB-86PWAI-PRT-0-0 |
PCON; Position controller for pulse motors; CFB category - 56S to 86P; 86 frame pulse motor - compatible; Absolute encoder; PROFINET field bus; Power Dc 24 V |
|
| PCON-CG-20P-I-PN-2-0 |
PCON; Position controller for RCP2 series (Category P1); Safety type; 20P Actuator; Incremental encoder; PNP type PIO; 2Mt I/O cable standard; 24 V DC Power supply |
|
| PCON-CG-28P-I-PN-2-0 |
PCON; Position controller for RCP2 series (Category P1); Safety type; 28P Actuator; Incremental encoder; PNP type PIO; 2Mt I/O cable standard; 24 V DC Power supply |
|
| PCON-CG-28SP-I-PN-2-0 |
PCON; Position controller for RCP2 series (Category P1); Safety type; 28SP Actuator; Incremental encoder; PNP type PIO; 2Mt I/O cable standard; 24 V DC Power supply |
|
| PCON-CG-28SPI-PN-0-0 |
PCON; Position controller for RCP2 series (Category P1); 28SP Actuator; Incremental encoder; PNP type PIO; 2Mt I/O cable standard; 24 V DC Power supply |
|
| PCON-CG-35P-I-PN-2-0 |
PCON; Position controller for RCP2 series (Category P1); Safety type; 35P Actuator; Incremental encoder; PNP type PIO; 2Mt I/O cable standard; 24 V DC Power supply |
|
| PCON-CG-35P-I-PR-0-0 |
PCON; Position controller for RCP2 series (Category P1); Safety type; 35P Actuator; Incremental encoder; Profibus; Cable is to be prepared by customer; 24 V DC Power supply |
|
| PCON-CG-42P-I-PN-2-0 |
PCON; Position controller for RCP2 series (Category P1); Safety type; 42P Actuator; Incremental encoder; PNP type PIO; 2Mt I/O cable standard; 24 V DC Power supply |
|
| PCON-CG-42P-I-PN-2-0-H |
PCON; Position controller for RCP2 series (Category P1); Safety type; 42P Actuator; Incremental encoder; PNP type PIO; 2Mt I/O cable standard; 24 V DC Power supply,High acceleration. |
|
| PCON-CG-42P-I-PR-0-0 |
PCON; Position controller for RCP2 series (Category P1); Safety type; 42P Actuator; Incremental encoder; Profibus Type; 24 V DC Power supply |
|
| PCON-CG-56P-I-PN-2-0 |
PCON; Position controller for RCP2 series, safety category type, 56 square pulse notor type, PNP,2 Mts cable, DC24V |
|
| PCON-CG-56P-I-PN-3-0 |
PCON; Position controller for RCP2 series (Category P1); Safety type; 56P Actuator; Incremental encoder; PNP type PIO; 3Mt I/O cable; 24 V DC Power supply |
|
| PCON-CGB-42PWAI-EP-0-0 |
PCON; Position controller for pulse motors; CB safety category - 20 to 56P; 42 frame pulse motor - compatible; Absolute encoder; EtherNet I/P field bus; Power Dc 24 V |
|
| PCON-CGFB-60PWAI-EP-0-0 |
PCON; PCON-CGFB-60PWAI-EP-0-0 |
|
| PCON-PL-42P-I-PN-2-0 |
PCON; Position controller for RCP2 series (Category P1); Pulse train type, 42P Actuator; Differencial receiver method; PNP I/O; 2Mt cable standard, 24V DC Power supply |
|
| PCON-PL-56P-I-PN-2-0 |
PCON; Position controller for RCP2 series (Category P1); Pulse train type, 56P Actuator; Differencial receiver method; PNP I/O; 2Mt cable standard, 24V DC Power supply |
|
| PCON-PO-42P-I-PN-2-0 |
PCON; Position controller for RCP2 series (Category P1); Pulse train type(Open collector); 42P Actuator; Incremental encoder; PNP type PIO; 2Mt I/O cable standard; 24 V DC Power supply |
|
| PCON-PO-56P-I-PN-2-0 |
PCON; Position controller for RCP2 series (Category P1); Pulse train type, 56P Actuator; Open collector method; PNP I/O; 2Mt cable standard, 24V DC Power supply |
|
| PD100-060-LD-K |
PD100 Trasduttori digitali lineari, risoluzione 0.01mm, Line driver 5 Vdc, K O-ring; 60mm |
|
| PD100-060-PP1 |
PD100 Trasduttori digitali lineari (con impulso di zero), Uscita PP, risoluzione 0.01mm; 60mm |
|
| PD100-120-LD4 |
PD100 Trasduttori digitali lineari (con impulso di zero) "0" a 7,5mm in apertura, alim 5Vdc out LD5Vdc, risoluzione 0.01mm; 120mm |
|
| PD100-120-PP |
PD100 Trasduttori digitali lineari (senza impulso di zero), Uscita PP, risoluzione 0.01mm; 120mm |
|
| PD100-120-PP2 |
PD100 Trasduttori digitali lineari (con impulso di zero) "0" in apertura e in chiusura, Uscita PP, risoluzione 0.01mm; 120mm |
|
| PD100-170-PP1 |
PD100 Trasduttori digitali lineari (con impulso di zero), Uscita PP, risoluzione 0.01mm; 170mm |
|
| PD100-200-PP1 |
PD100 Trasduttori digitali lineari (con impulso di zero), Uscita PP, risoluzione 0.01mm; 200mm |
|
| PD100-200-PP2 |
PD100 Trasduttori digitali lineari (con 2 impulso di zero), Uscita PP, risoluzione 0.01mm, 10/24 vdc; 200mm |
|
| PD100-200-PP4 |
PD100 Trasduttori digitali lineari (con impulso di zero), Uscita PP, risoluzione 0.01mm; 200mm |
|
| PD100-220-PP2 |
PD100 Trasduttori digitali lineari (con pulso di zero), Uscita PP2, risoluzione 0.01mm; 220mm |
|
| PD100-440-PP1 |
PD100 Trasduttori digitali lineari (con impulso di zero), Uscita PP, risoluzione 0.01mm; 440mm |
|
| PD100-520-PP1 |
PD100 Trasduttori digitali lineari (con impulso di zero), Uscita PP, risoluzione 0.01mm; 520mm |
|
| PD500-280-LD4 |
PD500 Trasduttori digitali lineari con 0 corsa 280 "0"a 7,5mm in apertura risoluzione 0,005mm Alim. 5Vdc - out LD5Vdc; 280mm |
|
| PD500-280-X15 |
PD500 Trasduttori lineari corsa 280, "0" a 30mm in apert. Alm. 5Vcc 0ut LD5Vcc Especiale; 280mm |
|
| PD500-280-X27 |
PD500 Trasduttore lineare con 0 corsa 280
"0" a 20mm con 2 snodi sferici
Alim. 5Vdc - out LD5Vdc; 280mm |
|
| PD500-360-X27 |
PD500 Trasduttori digitali lineari corsa 360, "0" a 20mm,con.12p PHOENIX M_F; "snodi Alm. 5Vcc-LD4 Especiale; 360mm |
|
| PE050060PP |
Trasduttore leneare, ris. 0,05mm, alim. 10/24Vdc; Corsa 60 mm |
|
| PE050120PP |
Trasduttore leneare, ris. 0,05mm, alim. 10/24Vdc; Corsa 120 mm |
|
| PE050120PP1 |
Trasduttore leneare, ris. 0,05mm, alim. 10/24Vdc, con 0 corsa; Corsa 120 mm |
|
| PE050170LD |
Trasduttore leneare, ris. 0,05mm, alim. 5v line driver; Corsa 170 mm |
|
| PE050170LD1 |
Trasduttore leneare, ris. 0,05mm, alim. 5v line driver con 0 corsa; Corsa 170 mm |
|
| PE050170PP |
Trasduttore leneare, ris. 0,05mm, alim. 10/24Vdc; Corsa 170 mm |
|
| PE050200LD |
Trasduttore leneare, ris. 0,05mm, alim. 5v line driver; Corsa 200 mm |
|
| PE050200PP1 |
Trasduttore leneare, ris. 0,05mm, alim. 12v Push Pull con 0 corsa; Corsa 200 mm |
|
| PE050280PP1 |
Trasduttore leneare, ris. 0,05mm, alim. 12v Push Pull, con 0 corsa; Corsa 280 mm |
|
| PE050280PP1K |
Trasduttore lineare con 0 corsa 280 risoluzione 0,05 con corteco
Alim. 10/24Vdc PP1; Corsa 280 mm |
|
| PE050360PP1 |
Trasduttore leneare, ris. 0,05mm, alim. 12v Push Pull, con 0 corsa; Corsa 360 mm |
|
| PE050520PP |
Trasduttore leneare, ris. 0,05mm, alim. 10/24Vdc,; Corsa 520 mm |
|
| PE050650PP1K |
Trasduttore lineare con 0 corsa 650 risoluzione 0,05 con corteco
Alim. 10/24Vdc PP1; Corsa 650 mm |
|
| PF01-48x120 |
LINMOT PF01; Flange for Linear Motor P01-48x240 |
|
| PF01-48x226 |
LINMOT PF01; Flange for Linear Motor P01-48x240 |
|
| PF01-48x240 |
LINMOT PF01; Flange for Linear Motor P01-48x240 |
|
| PF01-48x346 |
LINMOT PF01; Flange for Linear Motor P01-48x360 |
|
| PF02-23x120 |
LINMOT PF02; Flange for Linear Motor P01-23x160 |
|
| PF02-23x170 |
LINMOT PF02; Flange for Linear Motor P01-23x160 |
|
| PF02-23x50 |
LINMOT PF02; Flange for Linear Motor P01-23x80 |
|
| PF02-23x90 |
LINMOT PF02; Flange for Linear Motor P01-23x80, 90mm |
|
| PF02-37x100 |
LINMOT PF02; Flange for Linear Motor P01-37x120 |
|
| PF02-37x140 |
LINMOT PF02; Flange for Linear Motor P01-37x120 |
|
| PF02-37x200 |
LINMOT PF02; Flange for Linear Motor P01-37x240 |
|
| PF10-54x320 |
LINMOT PF10; Flange for Linear Motor PS10-54x300 |
|
| PF10-70x190 |
LINMOT PF10; Flange for Linear Motor PS10-70x160 |
|
| PF10-70x190-FC |
LINMOT PF10; Flange for Linear Motor PS10-70x160 fluid cooling |
|
| PF10-70x270 |
LINMOT PF10; Flange for Linear Motor PS10-70x240 |
|
| PF10-70x350 |
LINMOT PF10; Flange for Linear Motor PS10-70x320 |
|
| PF10-70x350-FC |
LINMOT PF10; Flange for Linear Motor PS10-70x320 fluid cooling |
|
| PF10-70x430 |
LINMOT PF10; Flange for Linear Motor PS10-70x400 |
|
| PF10-70x430-FC |
LINMOT PF10; Flange for Linear Motor PS10-70x400 fluid cooling |
|
| PL-CONN |
PL connector; Connector for PL series pottentiometer |
|
| PL01-12x130/90-HP |
LINMOT PL01; High Performance Slider 130mm length, 12mm diameter |
|
| PL01-12x150/110-HP |
LINMOT PL01; High Performance Slider 150mm length, 12mm diameter |
|
| PL01-12x170/120 |
LINMOT PL01; Standard Slider 170mm length, 12mm diameter |
|
| PL01-12x170/130-HP |
LINMOT PL01; High Performance Slider 170mm length, 12mm diameter |
|
| PL01-12x190/140 |
LINMOT PL01; Standard Slider 190mm length, 12mm diameter |
|
| PL01-12x200/100 |
LINMOT PL01; Standard Slider 200mm length, 12mm diameter |
|
| PL01-12x200/160-HP |
LINMOT PL01; High Performance Slider 200mm length, 12mm diameter |
|
| PL01-12x230/190-HP |
LINMOT PL01; High Performance Slider 230mm length, 12mm diameter |
|
| PL01-12x270/170 |
LINMOT PL01; Standard Slider 270mm length, 12mm diameter |
|
| PL01-12x270/230-HP |
LINMOT PL01; High Performance Slider 270mm length, 12mm diameter |
|
| PL01-12x290/240 |
LINMOT PL01; Standard Slider 290mm length, 12mm diameter |
|
| PL01-12x290/250-HP |
LINMOT PL01; High Performance Slider 290mm length, 12mm diameter |
|
| PL01-12x290/250-LC |
LINMOT PL01; Standard Slider 290mm length, 12mm diameter, LC |
|
| PL01-12x350/300 |
LINMOT PL01; Standard Slider 350mm length, 12mm diameter |
|
| PL01-12x350/310-HP |
LINMOT PL01; High Performance Slider 350mm length, 12mm diameter |
|
| PL01-12x350/310-HP-L |
LINMOT PL01; High Performance Hollow Slider 350mm length, 12mm diameter |
|
| PL01-12x420/370 |
LINMOT PL01; Standard Slider 420mm length, 12mm diameter |
|
| PL01-12x420/380-HP |
LINMOT PL01; High Performance Slider 420mm length, 12mm diameter |
|
| PL01-12x480/430 |
LINMOT PL01; Standard Slider 480mm length, 12mm diameter |
|
| PL01-12x480/440-HP |
LINMOT PL01; High Performance Slider 480mm length, 12mm diameter |
|
| PL01-12x580/540-HP |
LINMOT PL01; High Performance Slider 580mm length, 12mm diameter |
|
| PL01-20x1000/920 |
LINMOT PL01; Standard Slider 1000mm length, 20mm diameter |
|
| PL01-20x1100/1040-HP |
LINMOT PL01; High Performance Slider 1100mm length, 20mm diameter |
|
| PL01-20x1205/1160-HP-PF |
LINMOT PL01; High Performance Slider for linear guides 1205mm length, 20mm diameter |
|
| PL01-20x2000/1940-HP |
LINMOT PL01; High Performance Slider 2000mm length, 20mm diameter |
|
| PL01-20x240/180-HP |
LINMOT PL01; High Performance Slider 240mm length, 20mm diameter |
|
| PL01-20x300/220 |
LINMOT PL01; Standard Slider 300mm length, 20mm diameter |
|
| PL01-20x300/240-HP |
LINMOT PL01; High Performance Slider 300mm length, 20mm diameter |
|
| PL01-20x360/300-HP |
LINMOT PL01; High Performance Slider 360mm length, 20mm diameter |
|
| PL01-20x395/320 |
LINMOT PL01; Standard Slider 395mm length, 20mm diameter |
|
| PL01-20x400/340-HP |
LINMOT PL01; High Performance Slider 400mm length, 20mm diameter |
|
| PL01-20x500/420 |
LINMOT PL01; Standard Slider 500mm length, 20mm diameter |
|
| PL01-20x500/440-HP |
LINMOT PL01; High Performance Slider 500mm length, 20mm diameter |
|
| PL01-20x600/520 |
LINMOT PL01; Standard Slider 600mm length, 20mm diameter |
|
| PL01-20x600/540-HP |
LINMOT PL01; High Performance Slider 600mm length, 20mm diameter |
|
| PL01-20x700/640-HP |
LINMOT PL01; High Performance Slider 700mm length, 20mm diameter |
|
| PL01-20x800/720 |
LINMOT PL01; Standard Slider 800mm length, 20mm diameter |
|
| PL01-20x800/740-HP |
LINMOT PL01; High Performance Slider 800mm length, 20mm diameter |
|
| PL01-20x805/760-HP-PF |
LINMOT PL01; High Performance Slider for linear guides 805mm length, 20mm diameter |
|
| PL01-20x900/820 |
LINMOT PL01; Standard Slider 900mm length, 20mm diameter |
|
| PL01-27x1010/930 |
LINMOT PL01; High Clearance Slider 1010mm length, 27mm diameter |
|
| PL01-27x1400/1320 |
LINMOT PL01; High Clearance Slider 1400mm length, 27mm diameter |
|
| PL01-27x620/540 |
LINMOT PL01; High Clearance Slider 620mm length, 27mm diameter |
|
| PL01-27x800/720 |
LINMOT PL01; High Clearance Slider 800mm length, 27mm diameter |
|
| PL01-27x920/840 |
LINMOT PL01; High Clearance Slider 920mm length, 27mm diameter |
|
| PL01-28x1010/930 |
LINMOT PL01; Standard Slider 1010mm length, 28mm diameter |
|
| PL01-28x1220/1140 |
LINMOT PL01; Standard Slider 1220mm length, 28mm diameter |
|
| PL01-28x1400/1320 |
LINMOT PL01; Standard Slider 1400mm length, 28mm diameter |
|
| PL01-28x1610/1530 |
LINMOT PL01; Standard Slider 1610mm length, 28mm diameter |
|
| PL01-28x2000/1920 |
LINMOT PL01; Standard Slider 2000mm length, 28mm diameter |
|
| PL01-28x350/270 |
LINMOT PL01; Standard Slider 350mm length, 28mm diameter |
|
| PL01-28x410/330 |
LINMOT PL01; Standard Slider 410mm length, 28mm diameter |
|
| PL01-28x500/420 |
LINMOT PL01; Standard Slider 500mm length, 28mm diameter |
|
| PL01-28x620/540 |
LINMOT PL01; Standard Slider 620mm length, 28mm diameter |
|
| PL01-28x620/570-HP |
LINMOT PL01; High Performance Slider 620mm length, 28mm diameter |
|
| PL01-28x710/630 |
LINMOT PL01; Standard Slider 710mm length, 28mm diameter |
|
| PL01-28x800/720 |
LINMOT PL01; Standard Slider 800mm length, 28mm diameter |
|
| PL01-28x920/840 |
LINMOT PL01; Standard Slider 920mm length, 28mm diameter |
|
| PL02-12x290/240 |
LINMOT PL02; Heavy Duty Slider 290mm length, 12mm diameter |
|
| PL02-28x920/840 |
LINMOT PL02; Heavy Duty Slider 900mm length, 28mm diameter |
|
| PL10-28x1190/1140 |
LINMOT PL10; Standard Slider for P10-70, 1190mm length, 28mm diameter |
|
| PL10-28x1390/1340 |
LINMOT PL10; Standard Slider for P10-70, 1390mm length, 28mm diameter |
|
| PL10-28x1590/1540 |
LINMOT PL10; Standard Slider for P10-70, 1590mm length, 28mm diameter |
|
| PL10-28x390/340 |
LINMOT PL10; Standard Slider for P10-70, 390mm length, 28mm diameter |
|
| PL10-28x490/440 |
LINMOT PL10; Standard Slider for P10-70, 490mm length, 28mm diameter |
|
| PL10-28x590/540 |
LINMOT PL10; Standard Slider for P10-70, 590mm length, 28mm diameter |
|
| PL10-28x690/640 |
LINMOT PL10; Standard Slider for P10-70, 690mm length, 28mm diameter |
|
| PL10-28x790/740 |
LINMOT PL10; Standard Slider for P10-70, 790mm length, 28mm diameter |
|
| PL10-28x890/840 |
LINMOT PL10; Standard Slider for P10-70, 890mm length, 28mm diameter |
|
| PL10-28x990/940 |
LINMOT PL10; Standard Slider for P10-70, 990mm length, 28mm diameter |
|
| PL231-100 |
PL231 Potenciometri lineari serie PL231; 100mm, 5KOhm |
|
| PL231-100-10K |
PL231 Potenciometri lineari serie PL231 Resistencia 10 Kohms; 100mm |
|
| PL231-300 |
PL231 Potenciometri lineari serie PL231; 300mm, 5KOhm |
|
| PL231S-200 |
PL231 Potenciometri lineari serie PL231; 200mm, with 8 bit output 24 vdc |
|
| PL2S-100 |
PL2S Potenciometri lineari serie PL2S; 100mm, 5KOhm |
|
| PL2S-100-10K |
PL2S Potenciometri lineari serie PL2S 10 Kohms; 100mm |
|
| PL2S-200 |
PL2S Potenciometri lineari serie PL2S; 200mm, 5KOhm |
|
| PL2S-250 |
PL2S Potenciometri lineari serie PL2S; 250mm, 5KOhm |
|
| PL2S-300 |
PL2S Potenciometri lineari serie PL2S; 300mm, 5KOhm |
|
| PL2S-400 |
PL2S Potenciometri lineari serie PL2S; 400mm, 5KOhm |
|
| PL2S-50 |
PL2S Potenciometri lineari serie PL2S; 50mm, 5KOhm |
|
| PLF01-12 |
LINMOT PLF01; Fix Bearing for 12mm Slider |
|
| PLF01-20 |
LINMOT PLF01; Fix Bearing for 20mm Slider |
|
| PLF01-28 |
LINMOT PLF01; Fix Bearing for 28mm Slider |
|
| PLF01-28-SS |
LINMOT PLF01; Fix Bearing for 28mm Slider, Stainless Steel |
|
| PLL01-20 |
LINMOT PLL01; Floating Bearing for 20mm Slider |
|
| PLL01-28 |
LINMOT PLL01; Floating Bearing for 28mm Slider |
|
| PLL02-12 |
LINMOT PLL02; Floating Bearing for 12mm Slider |
|
| PLS-100 |
PLS Potenciometri lineari serie PLS; 100mm, 5KOhm |
|
| PLS-100 MR |
PLS Potenciometri lineari serie PLS Molla interna; 100mm, 5KOhm |
|
| PLS-100 MRR |
PLS Potenciometri lineari serie PLS Molla Inversa.; 100mm, 5KOhm |
|
| PLS-150 |
PLS Potenciometri lineari serie PLS (E0100P502); 150mm, 5KOhm |
|
| PLS-150 MR |
PLS Potenciometri lineari serie PLS Molla interna ( E0100P502M); 150mm, 5KOhm |
|
| PLS-150 MRR |
PLS Potenciometri lineari serie PLS Molla inversa (rovesciata) (E0100P502R); 150mm, 5KOhm |
|
| PLS-150 MRR 10K |
PLS Potenciometri lineari serie PLS Molla inversa (rovesciata) Resist. 10Kohm .; 150mm |
|
| PLS-200 |
PLS Potenciometri lineari serie PLS; 200mm, 5KOhm |
|
| PLS-200 MR |
PLS Potenciometri lineari serie PLS, con molla interna; 200mm, 5KOhm |
|
| PLS-200 MRR |
PLS Potenciometri lineari serie PLS, con molla rovesciata(inverso); 200mm, 5KOhm |
|
| PLS-250 |
PLS Potenciometri lineari serie PLS; 250mm, 5KOhm |
|
| PLS-250 MR |
PLS Potenciometri lineari serie PLS Molla interna ( E0100P502M); 250mm, 5KOhm |
|
| PLS-300 |
PLS Potenciometri lineari serie PLS; 300mm, 5KOhm |
|
| PLS-300 10K |
PLS Potenciometri lineari serie PLS; 300mm, 10KOhm |
|
| PLS-400 |
PLS Potenciometri lineari serie PLS; 400mm, 5KOhm |
|
| PLS-50 |
PLS Potenciometri lineari serie PLS; 50mm, 5KOhm |
|
| PLS-50 MR |
PLS Potenciometri lineari serie PLS Molla interna; 50mm, 5KOhm |
|
| PLS-500 |
PLS Potenciometri lineari serie PLS; 500mm |
|
| PLS-500 SF |
PLS Potenciometri lineari; PLS Potenciometri lineari serie PLS with SF option stroke 500mm |
|
| PM-100 |
PM Potenciometri lineari serie PM (E0504P502); 100mm, 5KOhm |
|
| PM-100 MR |
PM Potenciometri lineari serie PM con molla di retorno; 100mm, 5KOhm |
|
| PM-150 |
PM Potenciometri lineari serie PM; 150mm, 5KOhm |
|
| PM-25 |
PM Potenciometri lineari serie PM 1K; 25mm |
|
| PM-25 MR |
PM Potenciometri lineari serie PM con molla di retorno 1K; 25mm |
|
| PM-25-5k |
PM Potenciometri lineari serie PM; 25mm 5 Kohms |
|
| PM-25-5k MR |
PM Potenciometri lineari serie PM con molla di retorno; 25mm 5 Kohms |
|
| PM-50 |
PM Potenciometri lineari serie PM 5K; 50mm |
|
| PM-50 MR |
PM Potenciometri lineari serie PM con molla di retorno 5K; 50mm |
|
| PM-50 MRE |
PM Potenciometri lineari serie PM con molla di retorno 5K, Lin +/-0,15%; 50mm |
|
| PM-75 |
PM Potenciometri lineari serie PM; 75mm, 5KOhm |
|
| PM-75 MR |
PM Potenciometri lineari serie PM con molla di retorno; 75mm, 5KOhm |
|
| PM-CONN |
PM connector; Connector for PM series pottentiometer |
|
| PM2S-150 |
PM2S Potenciometri lineari serie PM2S; 150mm, 5KOhm |
|
| PM2S-50 |
PM2S Potenciometri lineari serie PM2S; 50mm, 5KOhm |
|
| PM2S-75 |
PM2S Potenciometri lineari serie PM2S; 75mm, 5KOhm |
|
| PMEC-C-42P-I-PN-2-2-ENG |
PMEC; 3-Position 230 VAC Controller for RCP2/RCP3, 42P Actuator; Incremental encoder; PNP type PIO; 2Mt I/O cable standard; single phase, |
|
| PR-50 |
Potenciometri lineari serie PR; 50mm |
|
| PR01-52x40-R/37x120F-HP-C-80 |
LINROT PR01; Linear-Rotary Motor, linear 80mm stroke 255N peak force, rotary 1500rpm max speed 1.4Nm peak torque. |
|
| PR01-52x60-R-G/37x120F-HP-C-100-G05 |
LINROT PR01; Linear-Rotary Motor, linear 100mm stroke 255N peak force, geared 5:1 rotary output, 300rpm max speed 10Nm peak torque |
|
| PR01-52x60-R-G/37x120F-HP-C-100-G10 |
LINROT PR01; Linear-Rotary Motor, linear 100mm stroke 255N peak force, geared 10:1 rotary output, 150rpm max speed 20Nm peak torque |
|
| PR01-52x60-R/37x120F-HP-C-100 |
LINROT PR01; Linear-Rotary Motor, linear 100mm stroke 255N peak force, rotary 1500rpm max speed 2.0Nm peak torque. |
|
| PR01-52x60-R/37x120F-HP-C-150 |
LINROT PR01; Linear-Rotary Motor, linear 150mm stroke 255N peak force, rotary 1500rpm max speed 2.0Nm peak torque. |
|
| PR01-84x80-C-G/48x360F-C-150-G05 |
LINROT PR01; Linear-Rotary Motor, linear 150mm stroke 1024N peak force, geared 5:1 rotary output, 200rpm max speed 40Nm peak torque |
|
| PR01-84x80-C/48x240F-C-100 |
LINROT PR01; Linear-Rotary Motor, linear 130mm stroke 572N peak force, rotary 1000rpm max speed 8.9Nm peak torque. |
|
| PR01-84x80-C/48x240F-C-150 |
LINROT PR01; Linear-Rotary Motor, linear 150mm stroke 572N peak force, rotary 1000rpm max speed 8.9Nm peak torque. |
|
| PR01-84x80-C/48x240F-C-300 |
LINROT PR01; Linear-Rotary Motor, linear 300mm stroke 572N peak force, rotary 1000rpm max speed 8.9Nm peak torque. |
|
| PR01-84x80-C/48x240F-C-300-L |
LINROT PR01; Linear-Rotary Motor, linear 300mm stroke 514N peak force, rotary 1000rpm max speed 8.9Nm peak torque. Hollow shaft |
|
| PR02-52x60-R_37x120F-HP-R-100_MS01_TS01 |
LINROT PR02; Linear-Rotary Motor, linear 100mm stroke 255N peak force, rotary 1500rpm max speed 2.2Nm peak torque, weight compensation 30N MagSpring, torque sensor 2.5Nm +-10V |
|
| PS01-23x160 |
LINMOT PS01; Linear Motor Stator, 1m cable, connector Dsub 9 |
|
| PS01-23x160-R |
LINMOT PS01; Linear Motor Stator, IP67connector M17/9 |
|
| PS01-23x160F-R20 |
LINMOT PS01; Linear Motor Stator, 0.2m cable, IP67 connector M17/9 |
|
| PS01-23x160H-HP-R |
LINMOT PS01; Linear Motor HP Stator, IP67connector M17/9 |
|
| PS01-23x160H-HP-R20 |
LINMOT PS01; Linear Motor HP Stator, 0.2m cable, IP67 connector M17/9 |
|
| PS01-23x80 |
LINMOT PS01; Linear Motor Stator, 1m cable, connector Dsub 9 |
|
| PS01-23x80-R |
LINMOT PS01; Linear Motor Stator, IP67connector M17/9 |
|
| PS01-23x80F-HP-R |
LINMOT PS01; Linear Motor Stator HP, IP67connector M17/9 |
|
| PS01-23x80F-HP-W100 |
LINMOT PS01; Linear Motor Stator HP, 1m cable W connector |
|
| PS01-37Sx120F-HP-N |
LINMOT PS01; Linear Motor Stator, high performance, cable connector N |
|
| PS01-37Sx120F-HP-N-AGI |
LINMOT PS01; Linear Motor Stator, high performance, cable connector N. AGI version with larger stator hole: for applications with moving stator. |
|
| PS01-37Sx60-HP-N |
LINMOT PS01; Linear Motor Stator, high performance, connector N |
|
| PS01-37x120 |
LINMOT PS01; Linear Motor Stator, 1.5m cable, connector P/10 |
|
| PS01-37x120-C |
LINMOT PS01; Linear Motor Stator, IP67connector M23/9 |
|
| PS01-37x120-M |
LINMOT PS01; Linear Motor Stator, 0.2m cable, IP67 connector M23/12 |
|
| PS01-37x120F-HP-C |
LINMOT PS01; Linear Motor Stator HP, IP67, connector M23/9 |
|
| PS01-37x120F-HP-C-100 |
LINMOT PS01; Linear Motor Stator HP, IP67, connector M23/9, for PR01 unit |
|
| PS01-37x120F-HP-C20 |
LINMOT PS01; Linear Motor HP Stator, 0.2m cable, IP67 connector M23/9 |
|
| PS01-37x240 |
LINMOT PS01; Linear Motor Stator, 1.5m cable, connector P/10 |
|
| PS01-37x240F-M |
LINMOT PS01; Linear Motor Stator, 0.2m cable, IP67 connector M23/12 |
|
| PS01-48x240-C |
LINMOT PS01; Linear Motor Stator, IP67connector M23/9 |
|
| PS01-48x240F-C |
LINMOT PS01; Linear Motor Stator, IP67connector M23/9 |
|
| PS01-48x240F-C-150 |
LINMOT PS01; Linear Motor Stator, IP67, connector M23/9, for PR01 unit |
|
| PS01-48x240F-HP-C |
LINMOT PS01; Linear Motor Stator HP, IP67, connector M23/9 |
|
| PS01-48x240F-SSC-C-FC |
LINMOT PS01; Linear Motor Stator IP69K Stainless Steel, fluid cooling, connector M23/9 |
|
| PS01-48x360F-C |
LINMOT PS01; Linear Motor Stator, IP67connector M23/9 |
|
| PS01-48x360F-SSC-C |
LINMOT PS01; Linear Motor Stator IP69K Stainless Steel, connector M23/9 |
|
| PS02-23Sx80-F |
LINMOT PS02; Linear Motor Stator, flat cable connector 13 pin |
|
| PS02-23Sx80F-HP-K |
LINMOT PS02; Linear Motor Stator, high performance, cable connector K |
|
| PS10-54x300U-BL-TU |
LINMOT PS10; Linear Motor Stator 3x400Vac |
|
| PS10-70x160U-BL-QJ |
LINMOT PS10; Linear Motor Stator 3x400Vac |
|
| PS10-70x160U-BL-QJ-D01 |
LINMOT PS10; Linear Motor Stator 3x400Vac, SinCos Encoder 1Vpp, KTY |
|
| PS10-70x240U-BL-QJ |
LINMOT PS10; Linear Motor Stator 3x400Vac |
|
| PS10-70x240U-BL-QJ-D01 |
LINMOT PS10; Linear Motor Stator 3x400Vac, SinCos Encoder 1Vpp, KTY |
|
| PS10-70x320U-BL-QJ |
LINMOT PS10; Linear Motor Stator 3x400Vac |
|
| PS10-70x400U-BL-QJ |
LINMOT PS10; Linear Motor Stator 3x400Vac |
|
| PS10-70x80U-BL-QJ-D01 |
LINMOT PS10; Linear Motor Stator 3x400Vac, SinCos Encoder 1Vpp, KTY |
|
| PSEL-C-2-35P-I-28P-I-PN-2-0 |
PSEL; Program controller for RCP2 series; two axis 35P and 28P; PNP connection |
|
| PSEL-C-2-42P-I-42P-I-PN-2-0-H |
PSEL; Program controller for RCP2 series; two axis 42P and 42P; PNP connection |
|
| PSEL-C-2-56P-I-56P-I-PN-2-0 |
PSEL; Program controller for RCP2 series |
|
| PSEL-CS-2-56P-I-56P-I-PN-2-0 |
PSEL; Program controller for RCP2 series; CS type |
|
| PSEP-C-56PI-PN-2-0 |
PSEP; 3-position controller for RCP2/RCP3 |
|
| PSM02-23Sx80-K |
LINMOT ACCESORIES; Cable mounting kit for PS02-23Sx80...-K |
|
| PST750-H1 |
; General purpose single axis positioner for Kawasaki Robotics welding robot
Kawasaki Robotics labeled
Horizontal rotating axis
Distance between plates to be defined
Maximum payload 750kg
Nominal torque 950Nm / maximum 2450Nm
Maximum moment of inert |
|
| R2G090-100-RGGS-AF-238-30-230-IA4 |
Tritex II Rotary Series Actuator; R2G 90mm Actuator frame size, Double reduction rate 100:1, Smooth/Round shap type, Standard straight threaded port with internal terminals M20x1,5, Exlar standard housing option, No brake, Absolute feedback encoder type, |
|
| RA010NFE01001 |
; Kawasaki arc welding robot, 6 axes
payload 10kg
horizontal reach 1450mm
vertical reach 2582mm
repeatability +/-0.06mm
floor, ceiling mounting
controller E01 |
|
| RABU |
; Absolute box for Robonet w/AB7 |
|
| RCA-A4R-I-20-5-100-A5-M-ML-B |
; RoboCylinder Arm Type, 24 V Servomotor; 40mm Width; Incremental encoder; 20 W servo motor; 5 mm pich; 100 mm Travel; A5 Controller; 5 Mt robot cable; Motor mounted left side; With brake |
|
| RCA-A6R-I-30-6-100-A1-S-B-ML |
RCA; ROBO cylinder Arm Type, Width 58mm, 24 V Servo Motor, Motor reversing Specification |
|
| RCA-A6R-I-30-6-100-A5-S-B-ML |
; RoboCylinder Arm Type, 24 V Servomotor; 58mm Width; Incremental encoder; 30 W servo motor; 3 mm pich; 100 mm Travel; A5 Controller; 3 Mt robot cable; With brake; Motor mounted left side |
|
| RCA-A6R-I-30-6-150-A5-S-B-ML |
; RoboCylinder Arm Type, 24 V Servomotor; 58mm Width; Incremental encoder; 30 W servo motor; 3 mm pich; 150 mm Travel; A5 Controller; 3 Mt robot cable; With brake; Motor mounted left side |
|
| RCA-A6R-I-30-6-200-A1-S-B-ML |
RCA; ROBO cylinder Arm Type, Width 58mm, 24 V Servo Motor, 200 mm Travel, Motor reversing Specification |
|
| RCA-RA4R-I-30-6-300-A1-S |
RCA; ROBO cylinder rod type; Actuator diameter 37 mm, 24 V servo motor, reversing specification; Incremental encoder; 30 W motor; 6 mm pich; 300 mm Travel; A1 Controller; 3 Mt standard cable |
|
| RCA-RA4R-I-30-6-300-A1-S-LA |
RCA; ROBO cylinder rod type; Actuator diameter 37 mm, 24 V servo motor, reversing specification; Incremental encoder; 30 W motor; 6 mm pich; 300 mm Travel; A1 Controller; 3 Mt standard cable |
|
| RCA-SA4D-I-20-2.5-150-A1-R10-NM-LA-SP |
; RoboCylinder Slider Type, 24 V Servomotor; 40mm Width, direct copupled; Incremental encoder; 20 W servo motor; 2.5 mm pich; 150 mm Travel; A1 Controller; 10 Mt. robot cable; Inverse home position; Power saving |
|
| RCA-SA4D-I-20-2.5-200-A1-R10-NM-LA-SP |
; RoboCylinder Slider Type, 24 V Servomotor; 40mm Width, direct copupled; Incremental encoder; 20 W servo motor; 2.5 mm pich; 200 mm Travel; A1 Controller; 10 Mt. robot cable; Inverse home position; Power saving |
|
| RCA-SA6C-I-30-3-200-A1-S-HS |
RCA; ROBO cylinder slider type; Width 58mm, 24 V servo motor, cupling specification; Incremental encoder; 30 W motor; 3 mm pich; 200 mm Travel; A1 Controller; 3 Mt standard cable; Home sensor |
|
| RCA-SA6C-I-30-3-200-A1-S-HS-LA |
RCA; ROBO cylinder slider type; Width 58mm, 24 V servo motor, cupling specification; Incremental encoder; 30 W motor; 3 mm pich; 200 mm Travel; A1 Controller; 3 Mt standard cable; Home sensor;Power saving |
|
| RCA-SA6C-I-30-3-300-A1-S-HS-LA |
RCA; ROBO cylinder slider type; Width 58mm, 24 V servo motor, cupling specification; Incremental encoder; 30 W motor; 3 mm pich; 300 mm Travel; A1 Controller; 3 Mt standard cable; Home sensor |
|
| RCA-SA6D-I-30-12-500-A5-N |
; RoboCylinder Slider Type, 24 V Servomotor; 58mm Width, direct copupled; Incremental encoder; 30 W servo motor; 12 mm pich; 500 mm Travel; A5 Controller; no cable |
|
| RCA-SA6D-I-30-6-400-A5-N |
; RoboCylinder Slider Type, 24 V Servomotor; 58mm Width, direct copupled; Incremental encoder; 30 W servo motor; 6 mm pich; 400 mm Travel; A5 Controller; no cable |
|
| RCA2-MU4A-B |
RCA2; Motor replacement of unit RCA2-TA7C-I-30-6-100-A1-X10-B |
|
| RCA2-RN3NA-I-10-2-50-A5-N-LA |
; ROBO cylinder miniature; Rod type, short lengh, fixed nut type, actuator width 28mm, 24 V servo motor, lead screw specification; Incremental encoder; 10 W motor; 2 mm pich, ball screw; 50 mm Travel; A5 Controller; No cable: Power saving option |
|
| RCA2-RP3NA-I-10-4-30-A1-N-K2 |
; ROBO cylinder miniature; Rod type, short lengh, Tapped hole type, actuator width 28mm, 24 V servo motor, ball screw specification; Incremental encoder; 10 W motor; 4 mm pich, ball screw; 30 mm Travel; A1 Controller; No cable, Reversed cable exit directi |
|
| RCA2-RP4N-I-20-2-30-A1-S |
RCA2; Mini ROBO cylinder; Rod type, short lengh, Tapped hole type, actuator width 34mm, 24 V servo motor, ball screw specification; Incremental encoder; 20 W motor; 2 mm pich; 30 mm Travel; A1 Controller; 3 Mt robot cable |
|
| RCA2-RP4N-I-20-2-30-A1-S-LA |
RCA2; Mini ROBO cylinder; Rod type, short lengh, Tapped hole type, actuator width 34mm, 24 V servo motor, ball screw specification; Incremental encoder; 20 W motor; 2 mm pich; 30 mm Travel; A3 Controller; 3 Mt robot cable |
|
| RCA2-SA5C-I-20-12-350-A1-S-LA |
RCA2; ROBO cylinder slider type; Body width 50mm, servo motor, coupling specification; Incremental encoder; 20 W motor; 12 mm pich; 350 mm Travel; A1 Controller; 3 Mt robot cable |
|
| RCA2-SA5C-I-20-12-400-A1-S-LA |
RCA2; ROBO cylinder slider type; Body width 50mm, servo motor, coupling specification; Incremental encoder; 20 W motor; 12 mm pich; 400 mm Travel; A1 Controller; 3 Mt robot cable |
|
| RCA2-SA6C-I-30-6-200-A1-S |
RCA2; ROBO cylinder slider type; Body width 60mm, servo motor, coupling specification; Incremental encoder; 30 W motor; 6 mm pich; 200 mm Travel; A1 Controller; 3 Mt robot cable |
|
| RCA2-SA6C-I-30-6-300-A1-S |
RCA2; ROBO cylinder slider type; Body width 60mm, servo motor, coupling specification; Incremental encoder; 30 W motor; 6 mm pich; 300 mm Travel; A1 Controller; 3 Mt robot cable |
|
| RCA2-TA4C-I-10-4-80-A1-M |
RCA2; ROBO cylinder table type; Body width 40mm, servo motor, coupling specification; Incremental encoder; 10 W motor; 4 mm pitch; 80 mm Travel; A1 Controller; 5 Mt standar cable; |
|
| RCA2-TA7C-I-30-6-100-A1-X10-B |
; ROBO cylinder TA; Body width 75mm, pulse motor, cupling specification; Incremental encoder; 30 W motor; 6 mm pich; 100 mm Travel; A1 Controller; 10 Mt robot cable; With brake |
|
| RCA2-TC4N-I-20-4-30-A1-P |
Mini ROBO cylinder; Table type, short lengh compact type, actuator width 36mm, 24 V servo motor, lead screw specification; Incremental encoder; 20 W motor; 4 mm pich; 30 mm Travel; A1 Controller; 1 Mt robot cable |
|
| RCA2-TCA3NA-I-10-1-50-A5-M |
; ROBO cylinder miniature; Table type, short lengh compact type, actuator width 32mm, 24 V servo motor, lead screw specification; Incremental encoder; 10 W motor; 1 mm pich, ball screw; 50 mm Travel; A5 Controller; 5 Mt robot cable |
|
| RCA2-TCA4NA-I-20-2-30-A3-N |
; ROBO cylinder miniature; Table type, short lengh compact type, actuator width 36mm, 24 V servo motor, lead screw specification; Incremental encoder; 20 W motor; 2 mm pich, ball screw; 30 mm Travel; A3 Controller; No cable |
|
| RCA2-TCA4NA-I-20-2-30-A3-P |
; ROBO cylinder miniature; Table type, short lengh compact type, actuator width 36mm, 24 V servo motor, lead screw specification; Incremental encoder; 20 W motor; 2 mm pich, ball screw; 30 mm Travel; A3 Controller; 1 Mt robot cable |
|
| RCA2-TFA4NA-I-20-2-30-A5-N-K2 |
; ROBO cylinder miniature; Table type, short lengh compact type, actuator width 71mm, 24 V servo motor, lead screw specification; Incremental encoder; 20 W motor; 2 mm pich, ball screw; 30 mm Travel; A5 Controller; No cable; Cable exit K2 |
|
| RCA2_GD4N_ACC |
